Screw Pumps Dealers in Naigaon, Mumbai

• Pressure: Δp
• Capacity: Q
• Up to 535 m3/h: Viscosity Range
• V: 0,6 to 1500cSt
• Temperature of pumped liquid: t
• up to 100 C: Inlet Pressure
• Ps: up to 10 bar
• Outlet Pressure: Pd
• up to 16 bar: Difference
•  :  
• up to 16 bar: Speed
• n: up to 2900 rpm

• Color: Blue
• Type: Three Spindle Screw Pump
• Country of Origin: India

Settima-Delta Three Screw pumps employ just three screw elements - one power screw and two idler screws running in the three precision bores in the housing or liner. The screws are so profiled that they form a liquid tight seal between the thread. As the screws rotate, pockets/ cavities are formed where liquid gets trapped and conveyed from one end of the infinite stroke. This results in smooth, pulsation free flow with extremely low noise and vibration levels, almost impossible to be achieved by any other design of positive displacement or other types. The power rotor does not drive the idlers as commonly believed. The hydraulic forces acting on screw flanks turn the idlers torquelessly thus reducing the friction. The idlers simply roll over the root diameter of idler dia.reduce the unit pressure, centralize the power rotor and absorb the radial loads. A balance piston integrally machined on power rotor takes care of axial thrusts.  While in operation, the screws are in hydrodynamic balance on film lubrication and do not require any additional bearings. The one ball bearing often used is only for axial positioning of rotor and safer operation of mechanical seals. Small rotor dimensions enable the pump to be operated at high speeds directly coupled 3000 or 3600 RPM motors or other prime movers. Such unique design and features has demonstrated excellent reliability with pumps in operation continuously non-stop for decades together without replacement of any components or maintenance on clean fluids.     Typical Applications Fuel Oil Service: Fuel oil burner service for Thermal Power Plant/ Industrial Package, Boilers, Furnaces, Kilns and Combustion systems. Fuel transfer and booster service for Captive Diesel/ Gas Turbine Plants and Industrial Combustion Systems, Fuel Oil Circulations and Centrifuge Feeding. Tank farm tank to tank transfers. Hydraulic Duties: Hydraulic governing service for Water Turbines, Inlet Penstock Valves. Low and medium pressure hydraulic applications, high pressure jacking oil service for rotor lifting for Turbines/ Compressors/ Alternators. Lubricating Duty: Pressure lubrication and cooling of bearings for Turbo Machinery, Gear Boxes, Bearing Lubrication of Coal Mills, ID/FD Fans, Diesel Engines, Steel Rolling Mills, Air pre-heater guide bearings, Compressors. Seal Oil Service: Hydrogen cooled Generators, Gas and Refrigeration Compressors.

PC – 12B Mini Condensate Drain Pump Low noise control Compact modern design High flow rate Built – in alarm circuit Suitable for all kinds of air conditioners Voltage : 100 ~ 230V,  50/60 Hz Suction lift : Max.2m(6.5ft) Discharge head :  Max.10m (26ft) Flow rate : Max.12L/H (3.2GPH) Tank capacity : 35ml

• Additives: Paraffin
• Base oils: Petroleum products
• Bitumen: Polyester
• Fuel oils - all grades: Residues
• Lubricating oils - all grades: Soap
• Lyes: Vegetable oils

Delta Twin Screw pumps work on unique principle that makes it the only choice for certain applications. No other design of Positive Displacement Rotary pumps offer so much versatility in the operating parameters with guaranteed total reliability and maintenance-free service. Delta Group have earned a reputation of providing the most reliable Positive Displacement Pumps for practically any given application since 1968 due to the widest choice of designs available and excellent knowledge of application engineering. Continuous Research and Development together with modernization with CNC machines and testing facilities has enabled us to accept challenging jobs. Several of Delta pumps in operation since decades to the total satisfaction of the users in core industries throughout the country and abroad are a silent testimony.Working PrincipleA pair of specially profiled screw, machined integral from solid stock and well supported on antifriction bearings run in precision bored interchangeable casing liners. Each screw set has one right hand and one left hand screw engaging with a similar but opposite hand screw pair. A pair of hardened and profile ground timing gears synchronize the screws to maintain a small but positive clearance between the flanks thus ensuring no metal to metal contact. The pumps can therefore run dry for sometime without any damage. This unique feature enables to run the pump even dry and handle fluids that do not have enough lubricating value and also very low or high viscous products. Consequently, since there is no metal to metal contact; wear and tear is reduced to the minimum, ensuring extremely long service life. With two pairs of screws running in the same casing, the internal velocities are very small - consequently the NPSHR is practically the lowest even when the pumps run at motor speeds and while handling viscous products. Opposed screw pitches totally eliminate axial thrusts. Relatively small diameters of screws enables the pump to operate at high speeds directly coupled to prime movers - without the need for speed reducers even while handling high sealing’s always under suction pressure, thus making use of simple, inexpensive seals. The axial flow without turbulence, rotation, churning, chewing guarantees gentle handling of products. Noise and vibration or ---- levels are about the lowest. Positive clearance between running parts makes it easier to construct the pump in different materials safely, especially in stainless steel, without the fear of seizing. Thus a variety of fluids can easily be handled by selecting the right materials of construction.Typical ParametersTemperature: -30 to +350°CViscosity: 1 cSt to 50,000 cSt or moreCapacity: 20 to 500 m3/hr Pressure: Normal 16 bar/ 24bar, with special designs upto 50 barSpecialties: Partial heating/ complete heating/ cooling arrangementsSealing: Stuffing box/ mechanical seal with or without quenching/ heating/ coolingMounting: Horizontal foot mount/ vertical pedestalAccessories: Relief valves, base frame, coupling, coupling guard, companion flanges, pressure gauges, electric motor/ diesel engines, variable speed drives and as per customer requirements.Salient FeaturesPositive clearance between rotors Insensitive to varying viscositiesNo metal to metal contact between rotors Long maintenance free serviceDry running capability Lowest NPSHRNegligible wear over years Shaft sealing at suction pressuresAxial smooth steady flow Axial thrusts completely eliminatedHigh speed running Interchangeable linerPulsation free output Adaptability of various MOCNegligible vibrations Typical ApplicationsLoading / unloading of fuel oil and other products from: Railway wagon rakes, Truck tankers, Barges, Ships and Tankers.Bulk cargo handling.Lubrication, circulation and cooling.Process pumping of high viscous products, bitumen, molasses, soap and similar products.Long distance pipeline pumping of viscous products. Typical Liquid ListAdditives ParaffinBase oils Petroleum productsBitumen PolyesterFuel oils - all grades ResiduesLubricating oils - all grades SoapLyes Vegetable oilsMolasses Major IndustriesPetroleum refineries, Terminals, Depots, Oil blending stations, Thermal power plants, Steel plants, Fertilizer industries, Petrochemical plants, Carbon black, Sugar, Paper and Pulp, Marine.

• Type: Helical Rotor Pumps
• Application: Beverage Industries, Chemical Industries, Food Industries, Pharmaceutical Industries
• Weight: 0-5 Kg, 5-10 Kg
• Voltage: 110-220V, 220-440V
• Automatic Grade: Manual, Semi Automatic
• Power: 0-5Kw, 10-15Kw, 5-10Kw
• Driven Type: Electric, Solar
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Running RPM: 0-1400, 1400-2800, 2800-5600

Progressive Cavity Pumps, Internal Gear Pumps, Internal Gear Pump

Positive Displacement Pump, Gear Pumps, Rotary Pump, Screw Pumps

food industry pump, bitumen pump, ldo pump