SEALEXCEL INDIA PVT LTD Jogeshwari West, Mumbai, Maharashtra

TWO THREE WAY BALL VALVES , • TwoThree way Compact Design. • Trunnion Ball Design having bearing support to minimize operating torque and seat wear. • Blow‐out Proof Stem. • Panel Mounting. • Low Operating Torque. • Handle Indicates Direction of Flow. • Positive Handle Stops. • Spring Loaded Peek Seat ensure perfect sealing. • Variety of End configuration includes SEALEXCEL® Well-Lok™ Tube Fittings, NPTBSPT pipe connections. • 100% Factory tested.

SEALEXCEL Bite-Lok TM Tube Fittings are designed according to DIN 2353 and carefully manufactured to provide leak free connection between tube and components in fluid systems which ensure maximum reliability, optimum performance and operational safety

SEALEXCEL Well-lok Twin Ferrule Compression Tube Fittings have been carefully design to 4:1 safety factor and manufactured to close tolerances to provide leak-free performance in Instrumentation, process tubing etc. SEALEXCEL Well-Lok Tube Fittings are type approved to ECE R110, ISO 1500, ASTM F1387-99 (2005), BS4368 part 4:1984, and Helium Leak Test.

SEALEXCEL Fine-Lok Single Ferrule Tube Fittings have been carefully design and manufactured to close tolerances to provide leak free performance in control system, process instrumentation devices etc. The components of Fine-Lok Tube Fittings and Well-Lok Twin Ferrule Tube Fittings are totally interchangeable with each other.

We are offering toggle valves. Toggle valves : series - tgv01 stainless steel 316 toggle valves features • available in ss316 all wetted parts in accordance with nace mr01-75 • heat code traceable to certified material test report • rugged and compact design • quick opening and closing • straight and angle flow patterns • panel mountable • flow coefficient (cv) from 0.11 to 0.70 • orifice sizes : 0.080" (2mm), 0.125" (3.2mm), 0.250" (6.4mm) • variety of end configurations includes sealexcel® well-lok™ tube fittings, malefemale npt, bspt and bspp pipe connection. • every valve is factory tested.

Available in SS316, all wetted parts in accordance with NACE MR01-75 Heat Code Traceable to certified material test report Rugged and compact design Quick opening and closing Straight and angle flow Patterns Panel mountable Flow coefficient (Cv) from 0.11 to 0.70 Orifice sizes : 0.080" (2mm), 0.125" (3.2mm), 0.250" (6.4mm)

• Available in Material Ss316 • TwoThree way Compact Design. • Trunnion Ball Design having bearing support to minimize operating torque and seat wear • Blow-out Proof Stem. • Panel Mounting. • Low Operating Torque. • Handle Indicates Direction of Flow. • Positive Handle Stops. • Spring Loaded Peek Seat ensure perfect sealing.

Available in Steel and Stainless Steel 316 Seal Ring are available in NitrileEPDMViton®Aflas® Hardened bearing races for extended service life. Full Flow design minimizes pressure drop for optimum system performance. Sealed bearing design isolated bearing race from media and environment. Reduced bearing load design minimizes wear in the bearing race and extends services life.

Stainless Steel Tubing Fittings high quality product design with the following features, All our well lock tube fittings have been designed with four key precision components that include the front ferrule, Metric Tube to Female ISO Tapered Thread Connection.

We are offering Stainless steel quick exhaust valves allows direct exhaust of compressed air due to increase of cylinder rod displacement speed, this result in reductions of cycle time. We offer a line-up of quick exhaust valves that meet a variety of application requirements. Our robust valves allow rapid cylinder return. Sealexcel manufactures a wide range of quick exhaust valves that are durable, dependable and manufactured to the highest standards of quality.

SEALEXCEL® Stainless Steel Push-in-Fittings consist of six precision components such as Body, Releasing Sleeve, Washer, Gripping Collet, Guide Rings and 'O' Rings. These components have been carefully designed and manufactured to meet the high quality requirements in Pneumatic Applications.

Stainless Steel Pneumatic Check ValvesOur stainless steel pneumatic fittings product series has been designed to ensure a single flow of direction. The valves have been designed to withstand a pressure rating within a system of around 0.5 to around 40 bar.

Stainless Steel 316 Needle Valves,• Available in SS316, all wetted parts in accordance with NACE MR01-75 • Heat Code Traceable to certified material test report • Low operating Torques • Forged Body, straight and Angle patterns • Panel mountable • Variety of stem tips • PTFE packing standard • Flow coefficient (Cv) from 0.09 to 1.8 • Orifice size : 0.078" (2mm), 0.172" (4.4mm), 0.250" (6.4mm) 0.375" (9.5mm) • Variety of end configurations includes SEALEXCEL® Well-Lok™ Tube Fittings, MaleFemale NPT, BSPT and BSPP pipe connections • Every valve is factory tested.

Stainless Steel 316 Ball Valves, • Available in SS316 • Heat Code Traceable to certified material test report • Two piece body design, Bi-directional Flow • PTFE or PEEK Ball Seat, Bubble tight shut-off • Anti blow-out stem, Low torque operation • Floating ball design provides seat wear compensation • Quarter turn positive stop handle • Connector thread environmentally sealed • Variety of end configurations includes • Variety of end configurations includes SEALEXCEL® Well-Lok™ Tube Fittings, MaleFemale NPT, BSPT pipe connection • 10 mm bore ball • Every valve is factory tested

Available in SS316L Reliable leak tight sealing system Full Flow without pressure drop Tube sealing and locking by tightening the nut Available with NPT, BSPT, BSPP and SAE Straight thread pipe connections Available Metric Size : 6mm to 12mm Tube OD Fractional Size :14" to 12" Tube OD

Sealexcel Flow Control Regulator, The temperature rating of a flow regulator valve has been designed to withstand the system temperature effects of up to around 120O C Our flow control regulator units are designed with special operating parameters to withstand a pressure rating up to 10 bar.

We are offering rising stem plug valves . • available in ss316, all wetted parts in accordance with nace mr01-75 • heat code traceable to certified material test report • bar stock body straight patterns • straight through orifice hence roddable for easy cleaning • replaceable seals and seats • stem dust seal protect stem from external contamination. • rolled and plated thread for greater strength and smoother operation • packing below the threads prevents lubricant washout. • panel mounted feature option • gauge ports available • variety of end configuration includes sealexcel® well-lok™ tube fittings, male female npt, bspt, bspp pipe connection. • orifice size : 0.187” (4.8mm) and 0.250” (6.4mm) • every valve is factory tested.

• Available in Material SS316, all wetted parts in accordance with NACE MR01-75 • Material Traceable to certified material test report • Bar Stock Body Straight Patterns • Straight through orifice hence roddable for easy cleaning • Replaceable seals and seats • Stem dust seal protect stem from external contamination. • Rolled and plated thread for greater strength and smoother operation • Packing below the threads prevents lubricant washout. • Panel mounted feature option

These valves allows direct exhaust of compressed Air due to increase of cylinder rod displacement speed, this result in reduction of cycle time. • Available in SS316L with Viton® 'O' Ring

The quick exhaust valves are designed to be highly sensitive and exert differential pressure across the diaphragm to open the exhaust. The latest valves are now being design with a lightweight material, which can easily be supported by the piping of the system.These corrosion resistant fittings have an oil resistant diaphragm, and the high quality fittings also ensure quite operations, unlike the usual chattering of the low quality valves. These valves ensure a rapid return and turn volume of the cylinder, and offer multiple porting options for efficient systems.

Available in SS316 with Viton 'O' Ring Robust in Construction. High Flow Capacity. Positive Valve stop. Captive valve seal ensures leak free sealing, minimize the seal washout or damage from high velocity Fluid acceleration. Seal with PTFE back- up rings designed to ensure reliable and leak free sealing even in high pressure application.

We are offering purge valves. features • available in ss316l • heat code traceable to certified material test report • compact and convenient installation • vent tube design prevents accidental removal of the stem • vent tube directs excess liquid or gas from system line • flow coefficient (cv) 0.25 • orifice size 0.125" (3.20mm) • variety of end configurations includes sealexcel® well-lok™ tube fittings, malefemale npt, bspt pipe connection • every valve is factory tested.

Available in SS316L Heat Code Traceable to certified material test report Compact and convenient installation Vent hole in the cap bleeds, drains or purges system pressure Cap is crimped to valve body to prevent accidental disassembly Require only quarter turn with a wrench from finger tight position to ensure a leak tight seal

We are offering precision pipe fittings and adapters are designed and manufactured to very stringent tolerances under rigid quality control procedures approved to iso 9001:2000 to provide leak free connections for chemical etc.