Rubber Hose / Rubber Hose Pipe Dealers in Goregaon, Mumbai

• Brand Name: ASHOFLEX
• Material: PVC
• Diameter: 10 MM TO 300 MM
• Length: 30 METRE
• Place of Origin: INDIA

ASHOFLEX Steel Wire Reinforced Flexible Grey Vinyl Hoses. Available in sizes from 10mm to 300mm (12 inch to 12 inch).

The inside diameter of the hoses must be adequate to keep pressure loss to a minimum and avoid damage to the hose arising as a result of heat generation or excessive turbulence. Hoses outside diameter can be a critical factor when hoses roufing clamps are used or hoses are routed through bulkhead, check individual hose specification table for O.D.'S. Both fluid and ambient temperature must be considered while selecting a replacement assembly. The hoses selected must be capable to withstand minimum and maximum temperature of system. While selecting a hoses for its maximum temperature care should taken that temperature stated is not an intermittent value.   APPLICATIONDetermine where or how the replacement hose or assembly is le used.   Equipment Type: - Most often only a duplicate of the original hose will have to be made. Make sure all the requirements of the application are fulfilled. While selecting hoses, its application should be considered i. e. Static / Moving / Flexing.   Working Pressure: - Check individual hose specification table for working pressure. The working pressure or operating pressure is one fourth the hose minimum burst pressure.   Pressure Surges: - In hydraulic systems, where pressure surges are severe, increase the safety factor when selecting the proper hoses (safety factor working / burst = 1/5) Conversely, in systems where pressure surges are slight or nonexistent, the normal safety factor must be chosen.   Environmental Conditions: - Care must be taken to ensure that the hoses and fittings are either compatible with or protected from the environment to which they are exposed. Environment conditions including but not limited to ultraviolet heat, ozone, moisture, water, salt water, chemical and air pollutants can cause degradation and premature failure and therefore must be considered.   Mechanical Load: - External forces can significantly reduce hoses life. Mechanical loads which must be considered include excessive flexing, twist, kinking tensile or side loads, bend radius vibration. Use of swivel type fitting or adaptors may be required to ensure no twist is put into the hoses. Unusual applications may require special testing prior to hose selection.   Hose Construction: - Various application may require different hoses constructions. For construction please check individual hose specifications.  

• Type: Dredging Floats
• Color: Orange
• Shape: Cylindrical
• Warranty: 6 Months
• Pattern: Plain
• Quality: Best

SanFloats 2 Halves Dredging Floats are high impact polyethylene floats in two halves with joining system. Made from marine grade raw material, these 2 Halves Dredging Floats can withstand rough sea conditions. These 2 Halves Dredging Floats are buoyant, impact absorbing and UV protected. 2 Halves Dredging Floats are also available in eco-friendly foam filling. Applications : Dredge Pipelines Marine Hoses Cable hoses Aquaculture breeding area cages Swimming Pool markers Ocean filth blockers  Features : Lightweight – easy installation – secure nut bolts system and tightening belts Marine grade galvanized accessories. Thick PE shell with ecofriendly PU filling for maximum impact resistance Superb flexible system for rough sea conditions Excellent weathering & UV resistance Color options available Quick online maintenance without taking off line.

Western Rubbers made silicone braided hose with ss crimping end are a blend of flexibility and strength. Their Ultra flexibility, fiber reinforcement, and FDA compliance make them one of the most suitable media for fluid transfer. These hoses are made up of nylon reinforcements which enhances its physical property to withstand compressive as well as bulk expansion forces.  The end clamps are custom fit as per users required lengths. The crimped end clamps are made in SS 316L for FDA compliances.   Salient Features of Silicone Braided Hose with Tri-Clamp End.  Autoclavable and Sterilizable hose Easy fit because of Tri-Clamp Ends. Walls can withstand vacuum pressure. Chemical resistance to a wide range of chemicals Available in color coding for easy identification Ultra-Flexibility and bending radius US FDA and USP class Vl compliant   Applications  Pharmaceutical industry for bulk drug transfer Chemical plants for high pressure fluid flow Life science Laboratory for tissue culture Food processing plants Transfer of dairy products Fluid transfer in confectionary industry    

• Brand Name: Sanipure Water Systems
• Material: Stainless steel with Teflon coatings
• Category: Industrial Hose
• Product name: Steam Hoses
• Min order Qty: 10pc
• Features: Aesthetic look Corrosion-free Precision made Smooth surface finishing Highly durable Cost-effective

THESE HOSES ARE USED FOR TRANSFER OF ALL KINDS OF CHEMICAL FROM HIGHLY CORROSIVE IN NATURE TO MILD CHEMICALS Specification: 2" TO 8" ID Features: HIGHLY CORROSIVE NATURE

• Pressure: as per size
• Brand Name: BSH
• Size: 1/2 inch, 3/4 inch, 1 inch, 2 inch, 3 inch
• Single Hose Length: 20m-30m
• Temperature: as per standard
• Application: Hydraulic System With Petroleum Or Water Glycol Base Fluid & For Fuel And Lubricating Oils
• Bursting Pressure: as per standard
• Diameter: 1/4
• Temp. Range: -40°c. To + 120°c. (intermittent Use Upto125°c.)
• Item Code: SAE-100-R1

Silicone rubber tubing mainly adopts raw materials from Japan, USA, and Germany. It is widely used in electrical appliances, illuminations, and medical devices. It can be manufactured into highly transparent, semitransparent, milky white, large and small inside diameter, thin and thick wall products with fda grade or medical grade silicone material.

Silicone braided hose is thick tubing in which a polyester or  Nylon multifilament yarn braiding is sandwiched between two silicone layers to give reinforcements. These hoses can withstand high pressure due to reinforcements.  Due to the rigidity of the structure, certain silicone steel coiled hoses are extremely efficient in preventing wall collapse during vacuum pressure. Western Rubbers India Pvt Ltd. has the expertise and in-house facility to manufacture these hoses These food grade silicone hoses are extensively used in Pharmaceutical, healthcare, cosmetics, and life science fields because of their transparency, chemical inertness, and rigidity. Chemically extremely stable and suitable for use with many acids, alkalis and other pharmaceutical cleaning agents. Hence one of the best material for transfer of fluid under high pressure.   Benefits of using our silicon braided hose:- 100% food grade ( FDA Compliant USP-21CFR177.2600 and USP Class Vl complaint) USP-28 Toxicology tested UV, ozone and Corona resistant Burst pressure test certified hoses. Autoclavable. Standard sizes available ex-stock   Types of silicone braided hose:- Silicone hose with single nylon braided Silicone double braided nylon hose fabric wrapped silicone braided hose Steel coiled silicone hose (Note: Stainless steel Clamp fitted in custom lengths on request)   Applications for silicone braided hose:- Transfer and monitoring of high pressurized fluids in pharmaceutical industry Used in Dairy industry because of chemical stability Health care and cosmetics industry use silicone braided hoses to transfer raw materials Used for transfer of bacterial growth feeds and Ph balancing fluids in life sciences and virology labs.

• Type: Vacuum Hose Pipe
• Material: Rubber
• Nominal Size: 3 inch, 16 inch
• unit Length: 6m, 3m
• Diameter: 20 -30 mm

• Material: R1
• Working Pressure: 250 bar
• Brand Name: Selixble
• Color: Black
• Size/Diameter: 1/4"-2"
• Usage/Application: Hydraulic fluid
• Length: Custom
• Features: Varied specifications, Excellent durability, Economic rates

• temperature: -40°F to +250°F.

Hydraulic Spiral Hose high-pressure bearing hydraulic hoses that provides for longer service life as well as offers optimum performance and usage flexibility.These hoses come extensively tested as well as can handle temperature range from -40°F to +250°F. Some of its standard features include meeting usage needs with demanding equipment, available in low-pressure to ultra-high pressure hose forms, provides for peak performance and flexibility, suitable for use with biodegradable hydraulic fluids, abrasion-resistant cover and others.

Accurate Rubber Industries is leading high quality Industrial Silicone Rubber Products Manufacturers & Suppliers in Mumbai (India).

Silicon Molded Hose, Silicon Bush, surgical rubber products

reinforced rubber lined fire hose pipes, Hose Pipes, Hydraulic Pipe

Dredging Rubber Hoses, Moulded Backing Flanges PE Blind Flanges

Rubber Silicon Hose, Inflatable Seal Silicone FDA Compliant

Turbo Charger Hoses, Safe Power Lines Accessories, automotive adhesives

Rubber Hoses, O Rings, natural items, Rubber Compounds, silicone components

Silicon Pressure Hoses, Buffer seal, silicone rubber strips, Rubber Grommets

Parker High Pressure Hydraulic Rubber Hose Assemblies

silicone hose pipe, Suspension Bushes, rubber seal rings, Rubber Gaskets

Rubber Hoses, Gas Pipes, Gas Hoses, LPG Hoses, kitchen lpg pipe