RTD Sensors Dealers in Mumbai

• Certification: CE Certified
• Application: Temperature Scaling
• Voltage: 0-15VDC
• Frequency: 50Hz
• Power: 0-5W
• Driven Type: Electric
• Feature: Safety Interlocks
• Warranty: 1 Year

We have carved a niche as Manufacturer and Supplier of Weatherproof Head Thermocouples & RTD Sensors from Maharashtra, India. We are backed by a team of skilled and adroit personnel who design them using sophisticated machines and attest techniques. One of the important elements of dependable Temperature measurement, they are widely used as Temperature Sensing Elements. Without burning any hole in your pockets, our Thermocouples and Sensors are inexpensive.

•  :  
• Type of Element: Cylindrical Sensors, Flat Film Sensors,Pt with Ceramic Coating
• Thermowell: As per customer requirement
• Sensor Body: Mineral Insulated metal sheathed
• Material Used: SS304,SS316,SS321

RTD's with class A elements Simplex / Duplex designs SS 316 design Widely used in Pharma Industries .

• Features: Low maintenance, Highly efficient

We offer ingle element stator winding rtds. Flat, laminated “stick” rtds fit in slots between stator windings to monitor temperature rise and prevent overheating. The national electrical manufacturers association (nema) recognizes embedded detectors as a standard protection for motor and generator insulation. unlike on-off devices, rtds provide continuous sensing for earlier warning without unnecessary tripouts. The sensing elements of stator rtds extend through most of the body length to provide an average temperature reading. This eliminates the danger of a point-type sensor missing a localized hot spot. Six sensors are recommended for each motor, two per phase. Locate sensors near the hottest point of the windings for best performance. Manstronics® stator rtds meet the specifications of ansi c50.10-1990, general requirements for synchronous motors.

• Material: SS
• Temperature Range: 100 deg C to 260 deg C
• Country of Origin: Made in India
• Usage/Application: Industrial
• Brand: D B Instruments
• Element: Simplex,Duplex
• Sheath size: 1 mm to 25 mm
• Triclover Connections: 0.5",1" and 1.5"

Canopus Instruments provides multi-channel temperature scanners designed to interface with 8 12 16 channels of 3-Wire RTD PT-100 inputs as per the user requirement.

• Application: Industrial
• Temperature Range: -40 to 450 deg C
• Probe Material: Stainless Steel
• Accuracy: Class B
• Probe Diameter: 8 - 20 mm
• Sensor Connection Wiring: 2 Wire

• Feature: Industrial approved design , Enhanced service life, Optimized operation .

•  : Specification:
•  :  

  Flat, laminated “stick” RTDs fit in slots between stator windings to monitor temperature rise and prevent overheating. The National Electrical Manufacturers Association (NEMA) recognizes embedded detectors as a standard protection for motor and generator insulation. Unlike on-off devices, RTDs provide continuous sensing for earlier warning without unnecessary tripouts. The sensing elements of stator RTDs extend through most of the body length to provide an average temperature reading. This eliminates the danger of a point-type sensor missing a localized hot spot. Six sensors are recommended for each motor, two per phase. Locate sensors near the hottest point of the windings for best performance.. This RTD are generally flat type in construction and are available in various sizes. Thermo  stator RTDs meet the specifications of ANSI C50.10-1990, general requirements for synchronous motors.             Slim dimensions to get inserted in between windings   Bifiliar design that prevents induction voltage resulting in measurement errors   Resistance to shock, vibration and pressure   Withstand of Vaccum Pressure Impregnation Process   Dielectric Strength   Single and dual element RTDs      

• Brand Name: HTE
• Country of Origin: Made in India
• Temperature Range: -50 to 650 degree C
• Cable Length: 1-1.5 m
• Accuracy: 0.05%
• Packaging Type: Box
• Measuring Temperature: -200 to + 500 Degree Celsius
• Probe Diameter (mm): 3 mm

• Type: Simplex and duplex.
• Insulation of cables: 7/32 Teflon, Teflon/Teflon, Insulated.
• Type of cable: 2 core, 3 core, 4 core and 6 core.
• SS rod: 316 stainless steel material with 8mm diameter
• Mounting parts: 1/8 BSP, 1/4 BSP, 1/2 BSP and 3/8 BSP and without threading.
• Head: Aluminum with powder coated.
• Terminal: 2 or 3 wires for simplex , 4 or 6 wires for duplex
• SS rod: 316 stainless steel material with 8mm diameter
• Mounting parts: 1/8 BSP, 1/4 BSP, 1/2 BSP and 3/8 BSP and without threading

We manufacture different types of temperature sensors as per the specifications of the customer by using PT100 sensing element and maintain international quality. The element of PT100 sensors has been imported from Germany and the SS rod is made up of 316 stainless steel material, which enables it to withstand a high pressure vessel. The sensor has been designed in such a manner that it is well suited for temperature measurement in any industrial environment, especially around motors, generators and other high voltage equipment. The range of the PT 100 sensor varies from 0-400 degree.

• Element: 3-wire Pt100 element in simplex or duplex assembly
• Housing: ABS housing (IP65)
• Sheath Diameter: 8 mm sheath diameter
• Lengths: 50 mm, 100 mm, 150 mm
• Temperature: 5 to 80C
• Optional: Temperature transmitter and cable optional
• Minimum Order Quantity: 1 Piece(s)

• Type: : Protection Tube
• Wetted Parts: : Ceramic
• Minimum OD: : 3mm
• Maximum OD: : 10mm
• Connection: : 1/2" - 1"
• Wire / Connector: : Teflon

Air & flue gas service in power plant application, General industry application, Furnace temp, measurement etc.   Special Features : Mineral insulation. Available in all sheath diameters Mineral insulation enables flexibility and durability. Enclosures in all material - Die cast Aluminium / Cast Iron / SS 304 /SS316 Enclosures in all categories (Weatherproof, IP-65 to IP-68, Flameproof Gr. HA IIB and Explosionproof, Gr. HA, IIB, HC for Hservice application.) Reference standard :- IEC - 751.  

• Range: - 50 to 400°C
• Lengths: upto 500 mm
• Protection Tubes (outer dimension): 7, 9, 11 and 12 mm
• Protection Tubes (Other materials available): SS316 and SS316L
• Features: Easy maintenance, Impact and vibration resistant, Leak proof joint, Aluminum head with threaded cap

Radix Mineral Induslated RTD sensors are made with compacted magnesium oxide (MgO) that make our sensors durable and vibration resistant. This range of products is widely used in industries like chemicals, food and pharmaceuticals. The measuring element in Mineral Insulated RTD can be designed in several configurations and conforms to the IEC 751 standard for RTD sensors. The sensors are made with weatherproof aluminium heads that protect the inner construction. As per the application, these mineral insulated RTD sensors can be constructed of Pt50, Pt100, Pt200, Pt500 or Pt1000; with 2, 3 or 4 wire single or dual assembly; and in Class A or B. Radix Mineral Insulated RTDs with Terminal Head offer high-utility by virtue of the mineral insulated sheaths which can be very long and bent or coiled as per the application. Choose from standard assemblies, free rotating fittings, hex nipples, round nipple connections, NUN assemblies, adjustable compression fittings, fixed flange connections or adjustable flange connections.  Variety of measuring element configurations Bendable sheath up to 50 meters long 50 mm long non bendable tip Temperature range: -50 to 400°C range 3, 4, 5, 6 and 8 mm diameters Different types of terminal heads available SS316L sheath material Copper or Nickel conductors

We have a team of efficient personnel who sternly check the raw materials before final procurement. Thus, we ensure a qualitative array of products at customer's end. We are acknowledged for providing safe transaction modes for the payments which include online as well as offline method. Thus, we accept cash payments along with bank transfers. Resistance Temperature Detector has a sturdy body with high precision and a long service life.         

We offer H.t. Motor Bearing Temperature Detectors. This Mercury in Steel Bearing Temperature Detector is designed to protect the Bearing of Large Industrial Motors H.T. Motors from danger of overheating. Case : Heavy duty die cast aluminium stoved enamelled Black finished IP-55 weather proof, surface mounting case. Dial Size : 150mm Range : 0° to 120°C Capillary : 2 mtr long fine bore steel capillary covered on with solid drawn Red Duralleum-Teflon capillary, flexible at bottom entry of the case. BulbStem : AISI SS 316 Angle Bulb with 90° bend, 10mm OD x 50mm Long Connection : AISI SS 316, 14” BSP(M) connection with Spring, for tight fitting Contacts : 2 Nos N.O type Independently adjustable Potential Free Electrical Disc type contacts for Alarm & Trip Mechanism. Contact Rating : 5 A 230 V AC 1 A 220 V DC (with Built in Relays) Junction Box : Provided with Terminal Junction Box at bottom entry of the case. Zero Adjust : Provided with External Zero Adjustment

RTD'S are high precision device used to measure temperatures in corrosive and non-corrosive media. They work on the principle of variation of resistance of a sensing element, usually made of Platinum, with corresponding change in temperature. These RTD's are available in following types : PT100, PT200, PT500, & PT1000 (AS PER DIN 43760 OR BS904 CLASS II) Pt50 (as per JIS) Simplex or Duplex. THERMOCOUPLE : A thermocouple is a sensor for measuring temperature. It consists of two dissimilar metals, joined together at one end which produce a small unique voltage at a given temperature. This voltage is measured and interpreted by a thermocouple thermometer.   These thermocouples are available in three types of hot junctions : The Grounded Junction : Recommended for the measurement of static or flowing corrosive gas or liquid temperature and for high pressure application. The junctions are welded to the protective sheath giving faster response. An Underground Junction : Used for measurement in corrosive application where it is desirable to have the thermocouple electronically isolated form and shielded by a seath. The junction is physically isolated from the sheath from MgO powder. An Exposed Junction : It is used for the measurement of static or flowing non-corrosive gas temperature where fast response time is required. The junction extends beyond the protective seath to give accurate and fast response. The seath insulation is sealed where the junction extends to prevent penetration or moisture or gas which would cause.       Types of Assemblies available: Terminal Block Type/ Whether Proof IP 65 Or Flame Proof head mount Hand Held Type.  Mineral Insulated Metal Sheath.  Transition Joint Type.  Quick Disconnect.  Thermocouple with special outer sheaths like silicon Carbide, PTF, PVDF coated etc. Mountings: Fixed male threaded, addittion, Gland type, Nipple - Union, Nipple assembly or adjustable flanged types, Bayonet type and others. Insulations: Multibore ceramic tubing / Magesium Oxide (MgO filled) / M.I. Ordering informations for Thermocouples and RTDs: Operating Range, RTD/Thermocouple's type & Class - [ K / J / T / E / B / R / S - Simplex or Duplex, ] Specify Wire Gauge in case of Thermocouple,  Type of RTD Element & Class  Head Assembly Weatherproof / Ex. Proof, Seath Material - Length & O.D.,  Extension cable material - It's covering length, Process connection, Wire connection - 2 Wire / 3 Wire / 4 Wire                          

• Feature: High tensile strength, Rust proof, Easy installation

TEMP TECH manufacturers Resistance Temperature Detectors (RTD’s) confirming to all international Standards like IEC 751 , GOST, BS-1904, DIN 43760, JIS C1604, 1606 etc…. All types of configurations are available and most of the RTD’s are custom made. Accuracy in measurement of Temperature, faster response, sturdiness, ease in maintenance and replacement are the main criteria of design. All RTD’s are calibrated in our Te

TEMP TECH manufacturers Resistance Temperature Detectors (RTD’s) confirming to all international Standards like IEC 751 , GOST, BS-1904, DIN 43760, JIS C1604, 1606 etc…. All types of configurations are available and most of the RTD’s are custom made. Accuracy in measurement of Temperature, faster response, sturdiness, ease in maintenance and replacement are the main criteria of design.

Canopus Instruments is one of the top manufacturers & suppliers of rtd scanner, resistance temperature detector, temperature scanner, 16 channel temperature scanner in India. The rtd temperature scanners, resistance temperature detector, temperature scanner, 16 channel temperature scanner that Canopus manufactures are of top quality and highest standards. Get in touch with us to know the details of the products.CANSCAN 1.0 is Multi Channel Scanner designed to interface with 8 12 16 Channels of 3-Wire RTD PT-100 inputs as per the user requirement. The input channels are sequentially scanned and displayed on the front panel. Measured values are compared with set points to generate Alarm conditions.

We cater to high precision Resistance Temperature Detector that is used in a number of industries. The Resistance Temperature Detector is manufactured & available in Simplex, Duplex and Triplex configuration. We also offer Pt 1000 Platinum RTD depending upon the requirement.

Ptfe insulated rtd cables rtd cables manufactured by bhuwal cables are used as connecting lead wire between rtd sensor and temperature indicator device. Rtd cables are made in 2 core, 3 core, 4 core and 6 core configurations, 3 cores being the most commonly used configuration. Construction: - rtd cables are made in three common constructions for making them suitable for different situations. These are ptfeptfe = this is the most common construction. In this the cores are insulated with ptfe and then cores are twisted and jacketed with ptfe. Ptfefg = in this construction cores are of ptfe and jacket is of fiber glass braid. This is used when rtd cable has to be installed in high temperature environment. Ptfespcptfe: - in this construction a spc wire braid shield is provided between twisted cores and jacket. This type of cable is used where higher accuracy is required. The current and voltage signals in rtd cables are of very small magnitude and can get affected by external electromagnetic noises produced by external devises such as motors, electronic equipments etc near the cable. The spc shield is grounded from one end and this protects the signals in the cable from these external noises.

• Temperature Range: -200 to 600 deg C
• Application: Industrial
• Termination Type: Terminal Head Assembly
• Probe Material: Stainless Steel
• Probe Diameter: 8 - 20 mm
• Sensor Connection Wiring: 2 Wire
• Cable Length: 2 m
• Probe Length: 150 - 300 mm