Sewing Machines Dealers in Goregaon East, Mumbai

• Capacity:: 125-145pcs/min
• Operation:: Stable Working
• Warranty:: Two Years
• Controller :: PLC Control
• Screen:: Color Touch Screen
• Seal Type:: Pillow Bag
• Tracing System:: Photocell Tracing

We offer one edge machine with cream biscuit feeders. We offer our clients a wide range of one edge machine with cream biscuit feeders. These machines are used to pack cream biscuits of various specifications like 50 gm, 75 gm & 100gm. Further, these are available in sealing type and center seals types. Moreover, these machines have the capacity to produce 100 to 125 pouches per minutes.

While purchasing the product from us, you can choose to make payment through any mode. Our personnel will assist you to pay for your purchases conveniently. Packaging of products is as important as designing and manufacturing, and we have upgraded machines, assistance of our packaging experts to meet the standard as well as tailored packing needs of the clientele.

It can quickly detect the exact location of the broken needle inside the clothes so that ensure the safety.

• Weight: 100-1000kg, 2000-3000kg
• Voltage: 110V, 230V
• Condition: New
• Automatic Grade: Automatic
• Power: 1-3kw, 6-9kw
• Driven Type: Electric
• Warranty: 5 Years

Before Transportation The distilled water should be cleared before transportation. Open the distilled water discharge valve[5] as the picture shows (turning it to the counter clockwise and the pull out the stopper), discharge the distilled water, move the machine to help the distilled water get out completely. Notice While discharging the distilled water, the Cool & Heat work hand-rod should be placed at the handle support. Steps of Add Distilled Water Use distilled water or deionized water; Make sure the distilled water discharge valve[5] is closed; Use special funnel to connect to distilled water inlet[3]; Add distilled water or deionized water from the funnel; Add liquid until the level of the distilled water level window[7] arrive at 4.5; Add cooling fluid successfully first time; Connect power supply line[9], turn on general power switch[8]. Input password “000000" to enter interface as (Fig 1) shows, click on “Set” to enter interface as (Fig 2) shown. Click on “Liquid setting" to enter interface as (Fig 3) shows, click on "Start" to become counter down. When stopped, please observe the status of distilled water level window, if it doesn't arrive at level 4.5, please add cooling fluid again until the level is above 4.5 ,then take off the funnel. Note Add about 1L distilled water or deionized, change the water after one week. When could not add into the distilled water, please open the distilled water discharge valve[5], Add the distilled water and observe the valve. when the liquid is smooth outflow, blocked it and continue to fill... If do not use the apparatus 15 days or above, we are recommended to put the distilled water clean and clear.

We, Sparkweld Engineering, Mumbai, are manufacturer and supplier of world class Utensil Stud Welder (Pan Welding Machine). With the diverse application in its portfolio, Pan Welding Machine serves the variety of kitchenware manufacturer in India. The main feature is excellent aesthetic in welding. Pan Welding Machine serves simple as well as a complex application so won the trust of kitchenware manufacturer as they want the latest technology to create best and innovative products. Our specialized Pan Welding Machine efficiently serve the vast diversity of kitchenware which is key to growth and profitability of every manufacturer. Features: Excellent aesthetic in welding. Fully pneumatic control and pneumatic lift facility. Easily adjustable height. Robust and lightweight. Aluminium construction to restrict magnetic influence. Different angle adjustment on welding head and pan bolster for angled welder fixings. Adjustable air control and interchangeable bolster arrangement. For the correct stud position on pan wall, linear movement of the front plate is provided. Specifications: Brand: Sparkweld Engineers. Product Code: SE-06. Type: Stored Energy Discharge. Welding Head Operation: Pneumatic. Welding Head: Initial Contact Type. Stud Range: Up to 10mm square aluminium. Base Material:1.2mm and above. Gas: Argon 99%. Input Supply Voltage: 240v,A.C.,10Amp. Charging Voltage:60 to 180 volts, D.C., Stepless.

Suitable for center and side stitching Run on single face motor Estimated life 25 years 2 Pages can be stitched All Spares available readily form ready stock Most dependable and reliable machine available in the market

• Dimensions: 12in. H x 12in. W x 13in. D (30 cm x 30 cm x 33 cm)
• Weight:: 6 kg.
• Stitch Length:: 3.5 Stitches / Inch (25.4mm) Fixed

We are reckoned as one of the prominent Bag Closer Machine Manufacturers in Punjab. The Portable Bag Closer Machines, offered by us, are ideally designed for closing of HDPEPP, Jute, paper, textile bags etc. that are used as packaging material for chemicals, flour, fertilizers, animal-feed, food grains, food products etc. the Bag Closer Machines are also available in models with single as well as double stitch and also an optional oil pump system. Moreover, the unmatched quality and unsurpassable performance has attracted various national as well as international clients to place repeated orders for the Bag Closer Sewing Machines.

• Country of Origin: India
• Type: Portable
• Certification: ISI Certified
• Color: Available in Many Colors
• Automatic Grade: Manual
• Warranty: 1 Year
• Material: Stainless Steel

Largest Size of Book :420 X 250 mm (16 12" X 97 8"), Smallest Size of Book :115 X 100 mm (4 12" X 37 8"), Nett Weight approx:675 KGs., Gross Weight approx:910 KGs., Speed:up to 70 sections per minutes, Motor:0.37 kw (12 HP), 1400 RPM, Space Required:approx. 1.5 X 1.4 m3 (5' X 4.7"), Shipping Space:approx. 2.1 m3 (2.6 cbc yards).

• PACKING SIZE (mm): 454 x 345 x 475
• RPM MOTOR SPEED: 7000

This machine is high speed, low noise,small start up movement,beautifully shape,simple & easy to operate machine, It is applicable to whipstitch operation of trousers,pajamas,shirt & sportswear.

• Machine Type: Automatic
• Brand Name: Juki
• Minimum Order Quantity: 1 Set

Shear Line takes today's technology to it's heights by creating the right machine for today's corrugators - Super Shear Cut Semi - Automatic Flat Bed Die Cutter. This machine is an evolution that has been triggered by the needs of the industry for a flat bed die cutter that is perfect in every aspect - offering benefits to the corrugators that hitherto were not possible.

Zig Zag sewing machine Electric Sewing Machine with 22-Stitch Patterns including 4-step Buttonhole.Zig Zag sewing machine

• Automation Grade: Semi-Automatic
• Rated Power: 1600W
• Capacity: 3mm to 30mm
• Model Name/Number: 700027
• Brand: Vmax
• Plate Thickness Range: 3mm to 30mm
• Motor Voltage: 415V
• Product Code: 700027

Automation is a must for all industries today. Increasing competition calls for more and more automation in fabrication industries where metal cutting and welding is involved. There is hardly any application which is not possible to automate technically. The quality, speed, consistency and economy is possible only with automation. The basic building block for automation in industrial application is motion control. Addition of vision technology has widened the area of application.

• Type: Sewing Thread Winding Machine
• Color: Brown, Grey, Light White
• Voltage: 110V, 220V, 280V
• Condition: New
• Application: Sewing Thread Winding
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Warranty: 1year

Industrial Sewing Machines, industrial sewing machine parts

Industrial Sewing Machine

End Mill Cutter, Profile Cutter, V Sharpening, Single Flute Cutter

Welding Machine, Plastic Moulds, Rubber Moulds, auto mobiles plastic

Welding Machine, Cutting Saw, Drilling Bits, Gear Box, Grinding Machine

Automatic Roll Fed, Flat Bed Die Cutting Machine

Sewing Machine

Sewing Machine, Industrial Sewing Machine

Welding Machine, cable socket, Panel Accessories

end cutter, diamond needle file, Reusable Curved Bone Scrapers Blade

riccar sewing machine, Industrial Sewing Machines, Knitting Machine

end cutter, pressure foot, Rotary Hook And Shuttle Hook, Knitting Machine

Welding Machine, Lathe Machine, Milling Machine, Power Presses

Flat Bed Die Cutting Machine