Sensor Transducer Dealers in Mumbai

We Offer Ac Voltage Transducer. The Voltage transducer converts a sinusoidal AC Voltage signal into an output signal that can serves several receiving instruments such as indicators, recorders, alarm units etc. The input Voltage is scaled down using a Voltage transformer T. The output of the transformer is rectified and filtered in a precision absolute amplifier A, incorporating integrated circuits. The amplified filtered output is proportional to R.M.S value of the sine wave input. The output is fed to a current converter 'C' to provide a load independent D.C. Current. Feature • Available in accuracy class index -0.2, 0.3, 0.5 & 1.0 • Withstands wide temperature variations. • VA burden on PT very low. - < 0.5 VA • Wide range of Input / Output to meet National / International requirements. • Comply to revised IEC 60688 (1997-10) standards. • Flexibility in auxiliary power supply requirements - A.C. / D.C. • Rugged and vibration resistant. • Withstands seismic test as per IEC 344-1974 for Nuclear Power applications. • Available in dust proof sheet plastic enclosures suitable for Back panel / Din rail mounting. • Multiple outputs also available - up to 4. • High input / Output isolation's - 4.0 KV.

• Power: Electric
• Application: Static Application Use
• Frequency: 50hz

We are counted amidst the major Ultrasonic Immersible Transducers Manufacturers and Suppliers in Maharashtra (India). These Ultrasonic Immersible Transducers can be placed anywhere in the existing tanks. Moreover, our Ultrasonic Immersible Transducers allow the user to design the specialized cleaning setup, as per his/her requirement. The Ultrasonic Immersible Transducers are available with us at the market leading prices. Description Low noise : Noise level is less than to 70 dl certifiedHigh temp : With a temp range up to 80oc for continuous processChilling : With a temp less than @10oc from normal room temperatureDigital temperature controllerLow cost & optimized machine for specialized needsPower controller : Stepless 10% to 100% power control, which allows for selecting the power levelPre cleaning chamber : For removing maximum contamination by using jet spraying or air agitationU/s cleaning chamber : Precession cleaning by using U/s power and proper chemistry, and temperature max cleaning is done from the surfaceRinsing chamber : The suspended contamination after ultrasonic cleaning is cleaned by using air agitation or jet sprayingDrying chamber : The forced hot air drying chamber utilizes evaporation, which is one of the most common drying techniques for removing water. Room air is heated to 80oc, which enables it to absorb moisture from the part.Fabricated from 304 / 316 Stainless Steel, along with welded seams & stainless steel fitting. These hermitically sealed modular components are available in standard sizes.Can be custom built, as per special applications for more space savingFlat transducers plates can be built into the tank bottom or side walls

• Country of Origin: Made in India
• Brand: Atlas Copco
• Size: Small
• Operating Temperature: -40 to 105 Deg C
• IP Protection Class: IP67
• Packaging Type: Box
• Torque: 40 Nm

We are a Dealer, Supplier of Keller. We stock and supply running models are Keller Pressure Transducers, Keller OEM Pressure Transmitters, Keller Intrinsically Safe Pr. Transmitters for Hazardous Applications, Keller Submersible Level Transmitters, Keller High Precision Digital Pr. Gauges, Keller Pneumatic & Hydraulic Pressure Calibratorsa. We are supplier in India, Mumbai, Delhi, Ahmadabad, Chennai, Pune, Nashik, Vapi, Aurangabad, Nagpur, Sangli, Satara, Ichalkarnji, Solapur, Kupwad, Kolhapur, Pimpri, Chinchwad, Jalgaon, Silvassa, Surat, Baroda, Morbi, UAE, Indore, Bhopal, Gurgaon, Faridabad, Ghaziabad, Noida, Coimbatore.  

We are bracketed among the trusted Suppliers of Industrial Pressure Transducers. The Pressure Transducers offered by us with reverse polarity protection on input and short circuit protection on output. Our range of Transducers is extensively used in refrigeration systems, automotive test stands, agricultural equipment, etc. Buyers can obtain it competitive rates from us.

• Type: Voltage Transducers
• Material: Aluminum, Plastic, Stainless Steel
• Weight: 0-2kg, 2-4kg, 4-6kg, 6-8kg
• Feature: Accurate Results, Durable, Excellent Performance, Fine Finished, High Quality
• Voltage: 12VDC, 24VDC
• Condition: New, Used
• Application: Static Application Use
• Frequency: 50hz, 60hz
• Power: Electric
• Phase: Diouble Phase, Single Phase, Tripple Phase
• Warranty: 1yrs, 3yrs
• Load resistance: 0-500ohms, 1000-1500ohms

• Models: VMT BPVMT
•   Type: DIN Mounting, Back Panel Mounting
•   AC Input: 0 – 63.5, 110, 230, 300, 440, 500V, Through PT for Higher Voltages
•   DC Output: mA: 0-1, 0-5, 0-10, 0-20, 2-10, 4-20mA V : 0-1, 0-5, 0-10, 1-5, 2-10V
•   Auxiliary: 110V AC, 230V AC, 12VDC, 24V DC, 48V DC, 110V DC, 220V DC, Self Powered
•   Accuracy: Standard : ± 0.5% of Span Optional : On Request
•   Standards: IEC 688, IS12784

Our company is one of the well-known Suppliers of Voltage Transducers in Mumbai. Voltage Transducers are widely used for automation and control of the power and process systems as well as for local and remote monitoring of the electrical parameters at every stage of electricity generation, transmission and distribution. The Voltage Transducers have high accuracy, reliability and performance. Voltage Transducers come with unique galvanic isolation in both the inputs and fast response time of

Available versions: Standard; ATEX; CSA; Schiff & Offshore; with front-flush diaphragm The The pressure transducer series HDA 4300 is equipped with a ceramic pressure measurement cell with thick-layer DMS, which was specially developed for relative pressure measurement in the low-pressure range. The 4 ... 20 mA or 0 ... 10V enable the connection to all measurement and control devices of HYDAC ELECTRONIC GmbH and the linkage to commercially available control and regulation units. The variant with the front-flush diaphragm was specially developed for applications in which the media used could lead to a blockage, gumming-up or freezing of a standard pressure connection. The main areas of application lie in the low-pressure ranges of hydraulics and pneumatics, particularly in refrigeration and air-conditioning, food and pharmaceutical industry applications. Further applications include processes where the medium changes frequently and any residues could cause mixing or contamination of the media.

We are offering power factor transducer the ste-a-7t transducer converts the phase angle between current and voltage of a single phase or 3 phase balanced network into an output signal that can serve several receiving instruments such as indicators, recorders, alarm units etc.

Hermetically sealed, available with diff freqs, different power levels, long life, modular, compact generator, ss 316l construction,.

• Power: 230VAC and 24 VDC
• Features: Longer service life, Sturdy construction, Consistent operation
• Resistance: 0-10 K 
• Mounitng: DIN rail

We offer Multifunction Power Transducer with Display. * Meets to DN-IEC 688. * Easy Installation & Space saving. * Simultaneous detect & display : • Individual Phase to neutral Voltage • Individual Phase Current • Individual Phase watt. • Frequency • Phase to Phase Voltages. • Power Factor • Total Watt • Total Var • Watt Hour (10 digit) • Var Hour (10 digit) * CT Ratio & PT Ratio - user settable on instrument by front panel keys. * Circuit selection of 1Ø2W, 1Ø3W, 3Ø3W, 3Ø4W - user settable on instrument by front panel keys. * Auto Manual scrolling Display

• Brand Name: ELAP
• Model Name/Number: PD 100
• Supply Voltage: 5 VDC or 10-24 VDC
• Stroke Length: 60 mm
• Stocking Temperature: -20 Deg C To 70 Deg C
• Max Speed: 60 m/min
• Protection Degree: IP6
• Progress Strength: 1 / 3 N

High Reliability Large core-to-bore clearance Operating temperature up to 220°C (option) Stroke ranges from ± 0.05 to ±10 inches AC operation from 400Hz to 5kHz Stainless steel housing Imperial or metric threaded core Many options and accessories Description The HR Series general purpose LVDTs provide the optimum performance required for a majority of applications. The large 1/16 inch [1.6mm] bore-to-core radial clearance provides for ample installation misalignments and therefore reduces the application costs. Featuring a high output voltage and a broad operating frequency range, these versatile and highly reliable LVDTs deliver worry-free and precise position measurements. Features 0.25% linearity (100% stroke) Large 1/16” core-to-bore clearance Shock and vibration tolerant Electromagnetic/electrostatic shielding Mild radiation resistance (optional) Calibration certificate supplied with each unit Applications Process control Factory automation Materials testing Metrology Applications with large misalignments General industrial

• Accuracy: ± 0.5% of Rated output, ± 0.2 % (Optional)
• Output Ripple: 0.2% RMS
• Response: Less than 0.5 Sec.
• Storage Temp: -20°C
• Overload Continuous 2: 2 x Rated Current, 1.2 x Rated Voltage
• Breakdown Impulse Voltage: 4.5KV , 1 x 40µs (without dewing.)

MECO-G" AC Frequency Transducers convert a sinusoidal AC signal into a standard DC signal which is directly proportional to the measured input signal, These outputs are accurate, reliable, consistent and stable which are suitable for Telemetering, Dataloggers, PLC's, SCADA systems and control applications.

PRESSURE TRANSDUCER, 0 to DC 100mV 6 models : 2/5/10/20/50/100/400 bar. Zero pressure - 0 DCV, Full scale - 100 mV. Power supply : DC 9V to 30V. 4 wires : 2 wires for power, two wires for signal.

• Accuracy: +-0.25 %FSS
• Brand: Honeywell
• Current Rating: 3A
• Model Name/Number: Honeywell's PX3 Series Heavy Duty Pressure Transducers
• Ambient Temperature: -40 C to 125 C [-40 F to 257 F]
• Ce Conformity: Yes
• Mounting Type: Brass housing and Metri-Pack 150,DIN,or cable harness electrical connections
• Short Circuit Protection: Yes

• Pressure Range: 0-3.5MPa--0-150MPa(0-500psi---0-30000psi)
• Over Pressure: 1.5 X FSO
• Max Diaphragm Temperature: 400oC

MA1200 Series Economic melt Pressure Transducer designed for economic applications. The model MA1200 and MA1300 are introduced with automatic zero adjustment. This series can be used together with the PVI Series Intelligent Digital Pressure Instrument of Omicron or other brand instrumentation. Zero & full span can be adjustable externally if required, with amplify signal can be connected with PLC. With the advantage of high precision and reliable pressure measuring and good quality, internal 80% calibration and etc.

• Feature: Compact size, Accurate reading, Leak-proof nature
• Material: Steel
• Power: 900 W
• Brand Name: Highclean Ultrasonics
• Frequency : 28 KHz
• Accuracy : 93%
• Dimension: 406 x 305 x 100 mm

We are offering Pressure Transducers.

• Features: Heavy Industrial CE Approval , 100 V/m EMI Protection

The M5100 series pressure transducers from the Microfused™ line of MEAS, set a new price performance standard for demanding commercial and heavy industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids.

• Brand Name: BIMCO
• RED: blue
• black: silver
• red: yellow
• grey: blue
• silver: black

The Series 672 Low Pressure Transducer is a perfect solution to any application where a very accurate low pressure transducer is necessary. Using variable capacitance technology, the Series 672 is designed to measure pressures as low as 10" w.c. up to 400" w.c., very low ranges for a single connection pressure transducer. The 672 also features a 0.25% F.S. accuracy. Use the Series 672 in liquid level, flood warning, waste water, clean room, and open channel flow applications.

• Accuracy: 0.20 % FS
• Brand: Jupiter
• Part Number: P1200
• Suitable Media: Liquid
• Pressure Range: 75 psi to 10,000 psi
• Supply Voltage: 10-12 V
• Process Connection: Screw Terminals
• Operating Temperature: -20 to 80 Deg C
• Frequency response: 2.5 to 40 kHz
• Insulation Resistance: 500 M Ohm at 50 VDC
• Contact System Type: TPST

Smart sensors and transducers limited have launched strain gauge based digital pressure transducer . The product design features include stainless steel design. These are manufactured in four series viz. precision (p), general purpose (gp) and low cost (lc) depending on accuracies of 0.25 %, 0.5%, 1% respectively. Because of their stainless steel construction (including wetted parts), these sensors are industrially rugged and highly reliable. These units measure a range of pressure from -1 kgcm2 to 1000 kgcm2. Pressure transducer are available in four different accuracies with temperature ranges from 0 to 80 deg c. The compact size makes them light weight and adaptable to be accumulated in locations where space restrictions pose problem. Being strain gage based, they are suitable for dynamic pressure monitoring, in addition to the conventional static pressure monitoring. The pressure transducer have wide application in process industries such as chemical and petrochemical, food, fertilizers, steel and cement plants, flow measurements, depth sensing and level measurements.