Socket Screw Dealers in Kumbharwada, Mumbai

• Size: All Sizes
• Type: Threaded
• Brand Name: Skyland
• Material: Stainless Steel
• Grade: SS Fastener Allen Socket Head Bolt Screw DIN7991 A470 A480
• Grade: ASTM
• CNC Machining or Not: YES
• Material Capabilities: YES
• Micro Machining or Not: YES
• Model Number: Skyland
• Place of Origin: India

• Material: Stainless Steel, Mild Steel
• Diameter: 1-5mm, 10-15mm, 15-20mm
• Thickness: Dacromet, Hot Dip Galvanizing, Phosphated
• Certification: CE Certified, ISO 9001:2008
• Length: 0-25mm, 25-50mm, 50-75mm
• Application: Industrial
• Color: Silver
• Condition: New
• Surface Finishing: Polished
• Country of Origin: India
• Features: High Efficiency, Durability, Optimal Performance
• Colour: Silver & Gray
• Feature: Rust Proof
• Usage: Home, Office, Industrial etc.
• Weight: 100 gm to 2 kg

• diameters up to: 19.05 mm (0.75 in)
• Material : Stainless steel
• Advantages: environment friendly, corrosion resistant, resistant to high temperatures and cold temperatures, long life cycle, 100% recyclable

We Are the manufacturer of Stainless Steel Socket Head Screw.  

• Material: Carbon Steel, Stainless Steel
• Application: Fittings
• Color: Silver
• Surface Finishing: Polished
• Standard: AISI, ASTM, DIN
• Type: Allen Cap, Allen CSK, Button Head, Allen Grub

• MATRIAL: STAINLESS STEEL 304,304L, 316, 316L,317L,309,310,904L, SUS-630, UB-6,B8,B7,

    DIN 7991 - FLAT SOCKET HEAD CAP SCREWS SPECIFICATIONS  

hex socket cap screw the thread length equals the screw length, and the Screw can be installed all the way into a threaded hole. Equally, partially threaded set Screw have an unthreaded portion under the head and consequently, the thread length varies. Since the unthreaded portion of the screw is stronger than the eased section, partly threaded set Screw possess more holding power when force is useful from the side.

• Size: M3 TO M52
• Material: Stainless Steel
• Type: Socket Head Screws
• Thread Type: Full Thread
• Material Grade: SS 304
• I Deal In: New Only

We are ranked among well-known Exporters & Suppliers of precision engineered Socket Head Cap Screws. Sourced from leading OEMs, our entire range of Socket Head Cap Screws is reliable and retains its physical properties even during extreme situations. Buyers can purchase Socket Head Cap Screws from us in varied specifications as per requirements. We price them economically and provide them in bulk even at short notice.

• Size: Standard
• Type: Hexagon Socket Head Cap Screw
• Material: Alumunium, Bronze, Carbon Steel, Iron, Stainless Steel
• Diameter: ABOVE 2MM TO ANY REQUIRE SIZE
• Application: Industrial
• Color: Silver
• Grade: AISI, DIN, GB
• Surface: Black Oxide, Bright Nickel, Galvanized, Polished, White Nickel Plated, Zinc Plated
• Thread: Coarse, Full Thread, High Resistance, ISO Metric, Half Thread
• Country of Origin: India

We are professionals owned company that specializes in the manufacturers and suppliers of quality Socket Cap Screws throughout India and to overseas market. Socket Cap Screws are engineered metal products being used by engineers for various process equipments.

• Grade: DIN, ASTM, BS and all International Standards
• Length: 3 mm to 200 mm, Custom Sizes
• Size: M3 - M56 , 3/6" to 2", Custom Sizes
• Tolerance: +/-0.01mm to +/-0.05mm
• Material Grade: Stainless Steel 310 ,316,317,347
• Packing: Canton, pallet, Small Boxs or customer request

• Type: Socket Screw
• Material: Alumunium, Bronze, Carbon Steel, Iron
• Length: 0-25mm, 25-50mm, 50-75mm, 75-100mm
• Application: Fittings, Wall Use, Wooden Racks
• Color: Black-grey, Dark-grey, Grey, Smoke-grey
• Surface Finishing: Black Oxide, Bright Nickel, Galvanized, Polished, White Nickel Plated, Zinc Plated

• Material: Made from alloy steel with a chemical composition of: 0.28 to 0.50% Carbon, 0.040% (max) Phosphorus, and 0.045% (max) Sulfer. Also, chromium, nickel, molybdenum or vanadium should be present in a quantity sufficient to meet the strength requirements outli
•  : Cup Point
• Half-Dog Point: Oval Point
• Flat Point: Cone Point
• Description: Fully threaded, headless screw with a hexagonal drive at one end and a cup-shaped indentation at the other.
• Fully-threaded, headless screw with a hex drive at one end and a protruding tip with a flat surface at the opposing end.: Posseses an oval-shaped point on the end opposing the flush hex drive.
• Posseses a flat surface at the end opposing the hexagoal drive. :  Has a shart conical-shaped point at the opposite end from the hexagonal drive.
• Applications/ Advantages: Most used style Designed for fast, permanent and semi-permanent location of parts on shafts with a hardness differential of 10-15 Rockwell C points and where cutting in of the cup edge on the shaft is acceptable.
•  For permanent setting - often used instead of a dowel pin. The point should closely fit the diameter of the drilled hole, or alternatively, against the flat.: The preferred style for frequent re-set on soft or hard shafts with minimum deforming. Often used for permanent setting on shafts that are spotted, splined or grooved, and for applications where the point meets the shaft on an angle. Sometimes sub
•  Designed for frequent re-setting or re-locating on hard steel shafts and where minimal damage is shafts is essential. Ground flats on the shaft improves the contacts.: Designed for permanent setting on soft or hardened shafts. Deep penetration gives this style of screw the highest torsional and axial holding power. Can be used as a hangar or pivot. For shafts of Rockwell hardness C15 or more, spot point half
• Heat Treatment: Set screws should be heat treated via oil quenching from above the transformation temperature and then tempered at a temperature that is condusive to meeting the hardness requirements.
• Hardness: Rockwell C45 - 53
• Torsional Strength: Socket set screws of sufficient length should be tested to determine if that can withstand the application of the test torque outlined in the above table without evidence of the socket reaming or the screw bursting.
• Finish: Black Thermal Finish

Carbon Steel, Stainless Steel, Low Temperature Carbon Steel, Alloy Steel, Steam Boiler Quality, Plus "Exotic" Materials I.E Various Grades Nickel, Monel, Incoloy, Hastelloy, Inconel, Cupronickel & Titanium. MATERIALS GRADES / STANDARD / SPECIFICATION : Stainless Steel: AISI 302, 304, 304L,316, 316L, 310, 410, 420 Etc. : 4.6 , 5.6, 6.6, 8.8, 10.9 & 12.9 / 'R', 'S', 'T' Conditions. Carbon Steel: Hot Deep Galvanized, Bloodied, Nickel Chrome Plated, Etc. Alloy Steel: Bare Condition, Galvanized, Phosphetised, Cadium Plated. OTHERS : Monel, Nickel, Inconel, Hastalloy, Copper, Brass, Bronze, Titanium, Tantalum, Bismuth, Aluminum, High Speed Steel, Zinc, Lead, etc. DIMENSIONS : DIN, ANSI, AISI, ASTM, JIS, BS, GOST, IS & SPECALIST IN DRAWING BASED FASTENERS

We offer socket head allen cap screws.304 (b8), 316 (b8m), 316 l, 316 ti, 317 l, 310, 321h (b8t), 347h (b8c), ss 410 (b6), 904 l(ub6), a453 gr660 abc & d.

When it comes to Socket Head Shoulder Screws we are one of the leading players in the market. Our products are manufactured using the most modern manufacturing practices and also using the best grade of raw materials. It has been made keeping in mind the customer requirements. It comes in a wide array sizes for a multitude of applications. It is placed at a strategic price point. Feel free to contact us if you have any queries.

We are well known for supplying of wide variety of Socket Screw.

• Material: Stainless Steel, Low carbon steel, Alloy carbon steel
• Length: 3 mm to 200 mm

Cap Screws (Flat Head Cap,Socket Cap, Hex Cap, Button Head Cap) available in a variety or grades, materials, and finishes, in metric and inch sizes for export. We are a family owned, full line fastener distributor specializing in stainless steel screw for companies involved in Equipment Manufacturing, Mining, Oil Refineries, Chemical manufacturing,

Socket set screws are securing a pulley or gear to a shaft. Set screws are usually headless (also called blind), meaning that the screw is fully threaded and has no head projecting past the major diameter of the screw thread.

socket screw, steel nickel alloys, Steel Round Bars, steel screwed

• Size: Multisizes
• Material: Alumunium, Carbon Steel
• Diameter: 15-20mm
• Certification: CE Certified
• Length: 1-10mm, 20-30mm
• Application: Industrial
• Color: Black

Divya Darshan Metallica offers a high quality Socket Head Cap Screws that are available in various specifications. Socket Head Cap Screws are all about clearance. Socket head cap screws are the best choice for applications with limited installation access or clearance.

Duplex Steel Socket Cap Head Screws (Allen Head Bolt) CSK - Fastener

socket screw, Stainless Steel Sheet, Welded Tubes, Hex Screws

Abrasion Resistant Steel Plate, Steel Coil, Steel Pipe Fitting

hexagon socket countersunk screw, socket set screws, hext nut, flang nut

We are pleased to provide different types of socket head cap screws in india.

Hexagon Head Screws, hexagonal screw, Hexagon Socket Head Cap Screw