Rubber Tube Dealers in Dahisar, Mumbai

• Color: Transparent
• Material: Silicone
• Length: 3 m
• Hardness: 70 Shore A
• Packaging Type: Roll
• Temperature: -180 to 600 Deg F
• Density: 1.2 g/cube Cm
• Nominal Size: 3/4 Inch

We are the largest manufacturer and exporter of Rubber Cords in Mumbai, Maharashtra. Our Rubber Cords are highly demanded due to its strength, reliability and reasonable price. These cords are manufactured under the able guidance of our professionals ensuring the best quality product. This rubber is available in various specifications based on the demand of the clients. To ensure product efficiency, we check our products on various parameters. We undertake bulk orders with an assurance of safe and prompt delivery at reasonable prices.

Rubber cords are in demand for exacting commercial and industrial applications. No longer are Viton Rubber Cords used only in applications where flexibility is needed. Today typical applications require rubber cord to perform well in applications with environments of extreme heat and cold, where resistance to oil, chemicals and abrasion is mandatory. Types of rubber used in making cords Nitrile Rubber (NBR) VITON Ethylene Propylene Diene Monomer (EPM, EPDM) Silicone Rubber Some common properties of rubber cords are as follows : Available in various Hardness (Durometer, Shore A: 20 to 80). Various colors are available. Natural or any color (translucent or opaque). Should avoid prolonged exposure. Low compression set requirements. Good resistance to oil. Good chemical resistance and resistance to alcohols and benzene. However not suitable for contact with acetone. Good ozone and weather resistant properties. Electrically conductive material. Low temperature grade suitable for use at -40 degree. Applications High temperature sealing applications. Can be joined to o-rings. Food and medical equipment, machinery, transportation.

Silicone tubing will normally give the highest dispensing accuracy. Pharmed tubing will be the best choice where silicone is not chemically compatible. or long tube life is required. Silicone tubing should be selected where USP Class VI certification is required.   BEGIN BY SELECTING THE RIGHT TUBING SILICONE Most commonly used for dispensing applications silicone tubing meets USP and NFS Class VI standards. Translucent, Food and medical quality. Autoclavable.   NEOPRENE Until the introduction of Pharmed, the standard industrial tubing and generally best for abrasive slurries and for pumping against sustained pressure. Black, Food quality.   PHARMED Saint Gobain's exclusive thermoplastic elastomer which has superseded Neoprene, Butyl and silicone in many applications.Greatly enhanced tube life. Pharmed meets USDA standards for food handling and complies with FDA 21 CFR 177.260.Excellent chemical compatibility. Beige, Autoclavable.   VITON Flowtech Viton has greatly extended life (five to twenty-five times longer than previously available). Viton is expensive, but sometimes the only chemically suitable material. Black. Not food quality

• Brand Name: Ranelast
• Instrument classification: Class III
• Place of Origin: Maharashtra, India

• Color: Red, Green, White, Black, Blue.
• Shape: Round
• Material: Natural Rubber
• Size: 30 mm
• Thickness: 1 mm
• Brand: Ranelast
• Is It Stretchable: Non Stretchable
• Usage/Application: Door Gasket
• Hardness: 20 to 70 Shore A
• Diameter: 1 mm Dia to 30 mm Dia & above
• Tolerance: +/- 0.2 mm

• Size: 1 Inch
• Color: White
• Material: Silicone
• Brand Name: Bhumi
• Hardness: 50 Shore A
• Country of Origin: Made in India
• Packaging Type: Packet
• Tube Length: 6 m
• Max Temperature: -116 deg C to + 315 deg C

• Material: Silicon Carbide
• Length: 4000 mm
• Features: Splendid design, Smooth surface, Excellent strength, Competitive price, High sturdiness
• Diameter: 50 mm
• Temperature: Up to 1600 Degree C
• Packaging Type: Packet

• Brand Name: RD Promos

We manufacture a range of products in silicone tube band.these include cake moulds, biscuit moulds, ice moulds, chocolate moulds, general baking moulds along with promotional wristbands, key chains and other silicone products.one of our recent innovation is the silicone tube band a great packaging alternative for selling hand sanitizers, sun creams and other fast moving otc creams & lotions.the tube is flexible and can be wrapped around the wrist comfortably. The tube holds the liquid & is anti spill & leak proof. It allows the user to squeeze out the amount of liquid he want and than re-wrap it round his wrist.a great utility for hand sanitizer, sunscreen lotion, anti mosquito lotions for kids, marketing companies in india and abroad.its small can fit easily in the palm of your hand & on your wrist is anti leak and spill and extremely light weight.

• Feature: Good Quality
• Hardness: 0-60 Shore
• Material: Silicone Rubber
• Color: Orange
• Diameter: 2-100 mm
• Shape: Round

• Color: Milky White, Black
• Size: As per requirement

Key Features: a. Complies with FDA 21 CFR 177.2600 b. Antistatic properties to dissipate charges through rubber surface volume c. Used for flammable solvent transfer peristaltic pump application d. Non-transparent color (milky white or black) e. Available in 60 Shore A 70 Shore A hardness or as per requirement NOTE: Price vary as per ID OD of TUBE. Kindly email or call us for best available rate.

• SILICON TUBES/BRAIDED HOSE: TRANSPERENT,RED ANYOTHER COLOUR

Silicon tubes mostly used in pharma engineering sector for passing liquid medicines. Medical grade tubing pharmaceutical and biotechnology tubing

• Type: nitrile
• Color: Black
• Country of Origin: India

nitrile rubber sheet

• Features: Perfect tensile strength, Extreme temperature resistant, Resistant to pressure, Rigid construction, High strength, Seamless finish

• Color: Black, Red

Buy the best quality Nitrile Rubber Sheets that is the perfect outcome of the best practices and the innovative techniques. Our warehouse is installed with advanced machines and all required amenities ensuring safe storage of diverse kinds of products requiring different storage temperatures and conditions. Features Dimensionally accurate High tensile strength High durability

Extruded rubber profiles are available in the following profiles. If you cannot see the exact section you require, please contact us. Bespoke rubber piping extrusions can be manufactured to suit your application. Please quote your product code upon enquiry.

We are offering Silicone Rubber Tube, Cord, Gaskets, Profile, Viton Tube, Viton Gaskets, FBD Inflatable Gasket, Silicone O Ring, Silicone Sponge Gasket, Silicone Sponge Strips etc etc. Our Silicone Rubber Cords are round cross-sectioned extrusions which are generally used for gasketing and often joined end-to-end to make O Rings.We offer specially made rubber cords for: High Heat Resistance: Usable up to 250 Degree Celsius Oil / Fuel / Acid Resistance: For use in extreme conditions Excellent Weather / UV resistance: For long product life Fire Resistance: Self Extinguishing Cords for Fire Safety/Low Flammability Food Grade Applications: FDA/BgVV/USP Class VI/WRAS Compliant Manufacturing Process: We manufacture Silicone Rubber Cord in our state-of-the-art Cold Feed Extruders and Continuous Vulcanization Extrusion Lines. The entire setup is fully automated and computer controlled, which enables us to deliver: Very Accurate Dimensions: Computerized controls of the machine enable us to offer our customer excellent dimensional accuracy in the material Uniform Vulcanization / Curing of the Material:Since Vulcanization / Curing is being done as a continuous process rather than in a batch process, the material quality is better and more consistent. Excellent Surface Finish: We offer excellent surface finish in the Cord. Bend-less Extrusions: Due to the continuous curing process, the material is absolutely straight, without any bend, twist in the Cord. This increases ease of fitment. Features: Easy to use Crack resistance Attractive design Easy to install Various shapes Multi size

• colour: Transparent
• ID: 0.3 mm to 250 mm

We are offering silicone transparent tubing ami's medical grade silicone transparent tubings are manufactured under stringent quality control and having the following distinguished features:- made form medical grade silicone rubber which complied with usp class vi requirement & fda 21 cfr 177.2600 temperature resistant from -80°c to 250°c (-110°f to 480°f) non reactive to body tissue and fluid non-adherence to tissue. Unaffected by most waster soluble materials sterilisable by steam, dry heat, ethylene oxide (et) and gamma radiation resists oxidation, ozone and radiation. Indefinite shelf life does not support bacterial