Seven Star Speciality Steel Sion, Mumbai, Maharashtra

Thickness : 5-50 mm

Brand Name : Seven Star

Material : Carbon Steel

Keeping in sync with the times, we also offer an extensive assortment of Structural Steel . These are widely used in automotive and other sectors because of their supreme quality, durability, performance and unmatched features. Our products are available in various grades, standards and sizes as per the needs and requirements of the customers. Moreover, we offer these products at pocket-friendly prices. Industrial Structural Steel With thorough industrial knowledge, we are engaged in manufacturing and supplying of a wide range of Industrial Structural Steel. The offered assortment is sourced from reliable vendors, who follow industry set guidelines in themanufacturing process. Before the final dispatch, all the offered products are stringently examined by a team of quality analyzers on various stages. Further our range of this products are available at very reasonable prices. Heavy Work Structural Steel Item Code: S690 Offering a wide range of heavy work structural steel for our customers. Bridge plate and building structure panels steel sheet are available in various grades like straight grade, low carbon grade and high carbon grade according to the requirement of our customer. Works designation: • Maxil 690 q / maxil 690 ql / maxil 690 ql1 din en s 690 q / s 690 ql / s690 ql1• S690 6mm - 200mm  Sailma 350/450 The unalloyed structural steels are the series of the typical high-strength steels, characterised by guaranteed minimum yield strength with additional steel-gradespecific guaranteed values such as tensile strength, fracture elongation and notch impact energy. The steels are used for slight drawing stress as well as for shaping and edging. 

The SAIL Hard Steel Plate are wear resistant plates with minimum certified hardness. These plates are required in various wear resistant applications. 

Application : Construction

Thickness : 2-30 mm

Brand Name : Seven Star

Material : Carbon Steel

weldox weldox is structural steel plate from ssab sweden. Weldox 700 is a general structural steel with a minimum yield strength of 700 mpa. Weldox 700 meets the requirements for the corresponding steel grades and qualities according to en 10025.applications load carrying structures having high demands on low weight.weldox 700d with guaranteed impact toughness at -20º c (-4ºf). Corresponds to s690qweldox 700e with guaranteed impact toughness at -40º c (-40ºf). Corresponds to s690qlweldox 700f with guaranteed impact toughness at -60º c (-76ºf). Corresponds to s690ql1size: 05mm~ 30mm x 1500mm ~12000mm. domex domex 700 mc is hot rolled, extra high strength, cold forming steel from ssab sweden. Domex cold forming steels are thermo-mechanically rolled in modern plants where the heating, rolling and cooling processes are carefully controlled. The chemical analysis, consisting of low levels of carbon and manganese has precise addition of grain refiners such as niobium, titanium or vanadium. This together with a clean structure, makes domex steels the most competitive alternative for cold formed and welded products.domex 700 mc with designation d and e meet and exceed the demands for steel s700mc in en-10149-2.applicationthe extra high strength steel grades are used in applications such as truck chassis, cranes and earthmoving machines. In these applications, the high strength of the steels is used to save weight and/or to increase the payload. As a result of this and the good formability of the steels, the total costs can be reduced.

Type : High Strength Steel

Material : Stainless Steel

Thickness : 1-100mm, 100-200mm, 200-300mm, 300-400mm, 400-500mm

Certification : ISO 9001:2008

Length : 1-1000mm, 1000-2000mm, 2000-3000mm, 3000-4000mm, 4000-5000mm

Application : Construction, High Way, Industry, Subway, Tunnel

Color : Grey, Silver, Silver Black

Width : 1-50mm, 100-150mm, 150-200mm, 200-250mm, 50-100mm

Dimension : 1-500mm, 1000-1500mm, 1500-2000mm, 2000-2500mm, 500-1000mm

Special Use : Cold Heading Steel, Free Cutting Steel, Mold Steelq, Valve Steels

we seven star speciality steel, is only authorised stockiest of acroni, slovenia for x 12 in india, having experience in this field for more than 20 years and catering to pan india customers including various shot blasting machine mfrs, steel mills, public sector undertakings and many more. wear resistant materialswarriors acroni, x12, 11- 14 % manganese plate warriors acroni, x12, 11- 14 % manganese is a true hadfield austenitic manganese steel for resistance to severe impact and abrasive wear. It is work hardening steel.work hardening refers to the fact that the steel becomes harder and harder the more it is impacted or compressed.the “hadfield” grade has an original hardness of approximately 220 brinell. With continued impact and /or compression it will surface harden to over 550 brinell.it should be noted that only the outer skin surface hardens. The under layer remains highly ductile and tough. As the surface wears, it continually renews itself becoming harder and harder. manganese steel is austenitic steel which means it is non-magnetic. This property makes it useful in many applications such as bottom plates for lifting magnets – separator drum shells for magnetic materials – wear shoes on electric brakes etc chemcial compositiontypical mechanical properties   note: actual field results may vary depending upon the application and overall conditions of use.advantages • resistance to high abrasion and severe impact• capacity of cold work hardening hardness to 550 bhn• to increase hardness from 200bhn (in as delivered plate) up to an in-service hardness of at least 600bhn.• have non-magnetic properties.• provide maximum wear life.• exceptionally high toughness & ductility.• easy gas cutting & good weld ability 

The EN19 Grade Steel Plate that we offer exactly matches the desirable plates of such kinds. It is of the best quality and endowed with high tensile strength. We are working in full throttle to make it available to the length and breadth of the country and abroad. We are one of the eminent Exporters and Suppliers of EN19 Grade Steel Plate from Mumbai, India.Applications:EN19T was originally introduced for the use in the machine tool and motor industries for gears, pinions, shafts, spindles and the like. Later its applications became much more extended and it is now widely used in areas such as the oil and gas industries. EN19T is suitable for applications such as gears, bolts, studs and a wide variety of applications where a good quality high tensile steel grade is suited.Forging : Pre heat carefully, then raise temperature to 850-1200oC for forging. Do not forge below 850oC. After forging cool slowly in still air.Annealing : Heat the EN19T slowly to 680-700oC. Cool in air. Hardening : This steel grade is commonly supplied ready heat treated. If further heat treatment is required annealed EN19 should be heated slowly to 860-890oC and after adequate soaking at this temperature quench in oil. Temper as soon as tools reach room temperature.Tempering : Heat carefully to a suitable temperature selected by reference to a tempering chart or table. Soak at the temperature for 2 hours per 25mm of ruling section, then allow to cool in air. Tempering between 250-375oC is not advised as tempering within this range will reduce the impact value.Heat Treatment: Heat treatment temperatures, including rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each steel component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of EN19T alloy steel. 

We are the leading manufacturers, exporters and supplier of this products.

Application : Construction

Material : Stainless Steel

Brand Name : Seven Star

Thickness : 132-460 mm

C45 Plates Seven Star is C45 Steel Plate stockholder and suppliers, delivering to the whole of the world. C45 steel plate have excellent quality to fully satisfy customer’s requirements. The C45 Steel Plate supplied by us are accepted by cents in various spares of the industries from basic industries such as Sugar, paper, textile, dairy engineering to more complex such as oil & gas, petrochemical chemical & fertilizers, power generation and nuclear industries.We offer high grade C45 steel plate at affordable price. These C45 steel plates are manufactured using finest grade raw material available to ensure international quality. These C45 steel plates are available in different shape size and thickness according to the needs of our customer. Owing to highly experienced group of qualified professional and use of latest technology machinery. SSSS have supplied high quality C45 steel plate and profiles to customers throughout India.C45 Steel Plate properties Chemical Composition % of Grade C45 Steel Plate 

Grade : C (%) Min - Max

Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service to ASTM A 516/ A 516M Standard ASTM A 516 or ASME SA 516 grade is one of the most popular steel grades. BOILER STEEL PLATE :The Boiler Steel Plates are widely used in fabrication of boilers in industries. These hot rolled steel plates are made available in variety of grades and thickness and are developed to a superior quality, deliberated to hold out the internal pressure in boilers and valves. Well known for its diversity of use and longevity, these boiler plates meet the exact requirements of the industries. The content of carbon in these high temperature steel plates are between 0.16 %-0.29 %. We also supply hydrogen induced crack resistant steel in SA / A516 Grade 70 HIC. The steel grade offered by us serves as default material for pressure vessel applications.  Available grades : ASME SA516 Grade 70 and ASTM A516 Grade 70 ASTM A516 Gr. 60 and ASME SA516 Gr. 60 Application Areas : Shipbuilding Petrochemical manufacturing Boilers, pressure vessels, gas turbines manufacturing Heat exchangers, spheres, compressors and storage tanks manufacturing Manufacturing of skid mounted equipment designed for the oil and gas industry Other industrial and commercial purposes

Application : Construction, etc

Material : Alloy Steel

IMPORTER , STOCKIST, TRADER AND SUPPLIER  Seven Star Speciality Steel is the leading Importer, Stockist,Trader and Supplier of Abrasion Resistant Steel PlateAbrasion resistant steel is used in areas where there is likely to be a high degree of abrasion or wear of the steel plate. Typical applications are in truck beds, attachments to diggers and earth movers and in processing applications in the mining industry.Abrasion Resistant Steel Plate Excellent Abrasion Resistant 4 or 5 times stronger than ordinary steelExcellent Workability Larger in elongation . Excellent Weldability Decrease deformation rate Wide range of sizes Available in a wide range of sizes.