Socket Weld Fittings Dealers in Sion, Mumbai

Carbon Steel Socket flanges are being made of carbon steel metals i.e. carbon steel plates and or forgeable solid bars. These flanges are exclusively designed for the purpose of welding the flanges to the subject. For example it will be welded to the end of pipes and not screwed up to pipe as it don't have threaded in it's inner diameter. In other words the internal diameter of these carbon steel socket weld flanges are not through, there is step in it's inner diameter with suitable dimensions to it's pipe to be fitted with.   Carbon steel Socket Weld flanges were initially developed for use on small-size high pressure piping. These flanges static strength is equal to Carbon steel Slip On flanges, but their fatigue strength 50% greater than double-welded Carbon steel Slip On flanges. The connection with the pipe is done with 1 fillet weld, at the outside of the Carbon steel flange. But before welding, a space must be created between Carbon steel flange or fitting and Carbon steel pipe. ASME B31.1 1998 127.3 Preparation for Welding (E) Socket Weld Assembly clearly indicates thatin assembly of the joint before welding, the pipe or tube shall be inserted into the socket slot of these Carbon steel flange to the maximum depth and then withdrawn approximately 1/16" (1.6 mm) away from contact between the end of the pipe and the shoulder of the socket of this Carbon steel flange.The purpose for the bottoming clearance in a Socket Welding is usually to minimize the residual stress at the root of the weld that could occur during welding operation of the weld metal. The below mentioned image shows you the X measure for the expansion gap for Carbon steel socket weld flange. Dimensions and weight of Carbon Steel Socket Weld Flanges size and pressure ratings   From 1/2" NB ( 15 NB) to 24" NB (600 NB) and pressure rating from 150 pound / class to 2500 pound / class. Find complete detailed dimensions of all these carbon steel forged flanges here as following. ANSI B 16.5 Class 150 Carbon Steel Socket Weld Forged Flanges Dimensions ANSI B 16.5 Class 300 Carbon Steel Socket Weld Forged Flanges Dimensions ANSI B 16.5 Class 400 Carbon Steel Socket Weld Forged Flanges Dimensions ANSI B 16.5 Class 600 Carbon Steel Socket Weld Forged Flanges Dimensions ANSI B 16.5 Class 900 Carbon Steel Socket Weld Forged Flanges Dimensions ANSI B 16.5 Class 1500 Carbon Steel Socket Weld Forged Flanges Dimensions   Technical Standards Applicable for Carbon Steel Socket weld forged Flanges DIN Flanges | ANSI Flanges | BS Flanges | ISI Standard Flanges | ISO Standard Flanges | ASME Flanges | PN Flanges | Table Flanges |   Application of Carbon Steel Socket Weld flanges   Oil and Gas IndustriesWater and Waste water treatment PlantsShip building IndustriesMarine IndustriesOffshore Industries  

For our valued customers, we have brought forward Socket Pipe Fittings under the huge assortment of industrial products. Designed and developed using advanced technology, these products are available in various sizes. Features: Durability Compact designs Reliable performance   Additional Information: Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other

Duplex steel Tee makes 90 degree branch connection from the main running pipe. Normally these tee make same size branch connection as what is the size of run pipe butt it can be lesser than the run pipe line as well if required.  

• Sizes: 1/8” to 1” OD (Suitable for Tube End) 4mm to 25mm OD (Suitable for Tube End)
• M.O.C: SS304, SS316, Brass.
• End Connections: NPT / BSP / BSPT / UNF
• Rating: 1500, 3000, 6000, PSI.

JYOTI METAL CORPORATION has designed a range of heavy duty tube fittings in a variety of materials to provide secure zero leak joints on thin or thick wall tubes. Available in Metric outside diameters ranging from 6 to 50 mm. Series of ferrule design include single or twin ferrule in stainless steel, olive shaped single ferrule or twin ferrule in brass and single ferrule bite or progressive type in carbon steel. Use :Bronze : Long life protection against sea water corrosion and hostile marine environment. Carbon Steel : High pressure hydraulic applications. Brass :Pneumatic, high pressure water and steam lines. Maximum Working Pressure : 6000 PSI (400 bar) in Carbon Steel 4000 PSI (300 bar) in Brass

• STANDARD :: ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE  
• GRADES :: SS 304 / SS 316 / SS 317 / SS 347 / SS 304L / SS 316  
• SIZE :: ½" to 4"

Socket welding flange, a popular type of pipe flange, was initially developed for use on small-sized high- pressure piping. The fabrication of this type of flange is similar to that of a slip-on flange. However, the internal pocket of a socket weld flange allows for a smooth bore and better fluid flow. When provided with an internal weld, the static strength of this flange is equal to slip-on flange, but the fatigue strength is 50% greater than double welding slip-on flanges. Smooth bore conditions in such a flange can easily be attained without having to bevel the flange face and, after welding, to reface the socket weld flange as would be required with slip-on flanges. For this reason, the internally welded flange is popular in chemical process piping. The Socket weld Flanges is similar to a slip-on flange, except that it has a bore and a counter bore. These act as a socket, holding the pipe in place before welding, hence the name. The counter bore is slightly larger than the OD of the matching pipe, allowing the pipe to be inserted into the flange, while the diameter of the smaller bore is the same as the ID of the matching pipe. This difference in bore size acts only as a restriction to the depth insertion of the pipe, and therefore eliminates any restriction in flow.

• Stainless Steel Orifice Weld Neck Flange: Carbon Steel Orifice Weld Neck Flange
• Alloy Steel Orifice Weld Neck Flange: Duplex Steel Orifice Weld Neck Flange
• Super Duplex Orifice Weld Neck Flange: Alloy 20 Orifice Weld Neck Flange
• SS 904L Orifice Weld Neck Flange: Inconel ® Orifice Weld Neck Flange
• Monel ® Orifice Weld Neck Flange: Incoloy ® Orifice Weld Neck Flange
• Hastalloy ® Orifice Weld Neck Flange: SS 310S Orifice Weld Neck Flange
• SS 317L Orifice Weld Neck Flange: SS 321H Orifice Weld Neck Flange

Stainless steel forged socket weld & screwed fittings & flanges for high temperature services as per astmasme sa 182 – gr. F304l, 304h, 304ln, 309, 309s, 309h, 310s, 310h, 316, 316l, 316h, 316ln, 317, 317l, 321, 321h, 347, 347h, 348, 348h etc. duplex forged socket weld & screwed fittings and flanges as per astmasme sa 182 uns no: s31803 (f51), s32750 (f53) & s32205 (f60). alloy steel forged socket weld & screwed fittings & flanges for high temperature services as per astmasme sa 182 – gr. F1, f2, f5, f9, f11, f12, f22 & f91. Alloy steel & carbon steel forged socket weld & screwed fittings and flanges for high pressure transmission service as per astmasme sa 694 gr. F42, f46, f48, f50, f52, f56, f60, f65 & f70. carbon steel forged socket weld & screwed fittings and flanges for elevated temperature services as per astmasme sa 105. Carbon steel fittings for high pressure transmission services as per astmasme sa 694 – gr. F42, f46, f48, f50, f52, f56, f60, 65 & 70. Carbon steel forged socket weld & screwed fittings and flanges for low temperature services as per astmasme sa 350 – gr. Lf1, lf2, lf3, lf5, lf6 & lf9. Nickel alloys forged socket weld & screwed fittings and flanges as per astmasme sb 564 uns no: n04400 (monel 400), n06600 (inconel 600), n08800 (inconel 800), n06625 (inconel 625), n08825 (inconel 825), n10276 (hastalloy c 276) & n02200 (nickel 200). Nickel-alloy socket weld & screwed fittings and flanges as per astmasme sb 462 uns no: n08020 (alloy 20 20 cb 3).

We are offering socket weld. Stainless steel: astm a182 f304 304l 304h 316 316l 317 317l 321 310 347 904l etc. Carbon steel: astm a105 a105n a694 f42465256606570 a350 lf3 a350 lf2, etc. Alloy steel: astm a182 f1 f5 f9 f11 f22 f91 etc. Types : elbow, tee, union, cross, coupling, cap, bushing , plug, swage nipple, welding boss, hexagon nipple, barrel nipple, welding nipple, parraler nipple, street elbow, hexagon nut, hose nipple, bend, adapter, insert, cross, weldolet, sockolet, thredolet, etc.

We are manufacturing monel socket weld flanges in all types or designs as per international standards and norms.

Stainless Steel Socket welding Flanges which is renowned for high end features such as durability and reliability, these socket welding flanges results in smooth & flawless performance. They are corrosion resistant and promises high utility. All the products are widely appreciated by our clients and are available at highly competitive prices.

• Type: Socket Weld Fittings & Screwed-Threaded NPT, BSP, BSPT Fittings
• Size: 1/4" NB TO 4" NB
• Standards: ASTM A182, ASTM SA182
• Dimension: ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799
• Class: 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
• Form: Couplings, Full Couplings, Half Couplings, Reducing Couplings

• Material: Metal
• Shape: Round
• Application: Industrial Fitting
• Feature: Excellent Quality, Fine Finishing, High Strength
• Finishing: Polished
• Color: Silver

Socket weld flanges is a device that is welded to the end of pipe so that the pipe can be bolted to another pipe with a similar flange. Socket weld flanges enable a pipe to be disconnected and reconnected with ease. Available in a spectrum of shape and sizes, our forged light weight weld flanges are manufactured using superior grade material such as stainless steel, carbon steel and known for their durability and performance.Socket Weld Flanges available as per the following specifications :Grades :ASTM/ ASME SA 790 UNS no s 31803, s 32205, s 32550, s 32750, s 32760

• Type: Socket Weld
• Material: Metal
• Shape: Round
• Thickness: 10-20mm
• Certification: ISI Certified
• Application: Pipe Fitting
• Color: Grey
• Finishing: Polished

ASTM A182 3000 lbs ASME B16.11 / BS 3799   Product code example: FSCAP-316L-1-3000   ● = stock standard