Sambhav Pipes & Fittings Bhuleshwar, Mumbai, Maharashtra

weldox is Structural Steel plate from SSAB Sweden. Weldox 700 is a general structural steel with a minimum yield strength of 700 MPa. Weldox 700 meets the requirements for the corresponding steel grades and qualities according to EN 10025.Applications Load carrying structures having high demands on low weight.Weldox 700D with guaranteed impact toughness at -20º C (-4ºF). Corresponds to S690QWeldox 700E with guaranteed impact toughness at -40º C (-40ºF). Corresponds to S690QLWeldox 700F with guaranteed impact toughness at -60º C (-76ºF). Corresponds to S690QL1Size: 05mm~ 30mm x 1500mm ~12000mm.  

We are a leading name, which is engaged in offering a comprehensive range of Stainless Steel Rods, Bars & Wire. The offered range is manufactured utilizing superior grade raw material such as stainless steel and allied, procured from reliable vendors of the market. In addition to this, the offered range is tested on different parameters to ensure its tandem with the highest quality norms and standards. Grades : Stainless Steel 202, 303, 304, 304L, 309, 310, 316, 316L, 316TI, 317,317L, 321, 410, 416, 420, 430, 440C, 904LDiameter :  6.0-400 mmStandards : GB, JIS, DIN, ASTM

We are able to offer a wide gamut of Manganese Steel. These products are featured with fully austenitic, quench annealed, non-magnetic, work-hardening steel with an exceptionally high level of wear resistance when subjected to work-hardening by shock or high impact pressure in service. This, when combined with the level of carbon in accordance with the international standards, leads To increase hardness from 200BHN (in as delivered plate) up to an in-service hardness of at least 600BHN. This work-hardening capability renews itself throughout in-service life. The under-layers not work-hardened maintain an excellent resistance to shock and a very high ductility

Our firm is instrumental in offering a wide assortment of Manganese Cut Plates to the clients. Due to their features such as longer service life, sturdy construction and high tensile strength, these products are highly demanded in the market. These products are used mostly by earth moving andexcavation companies because of the strength of the materials. Applications: • Wheelabrator Parts• Grizzly Bars, Chute Liners• Hoppers• Truck Bed Bodies• Scrapers• Conveyor Parts• Baffle Plates• Logging Skids• Bucket Liners• Wear Screens• Shovel Components• Bark Hammers• Kickout Arms• Blades• Liner Plates• Mine Cars & Equipment• Log Decks• Cyclones• Debarking Drum Components• Chip Silo Components and Hammers

With thorough industrial knowledge, we are engaged in manufacturing and supplying of a wide range of Industrial Structural Steel. The offered assortment is sourced from reliable vendors, who follow industry set guidelines in themanufacturing process. Before the final dispatch, all the offered products are stringently examined by a team of quality analyzers on various stages. Further our range of this products are available at very reasonable prices.  

In accordance with the technical evolution, structures or pressure vessels are becoming bigger, and more highly pressurized recently. To maintain the safety of those structures, consequently, customers have required high strength steel plates with good weldability and high toughness. To meet the rapidly growing customer requirements, JFE Steel has developed wide range of high tensile strength steel plates such as 590~980N/mm2 class, with their own special characteristics. These are called JFE-HITEN, and JFE Steel wins a popularity in the world High Strength -- JFE-HITEN is low-alloyed high-strength steel plate manufactured by TMCP, or quenched and tempered. Because JFE-HITEN offer high strength, it results in a significant reduction in the weight of welded structures.

We have been able to offer an extensive range of High Manganese Steel Plate. These products are features with fully austenitic, quench annealed, non-magnetic and work-hardening steel with an exceptionally high level of wear resistance when subjected to work. The offered range are hardening by shock or high impact pressure in service.

Domex 700 MC IS Hot rolled, extra high strength, cold forming steel from SSAB Sweden. Domex cold forming steels are thermo-mechanically rolled in modern plants where the heating, rolling and cooling processes are carefully controlled. The chemical analysis, consisting of low levels of carbon and manganese has precise addition of grain refiners such as niobium, titanium or vanadium. This together with a clean structure, makes Domex Steels the most competitive alternative for cold formed and welded products. Domex 700 MC with designation D and E meet and exceed the demands for steel S700MC in EN-10149-2.APPLICATIONThe extra high strength steel grades are used in applications such as truck chassis, cranes and earthmoving machines. In these applications, the high strength of the steels is used to save weight and/or to increase the payload. As a result of this and the good formability of the steels, the total costs can be reduced.Size: 05mm~ 30mm x 1500mm ~12000mm

Material : Corten Steel

These Carbon Steel Seamless Pipes are widely acclaimed for their features of high tensile strength, smooth internal finish and hardness. These Carbon Steel Seamless Pipes are developed for energy-related applications involving oil and gas drilling. Further, our range of Carbon Steel Seamless Pipes can be availed in different material and dimensional specifications. Used In   Marine applications Nuclear power and fossil fuel power plants Transportation Petroleum plants Construction Industry Available In Grades ASTM A 106 GR. B ASTM A 53 GR. B API 5L GR. B IS 1978 YST 210 IS 1978 YST 240 DIN 17175 ST 35.8 DIN 17175 ST 45.8 DIN 17175 ST 52.0 Specifications Size/Range : 6mm to 200mm Thickness : 0.5 mm to 12 mm Length : Random Length 4 to 7 MTR. Standard Fixed Length : up 28 MTR Conditions : Hot Finish/ Cold Finish, Heat Treated & Stress Relived, Bright Annealing Standards : ASTM A53, A106, A179, A192, A213, A210, A335G, P1, P5, P9, P11, P22, P91 Radius : 1.5 D to 2 MTR. DU Bend Grades : Carbon Steel / Alloy Steel

Thickness : 0.5 mm to 12 mm

Grade : ASTM A53, A106, A179, A192, A213, A210, A335G, P1, P5, P9, P11, P22, P91

Material : Stainless Steel

Thickness : 4-8 mm

Type : Plate

We are Specialist of Alloy Steel pipes which are available to our clients in various grades like Alloy steel200 (UNS No. N02200), Alloy steel 201 (UNS No. N02201) and Alloy steel205 (UNS N02205). These are available in standard as well as customized lengths, thickness, sizes and dimensions as per the requirements of our clients.   Specifications :- Grades : Gr P 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91ange : ½” NB TO 24” NB IN SCH 20 , 30, STD, 40 , 60 , 80 , XS , 100 , 120 , 140 , 160 & XXS as Per NACE MR 01 75 Type : SEAMLESS / FABRICATED Length : Single Random, Double Random & Cut Length End: Plain End, Bevelled End, ThreadedAlloy Steel Pipe Standard:  ASTM / ASME A 335 Grade: Gr P 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91