Sensor Transducer Dealers in Andheri, Mumbai

Life-Care "Fast - Clean" Immersible Ultrasonic Transducers can be placed wherever you need them in your existing cleaning tanks. These units give you complete freedom to design specialized cleaning setups or to upgrade pre-soak tanks with ultrasonic.

For steam turbines, the relative case expansion (due to thermo effect) should be monitored. LVDTs can be used to measure the case expansion. Three configurations are available. The range is from 25mm (1.0 inch) to 100mm (4.0 inches).

• Linear volume flow rate actual value: 0 – 10 V DC or 2 – 10 V DC

Standard filtration in comfort air conditioning systems allows for use of the transmitter in the supply air without additional dust protection. Since a partial volume flow is passed through the differential pressure transducer in order to measure the volume flow rate, please note:With heavy dust levels in the room, suitable extract air filters must be provided.If the air is polluted with fluff or sticky particles, or if it contains aggressive media, dynamic pressure transducers cannot be used

We Offer Active Power Transducer. This transducer is used for measurement of Active Power for single phase (STE-A-3T) system as well as for 3-phase, 3-wire (STE-B-3T) system and 3-phase 4-wire (STE-C-3T) systems with balance and unbalanced load. They are suitable for measurement of both import and export of power. The output is a load independent DC current or voltage which is proportional to input power. The output can be connected directly to indicating instruments or to data transmission system. Feature • Available in accuracy class - 0.2, 0.5 & 1.0 • Withstands wide temperature variations. • VA burden on CTPT very low. - < 0.5 VA • Low internal consumption • Wide range of Input Output to meet National International requirements. • Comply to revised IEC 60688 (1997-10) standards. • Flexibility in auxiliary power supply requirements - A.C. D.C. • Rugged and vibration resistant. • Withstands seismic test as per IEC 344-1974 for Nuclear Power applications. • Available in dust proof sheet plastic enclosures suitable for Back panel Din rail mounting. • Multiple outputs also available - upto 4 • High input Output isolation - 4.0 KV.

We are offering frequency transducer ste-a_5t converts a frequency into an output signal that can serve several receiving instruments such as indicators recorders, alarm units etc. The input voltage signal is stepped down and galvanically isolated by a transformer t. The zero crossing of the signal is detected to triger a precision quartz controlled monostable circuit q. For each cycle of the input signal, the monostable switches a highly stabilized d.c.voltage to an amplifier a. The output of the amplifier, a constant voltage with fixed pulse width is filtered and averaged. The average signal is proportional to the frequency of the input signal. To suppress the initial range, for instance up to 45hz a fixed voltage is subtracted. The difference is fed to a current converter c to provide a load independent d.c. Current output, which can be either bipolar or unipolar

• Brand Name: ELAP
• Model Name/Number: PD 100
• Supply Voltage: 5 VDC or 10-24 VDC
• Stroke Length: 60 mm
• Stocking Temperature: -20 Deg C To 70 Deg C
• Max Speed: 60 m/min
• Protection Degree: IP6
• Progress Strength: 1 / 3 N

LVDT transducers, Heavy Vehicle Products, Industrial Products

power transducer, Temperature Controller, Digital Temperature Controller

Honeywell Pressure Transducers, petrochemical plants, biofuels

Pressure Transducer / Transmitters, Lube Oil Filtration Systems