Scientific Instruments Dealers in Goregaon, Mumbai

• Model Number: PE-11R_PE-11RC_PE-11R-T_PE-11RC-T
• Accuracy: 0.05%
• Country of Origin: Made in India
• Display Type: 4.5 digit display
• Range: 1 micro ohms to 200 kilo ohms
• Current: 1 A.DC
• Brand: Prestige Electronics
• Model: Micro Ohm meter
• Usage: Industrial
• Resolution: 1 micro ohms
• Test current: 1 A.DC
• Measurement technique: True 4-wire/ Kelvin measurement
• Temperature coefficient: 50 ppm
• Computer Interface: Yes, with PC software
• Memory storage: 2500 readings
• Temperature Sensor: Yes
• Temperature Corrected Readings: Yes ( @ 20 DegreeC)
• Resistivity / Conductivity Calculations: Yes ( ohm.meter / % IACS)

"Delta" H.V. Flash Tester are made heavy duty, keeping in mind long term reliability. Rating are 0 - 5 kV @ 100 mA. Trip current settings can be provided as 25 mA - 50 mA - 75 mA - 100 mA OR 10 mA - 25 mA - 50mA- 75 mA. As an option, a timer can be provided to test an object for a preset time. Most of the capacitors used in the lighting industry are hand made, esp. the metallization of electrodes . The qualitiy of these capacitors change from batch to batch." Delta" has developed a test panel with high discharge currents (up to 10 kA pulse) to test the capacitors samples cyclically for a specified duration. If during this test, any capacitor short-circuits; a lamp- inside the panel will light up. After the test capacitors have to be tested for their impedance by passing the current at rated voltage This is a destructive test; all the capacitors tested on this panel have to be destroyed afterwards & not to be used.

• INPUT:: 230/240 Volts 1 Ph 50 Hz AC
• OUTPUT:: 0-3 kV / 0 – 6 kv One Side Grounded.

3 Pin System of Live, Neutral And Earth. Ensure Proper Earthing at your end.,MCB,Zero Interlock Provided,Fast acting tripping Device

• Temperature: -5oC to 50oC
• Humidity: 0-98% Relative Humidity.

To determine the material thickness of all non-woven fabrics. With these instruments the most popular checking methods can be applied for textiles, felt, paper, floor coverings, leather, foils, rubber etc.

Requires No Desiccant, No Dehumidifier, No Purging, No Switching ON for 24 Hrs PATENTED DOUBLE PIVOT INTERFEROMETER WITH ZnSe BEAM SPLITTER design with LIFE TIME WARRANTY. Comes without Interferometer lock when shipped from factory. Highest Signal to Noise Ratio of 45,000: 1 (4 cm-1, 60 Sec, Peak Response). Ultimate Signal to Noise Ratio 2,50,000: 1 Extensive built-in health monitoring. Excellecent priceperformance ratio. SN ratio, stability, reproducibility, robust, reliable. Maintenance free, no consumables, lowest cost of ownership. No HeNe laser, >20 years average life. Patented Source, > 10 years average life.

• Display: TFT 240 x 320, 95k colours, with capacitive Touch screen
• Weight: approx. 205 g
• Display surface: Toughened glass, scratch-resistant, 7 degree of hardness
• Display resolution: 2 decimal places
• Interface: USB (cable and PC software
• Data storage: up to 200 gauges taking approx. 1 million values
• Power supply: 4 Alkaline LR6 AA (included), or via USB 5V; optional chargeable batteries NiMH 1,2...2,5 V
• Power consumption: approx. 400 mW (active)
• Battery life: approx. 1 year passive, mind. 24 h aktive
• Integrated sensor supply: 5.5 V ±10% DC, max. 200 mA
• Pressure measuring range: 800...1100 mbar absolute
• Pressure measuring accuracy: 0.5 mbar (at 25°C / 1013.25 mbar)
• Resolution: 0.024 mbar
• Measuring principle: piezoresistive
• Operating conditions: <90% r.h. (20 g/m³) non-condensing; max. 4000 m altitude above sea level
• Storage conditions: -20...+60°C ambient temperature; <90% r.h. non-condensing
• Dimensions: 170 x 62 x 34 mm
• Features: Online/Offline data recording , USB interface with cable , Simple operation via Touchscreen .

• INPUT:: 230/240 Volts 1 Ph 50 Hz AC
• OUTPUT:: 0-3 kV / 0 – 6 kv One Side Grounded.

3 Pin System of Live, Neutral And Earth. Ensure Proper Earthing at your end.,MCB,Zero Interlock Provided,Fast acting tripping Device

• Features: Durable
• Temperature Range: 5° above ambient to 150°c
• Accuracy: ± 1°c
• Resolution: 0.1°c
• Size: 12 x 9 x 12 inches.

A central venous manometer may be used to either continuously or intermittently measure central venous pressure. Graduated column where measurements are in centimetres of water. Graduations are marked from –4 cm to 34 cm and attached to three way stopcock. A 120 cm long extension tube is fitted with female luer lock on one end and male luer lock on the other end for safe connection to Central Venous Catheter. Moulded clamps are provided with latex rubber strings for proper fixation to the I.V. Stand. A Sliding indicator is provided to record reading of the fluid levels during measurement. CVP manometer mostly used in ICCUs, CCUs, surgical ICUs and surgery wards to monitor and control the hemodynamic state of patients by measurement of the Central Venous Pressure.   FEATURESBENEFITS Crystal clear rigid tube (or) Rigid scale with manometer tube Calibrated from (-)5 to (+)30cm water pressure for accurate pressure reading Reusable tie bands / Velcro straps For easy fixing to the I. V. stand 'Transparent & fully threaded end adaptors with 3WSC Ensures a safe and secure connection with trouble free venting Moulded clamps are provided with latex rubber strings For proper fixation to the I.V. Stand Sliding leveler To  record  fluid level readings during  CVP measurement Vented luer caps Permits aseptic handling and priming

Delivering excellence at a consistent level, we are a renowned Manufacturer, Supplier and Exporter of Laboratory Viscometer Bath. We make sure our product conforms to the highest standards of quality set by industry. Our priority is to equip it with immense quality, durability and robustness. We make it available as per exact demands of the customers. For our esteemed customers, we offer our perfect quality at economical rates. Features : Kinematic viscosity is of primary importance in the design and selection of a wide range of petroleum products. Calibrated capillary viscometers are used to measure flow under gravity or vacuum at precisely controlled temperatures. Rectangular model having double walled construction with toughened glass observation window Illumination from rear side provided. Oil immersion heater.

• Brand Name: Prestige Electronics
• Application: Industrial, Laboratory
• Model: PEI-24
• Multiple Test Voltages: 100V, 250V, 500V, 1000V
• Basic accuracy: 3%

It is used to determine absolute or dynamic viscosity of bitumen and cut-backs by vacuum capillary viscometers at any specified temperature. It is applicable for the materials having 42 to 200000 Poises. Supplied complete with manufacturers Test Certificate for Constant under Vacuum 30 cm Hg of Bulb B & Bulb C.

Double walled unit Outer GI powder coated Inner S.S. 304 Insulation provided to minimize heat loss S.S. lid on top with provision for holding Viscometers holders Hermetically Sealed CFC Free Emerson Compressor Temperature range: Above ambient to 99℃, -10℃ to 99 ℃ Application:  Equipment specially designed for tests in the field of medical Agricultural Bio-chemical R & D & Q. C. Laboratories

Golden Dial for measuring of relative humidity in Air. Range: 0 to 100 % Size: A)85 mm. Plastic body B) 85 mm. metal body, Golden Ring C)105 mm. metal body, Golden Ring

• Depth:: 190 mm (7.5 in.)
• Height:: 26 mm (1 in.)
• Width: 63 mm (2.5 in)
• Weight: 260 g (0.6 lb)

This compact, portable unit provides fast and accuratemeasurement of relative humidity and temperature ofstacks of paper. APPLICATIONS Paper, stacks, and reams SPECIFICATIONS Humidity Range: 0 to 100% RH Accuracy: ±2%RH from 20°C to 25°C (68°F to 77°F) Humidity Resolution: 0.1% RH Certified to NAMAS humidity standards Temperature Range: -5°C to +50°C (23°F to 122°F) Temperature Accuracy: ±0.5°C (±0.9°F) Temperature Resolution: 0.1°C or 0.1°F Response time: less than 10 seconds at 25°C FEATURES Dual display of humidity and temperature Display hold Multi-position probe Battery test function Automatic power shut-off after 2 minutes

• Voltage: 230 V
• Display Type: 0.56"
• Frequency: 50-60 Hz
• Brand: System Controls
• Phase: Single
• Humidity: Less than equal 70%
• Showing of Numbers: 3 Digit
• Input: DC Volt
• Warrenty : 1Year

Temperature Range Above Ambient To 99.9 Degree C / 0 C To 99.9 Degree C/ -10 C To 99.9 Degree C  Accuracy + 0.1 Degree C TO 0.5 Degree C  Applications This equipment is specially designed for tests in the field of Medical / Agricultural / Bio-chemical / R & D & Q.C Laboratories & also suits various IS & A S T M Standards.  Construction Double walled, Exterior of CRCA / GI Non-contaminant Epoxy Powder coated & Inner chamber of AISI S.S 304, with PUF insulation, S.S Lid on top with provision for holding Viscometer Holders.  Circulations Efficient Motor of 1440 RPM Top Mounted is installed for stirring to get temp. uniformity.  Heaters S. S Tubular Heaters for maintaining of temp.  Refrigeration System Hermitically Sealed compressor provides temp. for below ambient conditions. Refrigerant CFC Free. g Temperature Control Solid state electronic Digital Temp. Control panels housing all the control switches with PT-100 Sensor. o Optional Models available as per GMP / Complete S.S unit, Strip Chart Recorder. Microprocessor based PID temp. Control with printer interface, RS 232 CPC / RS -485 interface for multing networking of controller. (Data Logger).  Validation Protocols Validation Protocols for IQ, OQ, PQ, DQ complete documentation with reports, Calibration & Test Certificates. r Safety Features Safety thermostats for over shooting of temp. safety circuit to cut off the whole system in case of malfunction (Applicable to microprocessor based models only) HRC fuses for compressor heaters & mains, time delay circuit for safety of compressor.

• Range: 0 – 60 m/sec
• Output: 0–20 / 4–20 mAmp / RS232 / RS485 / Pulse Output
• Sensor: Cup type Anemometer
• Sensing: Optical – Chopper wheel
• Starting Threshold: < 0.3 m/ sec
• Accuracy: 2.00%
• Radius of Cup: 64mm
• Radius of Assembly: 250mm
• Height: 270mm
• Cup Material: Aluminum / Stainless Steel
• sensor Body: Aluminum / Brass / Stainless Steel

For measuring viscosity of non newtonion liquid such as paints, resins etc.

• Material: Stainless Steel
• Size: 11-15 mm
• Length: 130 mm
• Color: Grey
• Use: Surgical
• Surface: Polished

• Scale: 2.5 mm thick Milky white Acrylic Scale, with Black WITH SCREEN PRINTING LETTERS graduated in mm
• MANOMETRIC FLUID: RED GAUGE OIL .SP.GR.0.823
• END CONNECTION: ¼"BSP( F ) OR PVC NOZZLE TYPE.
• PAKING: NEOPRINE/PTFE.
• MOUNTING: WALL PANEL & FLUSH MOUNTING HOLES
• ARRANGEMENT: ZERO ADJUSTING KNOB .LEVEL BULB.
• ACCURACY: +/- 0.25%,+/-0.1% OF F.S.D OR BETTER.
• TEST PRESSURE: 1.5 TIME OF OPERATING PRESSURE.
• TEMPERATUE: BELOW 70 DEG.C

We are a reliable Manufacturer, Exporter & Supplier of Viscosity Bath. The Viscosity Bath offered by us is used for highly stable viscosity bath temperatures. The Viscosity Bath comes with a digital measurement and display. We offer Viscosity Bath that is sturdy, durable, and efficient and offers reliable performance. The Viscosity Bath can e availed from us at competitive price.

• Brand Name: Mitutoyo
• Material: Stainless Steel
• Size/Dimension: 0.01 to 150 mm
• Measuring Range: 6 inch 
• Display Type: Digital
• Model Name/Number: vernier caliper
• Usage/Application: Industrial

Vernier Caliper is a precision instrument that is used to measure internal and external distances accurately. Our range of Vernier Caliper is highly appreciated by the clients for the features like durable finish, less maintenance, optimum performance and accurate results. Vernier Caliper that we provide is known for providing zero error, which makes it highly preferable.

Suitable for continuous or intermittent, monitoring of central venous pressure during infusion particularly in ICU, CCU, OT’s and casualty departments. Manometer tube with graduation from –4 cm to +34 cm and attached to three way tap. 120 cm. long extention tube is fitted with female luer lock on one end and male luer lock on the other end for safe connection to central venous catheter. Injection site is provided additionally for extra medication. Sliding indicator provided to record previous reading. Moulded clamps with elastic strings are provided for easy fixation on the I.V. stand. Sterile, individually packed in peelable pouch. Category reference code

• Brand Name: Insize
• Material: Steel
• Size/Dimension: 150mm to start
• Accuracy: 0.03mm
• Display Type: Digital
• Usage/Application: Industrial

• Type: Ampere Hour Meters
• Color: Brown, Grey, White
• Application: Indsustrial Usage
• Display Type: Digital
• Automatic Grade: Fully Automatic, Semi Automatic
• Body Material: Aluminum, Brass, Cast Iron, Copper
• Power Source: Electric
• Feature: Accuracy, Durable, Light Weight, Low Power Comsumption, Stable Performance