Slewing Bearing Dealers in Mumbai

Design of the support structure the slewing ring has a limited axial stiffness: the diameter is large compared to the cross section. It must be mounted on a machined supporting base, ensuring sufficient stiffness with regard to the loads to be transferred. This makes it possible to ensure an even distribution of stresses and to avoid any deformation during operation, which would be harmful to the good working of the bearing. Therefore, it is necessary to use supporting bases with a minimum thickness not less than the values indicated in the table above. The width of the supporting surfaces is to be at the least equal to that of the ring.

• Brand Name: ROTHE ERDE AND ROLLIX
• Shape: Round
• Condition: New
• Usage: Industrial

We are offering slewing ring bearing from Reputed European manufacturers.

Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing (fig. 1), which can be caused, for example, by shaft deflection.

• Brand Name: JVN
• Outside Diameter: 280 - 4726 mm
• Place of Origin: Maharashtra, India
• Feature: Cross Roller & Four Point Contact
• Lead Time: 30-45 days
• Port: Nhava Sheva
• Seals Type: None

We are one of the leading suppliers of Slewing Ring Bearings that is available in ball and roller types. These bearings are extensively used where a rotary motion is required without transmission of high radial load, rotation at slow speed and little rough application. The Ball Type has double row ball bearing slewing rings with double axis system and single row ball bearing slewing ring with four-point contact. In case of the Roller Bearing design, three roller bearing slewing rings with radial & axial roller type are applied. We can provide our clients with wide range, having up to 3500 mms external diameter with either internal teeth or external teeth cut or without any teeth. For pre-lubricated condition with grease nipples, high quality dust seals and standardized clamping bolt pattern the complete bearing is provided. These bearings give a normal life of 30000 revolutions on load. The selection of type of rolling element either roller or ball and the number of rows, entirely depends on application and method of use, such as slewing over angle, operating cycle and oscillatory motion. Our Slewing Bearing Rings find wide application in wind turbine, turntable, mobile carne, excavator, port carne, turn dish rotation in steel industry and work platform.Features:- High operational efficiency- Compact design- Long service life- Low maintenance

Slewing Bearings are Large-size rolling bearings which can accommodate axial, radial and moment loads either single or in combination direction. They can perform both movements oscillating as well as rotational. Basically a slewing bearing consists of inner ring, outer ring and rolling elements – balls or cylindrical rollers. The rolling elements are separated by polyamide spacers. The rings, which usually incorporates a gear are provided with holes to accommodate attachment bolts. The holes may be threaded. Generally, only the raceways in the rings are hardened and precision finish. Integral seals keeps the lubricant in, and contaminants out of the bearing. Slewing bearings are re-lubricated through grease fittings to reduce maintenance and operating costs.

Design of the support structure the slewing ring has a limited axial stiffness: the diameter is large compared to the cross section. It must be mounted on a machined supporting base, ensuring sufficient stiffness with regard to the loads to be transferred. This makes it possible to ensure an even distribution of stresses and to avoid any deformation during operation, which would be harmful to the good working of the bearing. Therefore, it is necessary to use supporting bases with a minimum thickness not less than the values indicated in the table above. The width of the supporting surfaces is to be at the least equal to that of the ring.

NIBL is the exclusive distributor for Rollix slewing bearings in India. Rollix, part of the Defontaine group, is one of the oldest manufacturers of slewing rings in Europe with an experience that spans half a century. Rollix slewing high precision bearings unique design have a special coating which offers long life with very little maintenance. These bearings have a compact design and are able to accomodate both; radial and axial loads. Rollix slewing rings can also accomodate tilting movements.

Slewing Bearings, Mounted Points, Spherical Roller Thrust Bearing

We are Importers and supplier of a wide range of Slewing Bearing. These support a heavy but slow-turning or slow-oscillating load and are very durable. We also customize these as per the specifications required by our esteemed customers. Moreover, we assure timely delivery of our products. Features: Best quality Reliable Fine finish

Slewing Bearings, Spindles, Thrust Roller Bearings

Slewing Bearings, Deep Groove Ball Bearings, Angular Contact Ball Bearings

Slewing Bearings, Precision Cylindrical Roller Bearing, Tensioner Bearings

Slewing Bearing, industrial roller bearings, NSK ABC Bearings

thin section bearing, generator bearing, Barrel Roller Bearings

Slewing Bearing, Bearing Cages, Track Roller, Ball Cage, Needle Rollers