Scientific Instruments Dealers in Borivali, Mumbai

Sci-tech three phase panel voltmeter with built-in 6 position selector switch model vss72 & 96 are used for measurement of voltage between phase to phase and phase to neutral.

The oscillating Disc type Rheometer is an efficient, simple and reliable testing equipment. It is quite easy to operate. The Rheometer describes precisely and quickly curing and processing characteristics of vulcanizable rubber compounds. It works on a very simple principle. A test piece of rubber compound is contained in a sealed test cavity under positive pressure and maintained at a specified elevated temperature. A Rotor ( biconical disc )is embedded in the test piece and is oscillated through a small specified rotary amplitude. This action exerts a shear strain on the test piece and the torque (force) required to oscillate the disc depends upon Stiffness (shear modulus) of the rubber compound.The stiffness of the specimen compound increases when cross links are formed during cure. The direct Proportionately posited between the shear modulus and the cross linking density is based on the statistical theory of rubber elasticity .At a constant temperature of the test, a cross linking isotherm is the function of time of that property which serves to measure the course of the cross linking reaction. In the context of Rheometer, the cross linking isotherm is thus the function of time, of the oscillating shear force F, or of the Rheometer indication proportional to it, occurring at a given temperature as a result of vulcanization. A plot of this torque (force) value against time gives a typical graph called "Cure Curve or Rheograph". A trained eye can monitor the initial trough i.e. processing behavior of the compound, the slope of rise during cure phase i.e. curing characteristics and final shape of the curve. Internationally designated parameters like MI, MH, TS2, TS5, TC50, TC90 etc. are markers which can be used to describe a graph. The Cure Curve obtained with Rheometer is a finger print of compound's vulcanization & processing character. ApplicationIn order to produce consistent quality of rubber product, it is of vital importance that compounded rubber is of consistent quality. The process of mixing is subject to variations due to Ingredients variations Machinery variation Man variation Batch to batch variation as the compound is mixed in batches. To minimize the effect of above four variables one has to design technique to overcome it. If randomly selected batches are subjected to Rheometeric analysis, one could in a large sample size, workout upper and lower control limits, range, mean and standard deviation, with reference to Rheological parameters. Each batch on testing can be classified in Pass/Fail criteria depending upon the quality control limits. Based on this, the internationally acceptable control called "Statistical Quality Control" (SQC) can be designed. One can also design quality control gates which can be marked on the screen so that a quick decision can be made regarding acceptability or rejection . Rheometer is a versatile instrument and of numerous applications . A compounder can use it to his advantage in areas like development of new compound, rationalization of existing compound both in terms of quality and economics, optimization of curing process in the manufacturing process to get a better yield. It is up to the user to design his own techniques with the help of this excellent tool to suit his process.

• Type: Calipers
• Color: Green, Grey, Light Green, Multicolor, White
• Condition: New, Used
• Application: Measuring Use
• Display Type: Analogue, Digital
• Driven Type: Battery
• Feature: Accuracy, Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish, Water Proof

• Type: Voltage Regulators
• Material: Aluminium, Plastic
• Application: Voltage Flow
• Color: Golden, Green, Light Green, Metallic, Silver
• Condition: New, Old
• Operating Temperature: -25 +85deg C
• Automatic Grade: Semi Automatic
• Feature: Accurate Reading, High Performance, Longer Service Life, Rust Proof
• Current Type: AC, DC
• Regulator Type: Linear Regulator
• Output Type: Variable

• Country of Origin: Made in India
• Temperature Range: Ambient to 400 Deg. Accuracy - +/- 0.5 Deg. C Precision 0.1 Deg C.
• Weight measurement accuracy: 1 mg, 0.1 mg, 0.01 mg
• Model Name/Number: DSC 1
• Brand: SMS Technologies
• Material: Mild Steel

• Material: Stainless Steel, Plastic
• Measuring Range (Inches): 0.0005
• Pack Type: Box
• Accuracy (millimetre): 0.01mm
• Depth (millimetre): 150mm
• Usage/Application: Industrial

Our collection of scientific instrument comprises laminar air flow, filter holder, environmental test chamber, cryostat baths/ recirculators, horizontal laminar air flow. We are supported by a team of talented and dedicated personnel, engineers, quality analysts, administrative staff, packaging personnel, R&D experts etc who work relentlessly to provide the best of quality products to you.   

• Type: Hygrometer
• Material: Glass
• Application: Lab Use
• Country of Origin: India

Hydrometer’s   Brand SimSil Material Borosilicate Glass Capacity 0.650- 1.000 g/ml Usage/Application Laboratory Color Transparent Country of Origin Made in India

• Country of Origin: India

3KVDC Pin hole Tester for Enamelled Winding Wire

• Type: Touch Screen
• Material: Glass
• Display Type: Touch Screen
• Brand Name: IKON INDUSTRIES
• Color: Blue and Grey
• Material: Stainless Steel
• Weight: 10 KG
• Certificate: Traceable to NABL
• Voltage: 220 V
• Model Name: IK/SRV/02

High Voltage Short Circuit Testing machine, wash maximizer Plate washing Tank

• Type: AC ,
• RANGE: 5 KV / 30 mA & 10 KV /30 mA
• DISPLAY: ANALOG METERS FOR KV & mA INDICATION
• TRIPPING: AUTOMATIC
• SAFETY: SAFETY PROBE
• ALARM: AUDIO & LAMP INDICATION

• Condition: New
• Automation Grade: Automatic
• Output Type: AC Single Phase
• Frequency: 50 Hz
• Warranty: 1year
• Country of Origin: India
• Phase: Single Phase

For OT fumigation 

• Brand Name: Mitutoyo
• Material: METAL
• Color: Sky Blue
• Condition: New
• Type: Digital Vernier Caliper

mitutoyo vernier caliper

Our company has carved a niche in the market by providing high quality Viscosity Bath in the market. We provide two options in Viscosity Bath, namely- Viscosity Bath (Heating) and Viscosity Bath (Cooling). Our Viscosity Bath is highly appreciated for its smooth heating and cooling processes. This means that our Viscosity Bath has got excellent heating and refrigeration functions. Viscosity Bath [Heating] Viscosity temperature bath designed for accurate convenient & economical determination of viscosity of oil etc durable corrosion free stainless steel inner & outer made from G.I / M.S duly epoxy powder coated finish controlled by solid state digital temperature controller specially designed pump cum stirring assembly for high accuracy & uniformity perfectly sealed glass window at both the sides for see thru the test which is carried out while keeping the unit ON Optional Accessories Illumination by Fluorescent tubes for clear visibility of test P.I.D Based Controller Microprocessor controller As per G.M.P P.O.R Viscosity Bath [Cooling] Same as above with Refrigeration system of Hermetically Sealed compressor of EMERSON make or better than that of which will be placed below the working chamber without disturbing any kind of mechanism. Optional Accessories Illumination by Fluorescent tubes for clear visibility of test P.I.D Based Controller Microprocessor controller As per G.M.P P.O.R

• pH Range: -2.000 to 20.000 pH
• Resolution & Accuracy: 0.1/0.01/0.001 pH & ±0.002 pH

Measures up to 10 parameters :: Up to four channels measured and displayed simultaneously: - Two channels of pHmVISE inputs - One channel for pH (FET) - One for Dissolved OxygenBODOURSOUR - One channel for ConductivityResistivityTDS Salinity input (2-cell or 4-cell) :: Advanced design ensures adequate shielding to prevent cross talk or other interference. :: Wide pH and mV measurement range: -2.000 to 20.000 pH and ± 2000.0 mV :: ‘DirectIndirect’, ‘Known AdditionSubtraction’ and ‘Analate AdditionSubtraction’ Ion measurement methods in ppm, %, mgmL and moleL. :: DO measurement includes five-day BOD testing, OUR, and SOUR. Simple DO measurement ranges from 0 to 60 mgL and 0 to 600% saturation. :: Single point and Multi-point standardization for Conductivity, Resistivity, TDS and Salinity measurements using two-cell and four-cell probes. Built-in replatinising circuit.

• Usage/Application: Laboratory
• Material: Plastic
• Shape: Rectangular
• Display Type: Digital

Economic and premium calipers available manual and digital form. Category: Tools Economic and premium calipers available manual and digital form.

Our Scientific Instruments consists of :- Balances & Weight Boxes - Scales & Calipers - Micrometer Screw Gauge - Spectrometers - Bucket & Cylinder - vernier microscopes- Electromagnet and Air pumps- Spectrum, discharge tubes - Model of Solar System - Bunsen Burners - Incubator,ovens,autoclaves- Muffle Furnace - Water Distillation Water Still - Centrifuges Hand Driven - Shaking Machine - Sieve ShakersOur Laboratory Instruments includes :- Hot Extraction (soxhlet) equipment- Tablet making machine- Conical percolators- Motor driven disintigerator- Table hardness tester- Tincture press- Collapisble Tube filling machine- Overhead projector- OHP Transperiencies & slide projector films.

• Country of Origin: Made in India
• Usage/Application: Laboratory
• Material: Stainless Steel
• Display Type: Dial
• Accuracy: 100-300 kg
• Brand: Texon

Libratherm Digital Voltage scanner model LVS-3, designed to monitor the incoming 3 phase AC supply voltage. It displays the AC voltage across 2 phases (like RY, YB & BR) sequentially at regular interval of time. LVS-3 also monitors one of the phase failures and phase reversal condition, under voltage and over voltage condition compared to the factory set values. The respective status is indicated on the front panel LEDs. In case of any of the abnormalities in the supply voltage a relay output is provided to indicate the false conditions. Under normal operation the relay will remain energized and under faulty condition the relay de-energizes. The relay contacts (rated for 5A @ 230VAC) can be used to trip the external load or contactor operating on 3-phase AC supply. LVS-3 is a useful instrument to protect the 3 phase loads like AC motors and it is widely used by the electrical panel builders. LVS-3 is rugged, reliable and field proven and is available in 14 DIN size of (96 x 96 x 120) mm. ApplicationProtection of 3 phase loads like motors, pumps, transformers etc… against failure and reversal of any one phaseSuitable to use on Electrical control panels

Single point and Multi-point standardization for Conductivity, Resistivity, TDS and Salinity measurements using two-cell and four-cell probes. Built-in replatinising circuit.Advanced real-time on-screen graphing function provides useful indication for specific measurements such as titration.Extensive setup screens enable you to customize meter to your needs, e.g. Isopotential Point, Temperature Units, Ion Method, ISE Electrode Type, BODOURSOUR Configuration, Cell Constant, Temperature Coefficient, TDS Factor, Alarm Limits and other functions. :: Windows® CE-driven, full-color touchscreen provides unmatched ease of use in operations and setups with user-friendly icons, user prompts and context specific ‘help’ screens. Advanced USB, IRDA connectivity allows extensive hostdevice communication capabilities.EthernetInternet-ready with RJ45 input for connection to LAN or Internet for quick online research and data sharing. Up to ten thousand data set storage per user login (currently one of the highest in the industry) password protected access and customization for up to ten users.

• Application: Industrial Use
• Weight: 0-100kg
• Color: Brown, Grey, Maroon, White
• Voltage: 220V
• Display Type: Analog, Digital
• Frequency: 50Hz-65Hz
• Material: Brass, Cast Iron, Copper, Stainless Steel
• Power Source: Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Yrs
• Automation Grade: Automatic, Fully Automatic

We are offering lab instruments. Citizen scale (i) pvt. Ltd. Is offering a wide range of lab instruments such as viscosity meter and more.

Libratherm offers digital large display industrial grade Hygro-thermometer to monitor in the surrounding environment the Temperature and Humidity values on redgreen display. Large display size allows long distance visibility and hence ideal for Industrial use and can be easily mounted at height on the wall. The integrated standard T +Rh sensor module is available with 2-meter cable and for long distance sensing very much away from the display unit, suitable Libratherm make T +Rh transmitter can be used. To generate audiovisual alarms on deviation of T and Rh values from the desired settable values the inbuilt indicating lamps with beeper are provided in model HTI-2000-A and HTI-4000-A.

We are offering herzog multi-range viscometer (hvm 472) determines direct kinematic viscosity of transparent and opaque liquids fully automated. The easy to operate hvm 472 includes 2 multi-range capillaries with 100 fold measuring range, requires only 18 ml, and delivers precise results. A revolutionary auto sampler offers truly continuous operation, spent sample vials automatically discharge, allowing new samples to be added at any time, even mid-test! for rapid analysis within viscosity range of 0.5 to 600mm2s, the hvm 472 offers the smart alternative to run samples using 20-fold range fast run (fr) capillaries. The hvm 472 shows excellent precision and accuracy in full compliance with astm d445.

• Material: Stainless Steel
• Type: Viscosity Meter
• Voltage: 220 V
• Power Source: AC
• Frequency: 50 Hz
• Country of Origin: Made in India
• Usage/Application: Laboratory
• Number Of Cups: 1
• Features: Automatic
• Weight: 6.2 Kg
• Phase: Single