Safety Suits Dealers in Mulund, Mumbai

These Fire Entry suits can be used in preparation for possible fire eruption or for stand-by operations should a rescue or evasive action require passage through a fire zone. The Series 2K can withstand temperatures to 1093oC (2000oF) against heat and fire while Series A3K, having Aluminized outer shell can withstand high radiant heat to 1650oC (3000oF).

ALUMINISED FIRE PROXIMITY SUIT Manufacturers, Suppliers & Exporters Alugen® Aluminised Fire Proximity Suits are manufactured in compliance to meet stringent ISO 9001 standards. The fabric used to produce Alugen® suits are from GENTEX's proprietary Dual Mirror® / Flexir®Aluminized Fabrics, Imported from USA, which reflects 95% of heat and ensures superior protection and performance in the extreme work environments faced by civilians, emergency service, homeland defense and military personnel. Alugen® Aluminised Fire Proximity Suits offer an efficient solution to working in high-temperatures with superior durability.The most critical part about the Aluminised Fire Proximity Suit is the intactness of Aluminium on the outer layer of the suit as it reflects 95% heat, thereby allowing the wearer to remain much longer in proximity to heat & fire. The durability of Aluminisation on fabric can be confirmed by conducting a test named “Wet Flex” test. The procedure goes as follows,  The fabric is dipped in 60°C hot water for 15 mins and then 1000 machine abrasion cycles are conducted. There should be no delamination, or peeling off on any part of the fabric. All 'Alugen' Suits are made from fabrics which pass Wet Flex test. Most of the fabrics available in market do not pass this critical test. As a user one should be careful about this. GENTEX's proprietary Dual Mirror® / Flexir® Aluminized Fabrics offers an exceptionally high level of abrasion resistance - the result of its unique, five-layer fabric structure. This proven system ensures that the suit remains highly reflective even after repeated use and proper care and cleaning.   The five layers consist of an outer skin of 1. Aluminum, 2. Protective film, 3. Second layer of Aluminum, 4. Heat-stable adhesive and 5. Base fabric. These individual layers are then combined to form a single fabric. The five layers consist of an outer skin of aluminum, a protective film, a second layer of aluminum, heat-stable adhesive and a base fabric. These individual layers are then combined to form a single fabric (As below).  

Nitrile sole safety shoes- ideal for high temperature application(upto 300 deg), chemical exposure, metal filings exposure.

• Brand: Alugen
• Number Of Layers: 4
• Sleeve Type: Full Sleeves
• Gender: Unisex
• Weight: 10 +/- 0.5 Kg
• Available Sizes: S, M, L, XL, XXL, XXXL, As per customer requirement

• Size: Medium, Large, XL, XXL, Small
• Thickness: 0.43-2 mm
• Color: Orange
• Material: P/V Fabric,P/C Fabric,C/P Fabric
• Pattern: Plain
• Width: 1000 - 1500 mm
• Fabric weight: 220 to 300 Gsm
• Heat Resistant: 650 degree C
• Sleeves Type: Full Sleeves
• Wear Type: Not Reflective
• Closing type: Zipper

AramidKevlar non woven laminated with PTFE membrane for maximum breathability and hydrostatic head (waterproof) performance. (EN 343 protection against foul weather)Constructed using non-woven ARAMIDE KEVLAR fibers laminated with NomexViscose innermost ling fabric for maximum protection.

Series NA2K & Series A3K developed and manufactured by Modern Apparels are engineered to the highest levels of protection to the Firefighters & Rescuers against extreme temperatures. These Fire Entry suits can be used in preparation for possible fire eruption or for stand-by operations should a rescue or evasive action require passage through a fire zone. The Series 2K can withstand temperatures to 1093oC (2000oF) against heat and fire while Series A3K, having Aluminized outer shell can withstand high radiant heat to 1650oC (3000oF).  Applications : Fire Entry Suit are used in various industries like Petroleum, Oil & Gas, Electricity Generation, Steel, Defence, Petrochemicals & Refining and all places where there is hazard of fire eruption and extreme heat generation.  Specification:-Suit made of multiple layers for maximum heat protection. Breathing apparatus required. Suit consist of :- HOOD: Designed to be used with air mask. Inner drape flame seals. Underarm adjustment straps. Built in shell for structural support. Hard cap with ratchet headgear. Speedy clip for hard cap support. Hardened aluminum window frame with 2 tempered glass lenses plus 2 gold plated Lenses for thermal protection. COAT: Designed to be worn with breathing apparatus. Double storm fly Front : Flame seal with drawstring at coat bottom. PANT: High waist design. 2 inch wide adjustable suspenders. Adjustable Straps on leg bottoms. BOOTS: Designed to fit over work shoes. Rear entry with overlap snap closure and adjustable take-up straps. Insulated wire reinforced sole of flame resistant neoprene fiberglass riveted to boot cover. MITTS: Heavy weight construction made with Aluminised fabric.WEIGHT: weight of complete suit will be approximately 25 kgs. CERTIFICATIONS : Made Out Of Fabric Which Are Tested & Passed EN ISO 11612.

• Material: Cotton
• Size: Medium, Large, Small
• Gender: Men
• Weight: 350 - 1600 GSM
• Sleeves Type: Full Sleeves
• Pattern: Plain
• Thickness: 1-3 mm
• No of Layer: 4
• Heat Resistant: 800-1000 degree C
• Closing type: Zipper
•  :  
•  :  
•  :  
•  :  

In any industry a fire fighter has to work under conditions of very high temperature especially in case of aircraft fires, chemical fires etc. We supply alluminised fire proximity suits which exactly suit all the requirements in the above circumstances. These alluminised fire suits are made up of kevelar fabric. These suits are also useful in petrochemical plants.

• Technics: Machine Made
• Size: M, L, XL
• Feature: Waterproof
• Gender: Male
• Wash Care: Machine Wash
• Sleeves Type: Full Sleeves

Fire entry suit is specially designed for complete protection from fire. Fire entry suits are generally made up 8 layers of insulation In this case boots, soles and hoods are also completely insulated. We manufacture fire entry suits strictly adhering the standards of ISO 9001. Here fire fighter while performing his duty may come in contact with fires where temperature can be more than 2000 ° F. sometimes. Our fire fighting suits are manufactured taking into consideration all these aspects and we can confidently say that they are able to protect fully the user from heat up to 3000 ° F

• Color: Yellow
• Size: All sizes
• Type: Fireman Hoods
• Features: Superior finish, Perfect fitting
• Leak-Proof: Yes
• I Deal in: New Only
• Features: Superior finish, Perfect fitting, Attractive design

• Brand Name: French Terrain
• Sleeve Type: Full Sleeves
• Application: Industrial
• Pattern: Plain
• Country of Origin: Made in India
• Fabric: Cotton
• Usage/Application: Oil and Petroleum Industry

• Material: Nomex
• Size: Large
• Color: Blue
• Gender: Unisex
• Country of Origin: Made in India
• Brand: Milan Safety
• Usage/Application: Fire Safety
• Model Name/Number: FFS01
• Wear Type: Reflective
• Number Of Layers: 3 layers
• Sleeves Type: Full sleeves
• Wash Care: Machine wash
• I Deal In: New Only 
• Heat Resistance: Yes
• Product Type: Jackets & Coats

With valuable industry experience, we have emerged as one of the prominent manufacturers and exporters of Safety Boiler Suit. All these Industrial Boiler Suit are widely demanded in the industries of oil & gas industries. Specially designed for the safety of workers working in highly critical processing areas, these Safety Boiler Coverall can excellently sustain high temperature and other adverse conditions in the industry. Our clients can get this Safety Boiler Suit from us in different colors and sizes as per their requirements. Features

Fire proximity suit is made out of 16 oz imported aluminized glass fibre fabric with dual mirror having 90% reflection of heat as a outer layer and with woollen fabric lining. Additional layer (Vapour Barrier) is also used for higher temperature.

• Type: Fire Retardant Coverall
• Material: Non Woven, PE, PP, PVC
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm, 3.5-4mm, 4.5-5mm
• Application: Constructional Use, Industrial
• Type: Body Suit
• Color: Black, Blue, Green, Grey, Orange, Red, White, Yellow
• Pattern: Plain
• Feature: Anti Wrinkle, Anti-Shrink, Comfortable, Heat Resistant, Skin Friendly, Waterproof
• Neck Type: Collar, Round
• Sleeve Type: Full Sleeve

We offer high performance Kevlar Fire Suits that is widely applicable in intense heat, fire, steam and hot liquid. These Kevlar Fire Suit are extensively used in the petrochemical plants, foundries, plant, steel, glass, ceramics and defence industry. The Kevlar Fire Suit has been specially developed and field tested for rescue operations.

• Size: L, M, S, XL
• Type: Safety Boiler Suit
• Material: Non Woven, PE, PP, PVC
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm, 3.5-4mm
• Application: Constructional Use, Industrial
• Type: Body Suit
• Color: Black, Blue, Green, Grey, Orange, Red, White, Yellow
• Gender: Female, Male
• Feature: Anti Wrinkle, Anti-Shrink, Comfortable, Disposable, Heat Resistant, Skin Friendly, Waterproof
• Pattern: Plain
• Neck Type: Collar, Round
• Sleeve Type: Full Sleeve