Rudra Impex Corporation Kalbadevi, Mumbai, Maharashtra

we are   distributor for  wika, danfoss, switzer , phoenix contact , leuze , flexicon , we provide you total solution , please contact us at following address

Type : RT , IPS , QUINT

Brand Name : WAIKA, DANFOSS, SWITZER

Color : BLUE

Max. Current : 10A

Max. Voltage : 230

Mounting Options : PCB Terminal Block, Panel Mount

Current Rating : 10 amp

Material : Iron

The transmission of analog signals in industrial environments is very susceptible to interface. The MCR modular converters for measuring and control technology avoid the distortion of analog signals caused by external interference. With accurate conversion, electrical isolation and adaptation of analog signals, they provide safe and increased transmission quality and thus quality of control circuits. Full Product Range: Configurable signal isolators Dedicated signal isolators Repeater Converter Signal duplicator 1 and 2- channel passive loop powered isolators. PT100 Transducers to Voltage/ Current Thermocouple transducers( type J & type K) to Voltage/ Current Limit value switch Frequency to Voltage/Current Converter Voltage/ Current to Relay Output Converter RS 232 , RS 485 Repeater RS 232 to RS 485, RS 422Converter RS 232, RS 422 to Fiber Optic Converter PROFIBUS, DeviceNet, CAN open, MODBUS to Fiber Optic Converter TRANSDUCER / CONNVERTORS Advantages of Phoenix contact Converter Very compact Size Screw and spring cage version Power bridging via System Bridge. 3-way isolation amplifiers Universally configurable versions Power dissipation < 400 mW per channel Continuous 4-way isolation with 1.5kV test voltage High quality signal transmission with transmission error below 0.2% Power Supply possible via foot element

The more varied the tasks in electro technology, the more varied the components for the solution must be. The industrial connection technology from Phoenix Contact hence contains more than just modular terminal blocks. Circuits Breakers: For the optimum protection of your systems, Phoenix Contact offers high-quality circuit breakers in the following versions: Thermal Circuit breakers TCP they are ideally suited as device protection for the AC & DC consumers, e.g. to protect motors, transformers and actuators against overloads. Thermo magnetic circuit breakers TMC they combine the advantages of the thermal and the magnetic trigger mechanisms and are typically used in information and communication technology as well as process control. Electronic Circuit breakers ECP they are designed specifically for the selective protection of all load circuits that are fed by a 24VDC power supply unit. They respond to overload or short circuit faster than the power supply unit, and they selectively disconnect this faulty load circuit before the power supply unit disconnects all connected loads to protect itself.

The range of temperature switches includes components for general industrial use as well as specialised switches for demanding applications.

We are the manufacturers and supplier of this products.

Material : ss

Enclosure Rating Ip : 15A

Media Type : New

The Danfoss range of temperature sensors is based on decades of global experience within the marine industry and in refrigeration plants - undoubtedly some of the toughest environments around. Even in these demanding surroundings you can trust our products; they have a long life thanks to their robust design.

Phase : Single Phase

Number of Poles : 2.0, 4.0

Brand Name : TRABTECH

Subcon Profibus Features & Advantages : Irrespective of whether the application requires 9, 15 or 25 position Connector with one or two cable infields for point to point or RS485 bus Connections. The Eight Variant for every application is available. Optimized design for PROFIBUS, CAN OPEN, MODBUS, RS232, RS422, RS485 & Safety Bus with the eight cable & tools complete the comprehensive range. An Idea has taken hold absolutely no soldering or Crimping tools. The Sub-D Connectors, Subcon can be connected fast & conveniently in field Condition. The Profibus Connector is designed for applications with a speed of upto 12mbps. Angled or Axial cable entry. With or without programming interface. Terminating Resistor is already integrated. Profibus Repeater upto 12mbps

Various variety of Stripping Pliers Stripping Tools for Conductors & Cables Wire Stripping Range : 0 to 11mm Diameter

Condition : New

Color : standard

Danfoss solenoid valve bodies and electrical coils are normally supplied separately and then combined. They are assembled quickly and simply without tools, providing optimum product flexibility and availibility. If a coil does need to be replaced, it can be done without stopping or draining any system. The solenoid valves are also available as assembled units if required.

The screw connection system is known and accepted worldwide as the most frequently used type of wire termination. Due to highest contact forces, top reliability is attained regardless of the conductor cross section from 0.14 to 240Sqmm.

Relays are being used as the interface between the two circuits at same or different potential to archive: Electrical Isolation between the controller and the load side. For Signal Multification For Signal amplification And to interface different potential Relays From 1Channel /2/4/8/16 nos. on one board Relays with 1/2/4 Changeover With/ Without fuse protection with / without fuse blown indication Relays with Socket or Directly soldered on PCB Available Coil Voltage is 24V, 230VAC/110VAC

Danfoss coils are specially designed to operate in the aggressive environment with high humidity and temperature fluctuations found in most refrigeration systems. The clip-on fastening system ensures a faultless installation and makes the coils easy to mount or dismount. Clip-on coils are mounted without any tools at all, and it is simple to dismount the coil be means of a screwdriver. Clip-on coils are available for the entire range of Danfoss solenoid valves for refrigeration, freezing and air conditioning applications.

PHOENIX CONTACT PCB connectors have always fulfilled the high quality requirement of industrial electronics. As a world leader in the field of PCB connectors having more than 13000 different products, PHOENIX CONTACT offers solution to all types of your PCB termination requirements. When it comes to designing your printed circuit board connection so that it is cost-effective, Service-friendly, and neatly arranged, the print terminals and the COMBICON range from PHOENIX CONTACT are the ideal choice. It consists of male female pluggable PCB connector. This range offers convenient and error free wiring solution. With two to twenty four pole options it offers a convenient tool to design PCB with as many numbers of terminations as required by customer. The polarity protection prevents wrong making of male & female Connectors. The range is classified on the basis of :- 1] The pitch, Varying from 2.54mm to 15mm 2] The wire size, ranging from 0.14 Sqmm to 16 Sqmm 3] Termination principle of Screw, Spring & Crimp 4] Various conductor entry direction i.e. Vertical, Horizontal and Angled 5] Ampere rating 125A 6] In direction parallel to the conductor Axis 7] In direction vertical to the PCB. Connection point facing the rippled side of the header. 8] With side panels plug in direction parallel to PCB.

Danfoss pressure transmitters help you keep demanding industrial processes under control. Accurate, robust and built for long life, they perform reliably day after day, even in the harshest environments.

The range of pressure switches includes components for general industrial use as well as specialised switches for demanding applications.

Brand Name : phoenix

Condition : New

Danfoss oil nozzle programme consists of a wide range for standard burner systems as well as a series of special nozzles adapted for different market demands as regards operating area, media and emission. We produce nozzles in accordance with EN 293 and EN 299. Each nozzle is tested 100 per cent electronically and visually for function and uniformity. Danfoss recommends to change the nozzle once a year out of consideration for environment and operating performance.

The inline controller family is a modern, highly modular compact control system from Phoenix Contact Germany. It is designed for small to medium-sized applications. Their open interfaces mean that they can be integrated in almost any network. The direct expandability using the Inline installation system allows the controllers to be adapted very flexibly to many application tasks. In addition, an INTERBUS remote bus can be configured as a bus branch in order to incorporate distributed sensors and actuators.The ILC 150…..and ILC 200…controllers cover the lower performance range. ILC 3xx… expands the application range of inline controllers to medium – sized applications. The integrated interface and the powerful processors together enable easy data communication. With the ILC 3xx…., the Ethernet interface serves as a connection to other controllers or systems. The IEC 61131-5 communication modules allow data to be exchanged between controllers. The TCP/IP communication blocks can exchange data with any TCP/IP- compatible devices and systems.The inline controllers are configured and programmed from start to finish using PC WorX in accordance with IEC 61131. The application programs are downloaded and tested either via Ethernet, INTERBUS or the local RS – 232 programming interface, depending on the type of device. Programme Logic Controller Features & Advantages. Interface: - Ethernet (10/100), Inline, PRG (Mini DIN). RUN/STOP/RESET Switch (no. key – operated switch). Processing speed 1.5ms/1k instructions. Program memory approx 256k Byte. Data memory approx 256k Byte. 4096 I/O Handling capability. Retentive data memory 8k Byte. Internal parameterization memory with file Systems. Real time lock (Buffered) Base on Net technology. Programmable with PC WORX. Built in web server. Built in FTP server. Seperate power supply for logic, sensor & Actuator Colour coding for easy Connections. Remote handling capability. Built in diagnostics LEDS. Compact in size labeling & mark

A wide range of automation equipment is used for control processes. Whether it is the startup of a small system with just a few I/O signals or a complex power station, both applications share a common requirement- the signals from the automation equipment must be connected to the field level as per the industry standards. INTERFACE cabling offers two wiring techniques: the VARIOFACE system cabling and the VARIOFACE wiring interfaces. The VARIOFACE system cabling is a cabling concept that was developed especially to connect to various automation equipment. The system cabling comprises three harmonized components: FRONT ADAPTER SYSTEM CABLE CONTROLLER BOARD Interface Cabling Features & Advantages : The System concept of varioface system cabling reduces manufacturing costs through fast, faultless and uniform wiring of the input and output signals of a PLC. Varioface Systems cabling is available for controllers from: ABB Allen BradleyEMERSON Honeywell GE FANUC Mitsubishi Electric OMRON Schneider Electric Siemens Yokogawa  Simple planning using the project planning cross-list Cost reduction through time-saving wiring Fault minimization through protection against polarity reversal Easy maintenance through modular system components. Front adapters with an integrated pin strip (IEC 60603-13) are plugged onto the PLC I/O cards. They replace connection methods such as screw or crimp connection.