Rubber Seals Dealers in Malad West, Mumbai

• Size: 10inch, 2inch, 4inch, 8inch
• Material: Aluminum, Metal, Neoprene Rubber, Nitrile Rubber, Rubber
• Shape: Round
• Thickness: 10-20mm, 20-30mm, 30-40mm, 40-50mm
• Application: Industrial
• Color: Black, Golden, Grey
• Condition: New, Used
• Feature: Accurate Dimension, Easy To Install, Fine Finish, Good Quality, Heat Resistant, Robust Construction, Unbreakable

We manufacture the dowty seals as per the industry requirement. The basemetal ring used is M. S. (mild steel). Normally the industry used the basemetal ring by turning from pipes. We used press metal washers O rings so that the concentricity & flatness of the washer remains within 0-0.05%.

The Seal Type 21 is a Compact Single Spring Rubber Bellow Mechanical Seals for universal general purpose for Water / Water Based Solution like Oils, Fuels and Other Fluids and even with some Content with Abrasive and for a very wide operating condition designed for Centrifugal Pump. Rotary Equipment and Industrial applications (Food Processing, Water System, Waste Water Treatment for Petrochemical Processing, Pulp and Paper) Features Single, low cost and mass produced Mechanical Seal with Rubber Bellow. Central Point Non-Clogging Coil Spring Seal. Spring Design Seal is suitable for duel-direction of Shaft Rotation. Bellow Design Seals for Pressure supported and eliminates folds. Bellow Seals Protecting against Twisting. Unitize, easy-to-fit design seals Materials Seal Ring Faces : Cabon, SiC and TC Seat Faces : NiR, Ceramic, SiC and TC Elastomer : Viton, Neoprene, EPDM, NBR and Buna-N MOC : SS 304 / SS 316 Operating Capabilities Shaft Dia. : 10mm to 100 mm Pressure : Up to 8 bar Temperature : -20oC to 180oC Speed: 3000 r.p.m.   Rubber Bellow Seals have been carefully designed and manufactured with great precision and care. Please Visit us to see our full range of Rubber Bellowl Seals to meet all your requirements. We are the manufacturer of Rubber Bellow Mechanical Seal in Mumbai INDIA.

• Material: Neoprene Rubber
• Width: 100-500mm
• Feature: Easy To Fir, High Grade Material Used, Oil Resistatn, Premium Quality, Water Prood

➤ diaphragms are sealing agents, used as moveable membranes to prevent two or more components from leakage and friction. The flexible nature of this seal allows pressure effects to cross the barrier but not the material being contained. ➤ we can manufacture rubber diaphragms which are bonded with brass, mild-steel or stainless-steel studs. We also manufacture diaphragms that are metal inserted, gasketed, teflon laminated or that are reinforced with fabric, nylon, canvas, wire mesh, etc. ➤ applications: electrical & pneumatic control valves, pressure regulators, saunders valves, solenoids valves, high pressure pumps, actuators, gas regulators, angle valves, brine filter valves, dust collectors, spray pumps, etc

• Shape: ROUND
• Material: Neoprene Rubber, Nitrile Rubber
• Usage/Application: Industrial

• Material: Silicon
• Condition: New
• Packaging Type: Box
• Application: Connecting Joints, Pipes, Tubes
• Feature: Easy To Install, Fine Finish
• Thickness(mm): 2.0, 1.0

• Material: Rubber
• Shape: Round
• Application: Connecting Joints, Pipes, Tubes
• Size: All Sizes
• Feature: Accurate Dimension, Easy To Install, Good Quality, Robust Construction
• Type: Natural Rubber Seals
• Country of Origin: India

• Features: Excellent finish, Chemical resistance, High durability, Negligible maintenance, High temperature resistance, High tensile strength

we at vardhman bearingss veer enterprises are engaged in offering a comprehensive range of Industrial Rubber Products. These products are at par with the standards of ASTM, BS, DIN and IS. Owing to the optimum quality. Our products are widely used in Pharmaceutical, Food, Automotive, Chemical and Engineering Related Industries. For the maximum convenience of our clients, we also provide customized services & packaging for these products as per the specifications given by our clients.

Mechanical Seals that we offer are in compliance with the standard of DIN24960. We offer single face, balanced and metal bellows seal, which can be rotated at will. Our Mechanical Seals are widely applied in steel industry, mining, petrochemical industry, refining and fertilizer industry. We make available Mechanical Seals in bulk and at market leading rates. Also, timely delivery is guaranteed.    More About Mechanical Seals : The rotating O ring and flexible carbon ring without compensation function and the movement of bellow without resistance are suitable for high temperature and high viscosity mediums. Sub-materials of friction and auxiliary materials should be selected according to operation condition. Specifications : Sealed Medium : Oil, acid, alkali, average corrosive mediums, etc. Pressure in the sealed chamber : Less than 2.5Mpa (with external pressurization) less than 1.5Mpa (with internal pressurization) Temperature in the sealed chamber : -20~400 Linear velocity : Less than 15m/s

Rubber Oil Seals, oil seals, Cable Lugs, Cable Connectors, O Ring

• Material: Rubber
• Shape: Sheet
• Thickness: 0-10mm
• Color: Black, Grey
• Feature: Premium Quality, Suprior Finishing
• Pattern: Plain

We are offering the high quality Rubber Diaphragms to our clients, which are coated with the Teflon to deliver commendable long-lasting performance. To adhere with international quality standards, these Rubber Diaphragms are manufactured from ultra quality raw materials sourced from authentic vendors. The Rubber Diaphragms are assured to deliver extraordinary long lasting performance in compliance with our esteemed client's expectations. Highlights : Premium quality rubberHeat resistanceAccurate dimensionAbrasion resistance

The diaphragms rubber / PTFE we offer are manufactured using qualitative raw material procured from trustworthy vendors. These are widely used in various industries and have gained huge accreditation in the industry for their host of exclusive features. The entire range can also be customized as per the specification detailed by the clients.  The diaphragms rubbers we manufacture are available in various sizes ranging from 5 mm to 1000 mm. Our range of diaphragms is manufactured using PTFE / ELASTOMERIC materials that have the capacity to withstand harsh weather conditions. We make use of almost all types of material that comprises of Nitrile, EPDM, Neoprene, Fluorosilicone, Silicone, SBR, Fluoroelastomers Viton.,PTFE. Salient Features: . Long life cycle . Long stroke capability . No breakaway friction . Constant effective pressure area . No lubrication required . Little or no spring rate . Can be used in extreme pressure

• Thickness: 10-20mm, 20-30mm, 30-40mm, 40-50mm
• Packaging Type: Packet
• Outer Diameter: 5mm, 10mm, 20mm
• Inner Diameter: 30mm, 40mm, 50mm
• Feature: Unbreakable, Heat Resistant, Good Quality, Fine Finish, Easy To Install
• Size (Inches): 2Inch, 4Inch, 6Inch, 8Inch, 10Inch
• Pressure (Bar): 25 Bar
• Seal Width: 10mm
• Seal Length: 100mm
• Type: Industrial Seals
• Material: Steel
• Shape: Round
• Color: Black
• Condition: New
• Finishing: Polished
• Country of Origin: India
• Material Grade: SS304
• Suitable For: Water
• Sealing Type: Mechanical
• Automation Grade: Automatic
• Usage: Oil Industry
• Chemical Resistance: Yes

We offers mechanical seals such as dry running seal,dry running mechanical seal high speed and more.

Our company manufactures and supplies a wide range of rubber diaphragms which are highly resistant to various media at different pressure levels. Molded diaphragms are tough, versatile dynamic seals that eliminate virtually all of the limitations associated with other sealing methods.These diaphragms cater to various applications for motors, pumps and valves. We can also manufacture customized rubber diaphragms as per specific requirements of our clients.

Series LPA90S Multi-spring pusher seals are designed and qualification tested according to the stringent testing norms specified by API 682 standard. These dependable, engineered mechanical seals are developed to attain extremely low emmissions, typically to less than 150ppm. These seals are offered in single, dual unpressurized and dual pressurized arrangements for awide range of petroleum and light hydrocarbon Services in refinery and petrochemical industries. To extend seal life beyond 25000 hours of operation. To reduce emission levels. To ensure plant and personal safety in hazardous environments. To standardise the seals and sealing systems.

The silicon carbide rings, bearings, bushings have the advantages of excellent thermal conductivity, self-lubricity, low thermal expansion. It can be widely used in the petroleum, chemical, food, machinery and motors industries. The friction between silicon carbide and carbon graphite is the least; so it is widely used as mechanical seals. Commonly Silicon Carbide are available in Alfa Sintered(SSIC) Grade and Reaction bonded Grade as per following specification.

nbr seals, Chevron Packings, Industrial Rubber Component, oring

Owing to the optimum quality. Our products are widely used in Pharmaceutical, Food, Automotive, Chemical and Engineering Related Industries. For the maximum convenience of our clients, we also provide customized services & packaging for these products as per the specifications given by our clients. Apart from this, we also provide paid samples of these products, so that our clients get the prior idea before purchasing them finally. Owing to these factors, we have been able to earn the trust of our esteemed clients. Some of the international markets, where we cater our products.

The company deals in the finest quality rubber bellow seals in the market. Our enclosed rubber bellows seal is available with bonded joints and all the face substance can be interchanged without actually modifying any dimensions. These rubber bellow seals are commonly used in sewage pumps, waste water pumps and fuel injection pumps. Besides, we are one of the largest rubber bellows component seal manufacturers in the business. Applications: Generally used in sewage applications, waste water pumps, & fuel injection pumps. Material: Seal Faces: Carbon Vs Ceramic/Sic/TC Secondary Seals: Nitrile/ Neoprene/Viton Metal Components: SS-316 Operating Limits: Shaft Dia.: 10 to 100mm Pressure: up to 10 Bars Temp.: -20 to 150°C Speed: up to 25 m/s

• Thickness: 3 mm - 10 mm
• Hardness: 30 - 40 Shore
• Material: Natural Rubber
• Density: 2.1 - 2.3 g/cm3
• Diameter: 10 - 50 mm
• Packaging Type: Polybag

Rubber Seal, Rubber O Ring, Rubber Washer, teflon washer, Nylon Washer

• Type: Various
• Brand Name: HIFAB
• Application: Chemical plants, Petrochemical , Refinery,Pharma Industry, Food & Beverage etc

Manufacturers and exporters of Mechanical seal for Pumps, Agitators, Mixers , Glass Enameled Reactors , Agitated Nutsche Filters and other processing equipment.

Dowty Seals, metal bonded seals, Spiral wound gaskets, Silicone Gaskets

Mechanical Seals

Rubber Bellow Seal, 2100 Mechanical Seal, Crane Type Mechanical Seal