ShriRam Engineering Industries Sakinaka, Mumbai, Maharashtra

We are manufacturing water cool moulds for casting round billets of copper & brass. Our liners are centrifugally casted; the id is grinded to achieve a smooth surface for the billet.Our moulds are specially designed as the water flow inside keeps the liner cool and the billets are casted properly. We also have an additional feature of safety disc in our moulds, to avoid any accidents due to inside pressure. Mould would consist of M.S. Jacket accommodating centrifugally cast, heat resisting C.I. Liner, fully free to expand laterally & dimensionally under heat. • Effective water cooling & heat exchange. • Provision of safety disc in case pressure builds up in the jacket.• Mould mounting to be vertical.• Effective & easy mould sealing at the bottom of mould.• Consistent water circulation, Cleaning & Lubrication of mould Liner will go a long way in MOULD LINER LIFE

The stopper mechanism equipment corresponds to the high requirements of an exact control of steel flow in a continuous casting machine.The robust and rigid design with is precise and adjustable guiding result in exact movements and easy handling.Fast and simple mounting to the tundish is enabled by the compact design. The unit is fitted as well as for automatic drive with a hydraulic or electromechnic quick-change actuator and for manual operating.The stopper rod mechanism is also designed for low maintenance and for continuous operation in a modern casting machine. This mechanism can be availed from us as per the specifications sent by our clients.

Stator / Rotor Guides are used for armature winding in the production of electric motors. Whilst similar to wire guides in their function, the production machining techniques and designing of these guides is particularly specialized.We work consultatively with our clients to help them achieve their motor winding possibilities by providing bespoke designs of stator / rotor guide according to the style of winding, type of machine in use, size of laminations, and type of motor being wound.

A Pusher is manufactured from heavy duty pipe. The thumbs welded on the pipe are all in water level with respect to the centre of pipe. There is continuous water flow when the Thumbs are welded to pipe, the water flow helps in avoiding distortion of the pipe, due to heat of welding. The use of PUSHER FRAME is to transfer the billets from the DISCHARGE ROLLER TABLE to COOLING BEDS.Heavy duty steel fabricated frameUse of precision engineered componentsSuperior performance in specific rolling mill applications

Our Injection Molding machine is specially designed as the water flow inside keeps the liner cool and the billets are casted properly

A process and apparatus for starting a continuous casting plant, which involves the filling of the empty area over the dummy bar of an ingot mold to the desired filling level, is simplified while achieving improved operating safety.Heavy duty steel fabricated frameSupreme strengthSuperior performance in specific rolling mill applicatio

Pre- Cut Off Roller Table & Discharge Roller Table < CONVEYOR SYSTEM > .They are used for carrying billets, once they are been cut by the Auto Torch Machine.Low cost,High accuracyHigh load capacity

Our Carbon Injector has been designed to sustain the specific flow-rates required by the different lancing methods in use.Carbon fines is filled from the top to the vessel with the help of a filling valve (Ball valve) and a small receiving-hopper with air-vibrator.The filling process is controlled by the load-cell & weight-indicator. At the bottom of the vessel, there is a fluidization cone with Horizontal rotary feeder which feeds the carbon at the controlled rate to the pipe-line going to the carbon-lance through solenoid-operated pneumatic-valve.It gives better control on feeding rate and better life of feeder also.Our Carbon Injector consists of following components:• Safety Relief valve angle pattern spring loaded with screwed cap• Feed wheel (Polyurethane rubber rotor)• Essenpro Make Helical Geared Motor, Horizontal type, Model HGM/63-100L4, Complete with Flange Mounting of 2.2KW TEFC squirrel cage Induction Motor (BBL/CGL Make only), suitable for operation on 415 ± 10% Volts, 3 Phase, 50 c/s ± 5% supply with ambient temperature of 450C, "F" Class Insulation with temperature rise restricted to "B" Class, conforming to IS-325, IP-55 protection, having final output speed of 35.5 service factor of > 1.5.• Abcoflex S.S. Corrugated hose with S.S. branding fitted at both ends with M S stub end flanges as per ASA 150 standard.• 2" Moisture Separator with vertical Flange End• 2" BSP(F) Pressure Regulator along with Pressure Gauge -Pressure range - 0 to 10kg/cm2• Load Cells, Sensortronics Make – Model 65023 Capacity – 1800 kgs with Mounting Kit• Signal Transmitter• Local Control Box with Electric Hooter/Siren• 50 NB Ball Valve with Actuator and Solenoid Valve• 1 ¼ "Ball valve with Actuator and Solenoid Valve• 2" Manual Ball Valve• ½" Manual Ball Valve• 8” Butterfly Valve with Actuator Solenoid Valve and limit switch• 1¼" Manual Ball Valve• 2" Rubber hose and pneumatic Hose• 2" Cam lock Coupling

Billet Shear Machines manufactured by us Offer High Strength , Stable performance , Easy Operations and Convenience for  Maintenance.Our Shearing machine differs from the regular robust Old Time Equipments , Ours is more of Simple design aesthetically far more better and easy to Understand the Operations for the Operator using the Machine.Additional Features such as Limit Switch for Cutting the HOT Rolled Billet and Overload Protection switch adds to the reliability of the machine.BILLET SHEARING MACHINE used in continuous casting equipments is a  new Revolution catching up very fast. 

It is during the torch cutting stage of the casting process that the instantly disclosed method contributes to the efficiency of the process and the quality of the finished product. Near the end of the casting process, the slab, bloom or billet is cooled, straightened and transferred on roller tables to a cut-off machine, which cuts the product into ordered lengths. This cutting is typically affected by torches.

In the continuous casting process, pictured below, molten steel flows from a ladle, through a tundish into the mold.

SREI manufacture an extensive range of foundry ladles that are suitable for all types of metal handling requirements. The ladles can be supplied as either standard configuration or custom designed to incorporate your special requirements

We manufacture lifting bail arms for made from precision raw material. Having wide usage in steel & foundry industry they are basically made from iron.

A Tundish is a receptacle used in metal foundries to hold molten metal, typically in a continuous casting process. It can also be used in filling molds.

Tundish Car allows a reservoir of metal to feed the casting machine while ladles are switched, thus acting as a buffer of hot metal, as well as smoothing out flow, regulating metal feed to the moulds and cleaning the metal.

electric arc furnaces are filled from the top to the vessel with the help of a filling valve (Ball valve) and a small receiving-hopper with air-vibrator.