Signal Isolators Dealers in Mumbai

• Conversion Accuracy: 0.25%
• Input: 4-20mA
• Output: 4-20mA

nippon ISOXR Series is high performance Signal Isolators. The signal Isolators provides excellent isolation between Input & output Signals. This provides noise free isolated signal to the system with accurate conversion fact nippon ISOXR Isolators are housed in ABS molded din rail enclosures. Once again the indigenous R &D offers cost effective solution Application: A/D and D/A conversion Data Transmission Transducer Interface System Isolation DCS, SCADA, Data Aquisition PLC, AC drives Industrial Process C

Canopus Instruments is one of the top manufacturers and suppliers of signal isolators. We provide top quality signal isolators which provides exceptional isolation.

Quality measurement and good equipment are very important parameter to achive Signal integrity. However, even with the best equipment, signals can be of inferior quality if the equipment is not properly installed or it is not protected by signal isolators / signal conditioners. Radix design competency in signal isolation is one of the finest to be found. Radix signal isolators are an outstanding combination of accuracy, frequency response and signal handling. Choose from loop-powered isolators which require no external power supply and have very low loop drops, 3-port signal isolators which not only isolate input signals, but also act as signal multipliers and multiply signals to send to multple field instruments. Some of our signal isolators are HART compatible for effortless two-way field communication, that is achieved through superimposition of digital communication on top of the 4-20 mA signal. Signal isolation devices are use to eliminate ground loop errors caused by noise (ground) and other such signal interference problems.  Signal isolators use one of many electronic methods to interrupt the connections between two grounds while passing the correct signal with little or no loss of accuracy. Without a way for ground currents to flow, these currents can't induce signal errors caused by ground noise.    

Libratherm Instruments AC / DC Signal Convertor cum Isolator (Model : ISM-10) is designed in 35 mm. DIN Rail compatible modules. These modules accepts DC input signal of (4-20)mA, (0-20)mA, (0-50)mA, (1-5)V, (0-5)V or (0-10)V or from the Thermocouple or RTD Sensors or from the load cell, pH, ORP, conductivity sensors etc.. It also accepts AC variable voltage of (0-110 V)/(0- 230 V) or AC current of (0-5)A or (0-1) A from external CT and provides optically isolated output in the form of (4-20)mA or (0-5)V or (0-10)V. Both the input and output levels have their grounds optically / galvanically isolated. Thus the process signals received from the Transducers or transmitters or Sensors can be directly connected through ISM-10 to the PLC, DCS, SCADA etc.. without any ground line interference. The ZERO and SPAN presets are accessible to the user for on site calibration. These modules operates on 230 VAC / 110 VAC or 24VDC supply. The module with single input and multiple parallel outputs can also be provided to meet the control system requirement. These modules are rugged, reliable, field proven and economically priced.Applications :Interface low-level signals coming from the sensors or transducers from the plant to DCS, SCADA, PLC or PID process controllers without ground line interferences.

• Temp.: 0-55°C
• Output: 4 – 20mADC (2 -Wire Loop Powered)
• Input: 4 – 20mADC (4-Wire) Loop powered input circuit

The input 4-20mA Signal from a transmitter is measured and converted into isolated 4-20mA Output signal which is exact replica of the input signal. The Circuit on the input side draws power from the 4-20mA input being measured and the output circuit draws power from the 4-20mA 2-wire Output connection. Thus no separate external power supply is needed for the unit. Optical Isolation is provided internally to isolate the input and output signals.

• Usage/Application: Signal Isolation
• Color: Black
• Brand Name: Startech
• Input Voltage: 1v p-p
• Mounting Type: Horizontal
• Output Voltage: 1v p-p

Signal Converter / Isolator

Signal Isolators, power transducers, embedded systems, Digital Meters

Signal Isolators, Industrial Gauges, optical scanners

We offer Signal Isolators. Signal Isolators

mobile phone signal isolator, Samsung Mobile Battery

Signal Isolators, relay test kit, Plating Rectifiers, timer relays

signal converter, five channel buffer amplifier

DC Signal Converter & Isolator -7.6mm Ultra Slim, Gsm Module

electronic process control instrument, Temperature Controllers

Signal Isolators, Venturi Tubes, Orifice Plate Assembly

Signal Isolators, Current Monitoring Relays, Two Channel Temperature Scanner