Solar Modules Dealers in Mumbai

We offer a wide range of Solar Modules in the market. The Solar Modules made accessible by us are energy efficient and work on solar energy without any hassle. Our Solar Modules are available from the weight of 5gm to 200gm as per the requirements. They are also available in different dimensions according to the demand of the clients.

• Wattage: 45W (max)
• CCT [K]: 2700, 3000, 3100, 3500, 4000, 5700
• Input: 220-240V
• DC Current: 1200mA (max)

The MODUL system is an adaptation of the NOVA L recessed spot. The modules use a linkable frame assembly to be linked in infinite configurations. Suitable for an LED lamp with a lumen output of 5063 lm producing a IRUV-free light, with an efficient energy balance between heat and light. Asymmetrical gimbaled suspension allows the spot to be swivelled through 45° and rotated through 355°, achieving a maximised, uncut beam with minimal visible outline. The innovative reflector technology uses anodized aluminium making it virtually glare free. Tool-less interchangeability of reflectors offers a wide range for SP, MFL & WFL beams. Compact, pressure die-cast body reduces cutout diameter.

• Type: Polycrystalline;Monocrystalline
• Rated Voltage: 12VDC
• Model Number: PW-3;PW-100;PW-250;PW-300
• Place of Origin: India

- we are manufacturing solar panels from 3w-320w polycrystalline as well as mono crystalline - tuv,ce, ul certified. - 25 years warranty - manufactured with each and every cell and modules tested - high quality insulation and aluminium used

We are offering us a high quality range of environment friendly solar cells & modules. These modules offer a stable performance for multipurpose outdoor applications. Manufactured using high quality raw material, these are highly resistant to the severest climatic conditions. We offer an unmatched 25 years warranty on these products for power output. These technologically advanced products feature bypass diodes, which reduce the power loss caused by shade. The modules use high efficiency 125 mm square mono-crystalline silicon solar cells with over 14% module conversion efficiency. material monocrystalline siliconpolycrystalline siliconamorphous silicon photovoltaics: solar electricity and solar cells in theory and practice the word photovoltaic is a combination of the greek word for light and the name of the physicist allesandro volta. It identifies the direct conversion of sunlight into energy by means of solar cells. The conversion process is based on the photoelectric effect discovered by alexander bequerel in 1839. The photoelectric effect describes the release of positive and negative charge carriers in a solid state when light strikes its surface. how does a solar cell work? solar cells are composed of various semiconducting materials. Semiconductors are materials, which become electrically conductive when supplied with light or heat, but which operate as insulators at low temperatures. over 95% of all the solar cells produced worldwide are composed of the semiconductor material silicon (si). As the second most abundant element in earth`s crust, silicon has the advantage, of being available in sufficient quantities, and additionally processing the material does not burden the environment. To produce a solar cell, the semiconductor is contaminated or "doped". "doping" is the intentional introduction of chemical elements, with which one can obtain a surplus of either positive charge carriers (p-conducting semiconductor layer) or negative charge carriers (n-conducting semiconductor layer) from the semiconductor material. If two differently contaminated semiconductor layers are combined, then a so-called p-n-junction results on the boundary of the layers. at this junction, an interior electric field is built up which leads to the separation of the charge carriers that are released by light. Through metal contacts, an electric charge can be tapped. If the outer circuit is closed, meaning a consumer is connected, then direct current flows. silicon cells are approximately 10 cm by 10 cm large (recently also 15 cm by 15 cm). A transparent anti-reflection film protects the cell and decreases reflective loss on the cell surface. the usable voltage from solar cells depends on the semiconductor material. In silicon it amounts to approximately 0.5 v. Terminal voltage is only weakly dependent on light radiation, while the current intensity increases with higher luminosity. A 100 cm² silicon cell, for example, reaches a maximum current intensity of approximately 2 a when radiated by 1000 wm². the output (product of electricity and voltage) of a solar cell is temperature dependent. Higher cell temperatures lead to lower output, and hence to lower efficiency. The level of efficiency indicates how much of the radiated quantity of light is converted into useable electrical energy. different cell types one can distinguish three cell types according to the type of crystal: monocrystalline, polycrystalline and amorphous. To produce a monocrystalline silicon cell, absolutely pure semiconducting material is necessary. Monocrystalline rods are extracted from melted silicon and then sawed into thin plates. This production process guarantees a relatively high level of efficiency. the production of polycrystalline cells is more cost-efficient. In this process, liquid silicon is poured into blocks that are subsequently sawed into plates. During solidification of the material, crystal structures of varying sizes are formed, at whose borders defects emerge. As a result of this crystal defect, the solar cell is less efficient. if a silicon film is deposited on glass or another substrate material, this is a so-called amorphous or thin layer cell. The layer thickness amounts to less than 1µm (thickness of a human hair: 50-100 µm), so the production costs are lower due to the low material costs. However, the efficiency of amorphous cells is much lower than that of the other two cell types. Because of this, they are primarily used in low power equipment (watches, pocket calculators) or as facade elements. level of efficiency in % lab approx. 24approx. 18approx. 13 level of efficiency in % production 14 to1713 to155 to7 from the cell to the module in order to make the appropriate voltages and outputs available for different applications, single solar cells are interconnected to form larger units. Cells connected in series have a higher voltage, while those connected in parallel produce more electric current. The interconnected solar cells are usually embedded in transparent ethyl-vinyl-acetate, fitted with an aluminum or stainless steel frame and covered with transparent glass on the front side. the typical power ratings of such solar modules are between 10 wpeak and 100 wpeak. The characteristic data refer to the standard test conditions of 1000 wm² solar radiation at a cell temperature of 25° celsius. The manufacturer's standard warranty of ten or more years is quite long and shows the high quality standards and life expectancy of today's products. in addition to optimizing the production processes, work is also being done to increase the level of efficiency, in order to lower the costs of solar cells. However, different loss mechanisms are setting limits on these plans. Basically, the different semiconductor materials or combinations are suited only for specific spectral ranges. Therefore a specific portion of the radiant energy cannot be used, because the light quanta (photons) do not have enough energy to "activate" the charge carriers. On the other hand, a certain amount of surplus photon energy is transformed into heat rather than into electrical energy. In addition to that, there are optical losses, such as the shadowing of the cell surface through contact with the glass surface or reflection of incoming rays on the cell surface. Other loss mechanisms are electrical resistance losses in the semiconductor and the connecting cable. The disrupting influence of material contamination, surface effects and crystal defects, however, are also significant. single loss mechanisms (photons with too little energy are not absorbed, surplus photon energy is transformed into heat) cannot be further improved because of inherent physical limits imposed by the materials themselves. This leads to a theoretical maximum level of efficiency, i.e. Approximately 28% for crystal silicon.

Our long lasting solar energy module is competent of ingesting sufficient amount of solar energy. We are proud to be known as one of the most preferred solar module manufacturers.our superior quality solar energy module are manufactured under international standards.we also wholesale solar module,on very economical quotes.our excellent quality solar energy module can be easily installed for various applications.we use only optimum quality mono and multi crystalline solar cells to manufacture such highly efficient solar energy module. capacity solar modules of capacity from 3w, 5w, 10w, 20w, 30w, 50w, 75w, 80w, 100w, 125w, 150w, 200w, 250wmade-up of high quality mono or poly crystalline silicon waferminimum life of solar module will be 25 yearsmaximum efficiency of solar module is 14%top transferring cover made-up of break proof toughened glassmaximum hail stone resistance to withstand 1 sq. Inch of hailstonelight in weightwater proof and compatible with all season applications mainly used for, solar power packs, solar street lights, solar home lights, solar lanterns, solar emergency light, solar fencing system, solar battery charger, solar garden lights, solar indoor lights, solar out door lights, solar power plants. features: module have +10/-5% power tolerancelow iron, tempered glass, eva encapsulated and anodized aluminum frame construction 3.25 years output warrantyweather resistance junction box or multi – contact connection.light in weightheavy hail stone resistance quality thermal cycling testthermal shock testthermal / freezing and high humidity cycling test.electrical insulation testhail impact testsalt mist testlight and water exposure testfield exposure test. terms & conditions all above mentioned prices are fob india pricesminmum qty. Will be 50 pcs. / each itemsdelivery period will be 60 days after receiving confirmed order/payment.payment terms : 100% against proforma invoiceabove rates are inclusive of all taxesfreight charge will be on your accountwarranty of module : 10 years price 30 watt solar module : 137usd 20 watt solar module : 92usd 10 watt solar module : 47usd

We source solar panels using Crystalline Solar Cells that are individually characterized and electronically matched prior to the inter-connection. Encapsulated beneath high transmission tempered UV resistant glass, these cells are resistant towards harsh weather, moisture and mechanical damage. They perform excellently for both DC loads and inverter equipped systems for AC loads. Our solar panels are certified as per IEC specifications and are manufactured under ISO 9001 certified conditions. 

• Country of Origin: Made in India
• Solar Panel Type: Polycrystalline
• Wattage (Wp): 5KW
• Operating(Nominal) Voltage: 24V
• Number of cells: 60 cells
• Manufacturer Warranty: 1 Year
• Encapsulate: Yes
• Module Efficiency (%): 95%
• Features: Long working life, Durable

Monocrystalline solar modules which uses high efficiency monocrystalline cells. This Module delivers an Industry leading 17.8% efficiency with positive power tolerance. WSM-345 modules have lower LID (Light Induced Degradation) and offers higher return on investment with more watts-per-module. Its best-in-class efficiency ensures savings on balance-of-system and the space required for installation. These module have undergone rigorous in-house tests, exceeding International standards to withstand various operating conditions.

We are Offering Solar Pv Modules.

We are offering solar modules, we offer a range of products to suit the requirements of both the residential as well the commercial markets. Currently, we offer four different panels using polycrystalline cells. The number of cells ranging from 48 cells to 60 cells and respective power then subdivides each category of module. pvq3: our flagship product based on next generation q6ltt3 cells from q cells, germany. The innovative cell design using 3 bus bars instead of the traditional 2 bus bars offers several advantages that improve module performance and efficiency. Know more» eco: this high quality, cost competitive module is based on high efficiency premium cells from eton solar, taiwan. Identical in construction & other raw materials to the pvq3, except the cells, this module offers a high quality cost competitive solution for the commercial installations. Know more» customized products: from bipv solutions to certified laminates, pv power tech can offer custom solutions for each individual requirement.

We are offering pv solar modules high conversion efficiency - leading innovative photovoltaic technology. High reliability - guaranteed power output, faster roi. Consistent field performance and high longer durability. Approval for high wind-pressure, snow load rated and extreme climatic variations. Consistent field performance and durability. Proven track record.

Jain Photovoltaic Modules are made from high efficiency Mono / Multi Crystalline solar cells The cells used are of 14.0% to 17.5% efficiency. The cells are encapsulated in a low iron content, high transmissivity, tempered glass using UV stable Ethylene Vinyl Acetate (EVA) sheets. The premium quality back sheet protects the cells from the environmental conditions. The laminates are framed with strong and anodized aluminum profile with multiple holes for ease of installation. PV modules are fitted with 2/3/4 terminal junction box, depending on application. The mdoules with 4 terminal junction boxes are generally fitted with by-pass diodes.

• Brand: Polycab
• Solar Panel Type: Polycrystalline
• Wattage (Wp): 335 Watt
• Operating(Nominal) Voltage: 1500 V
• Number of cells: 72 cells
• Frame Size: 40 mm
• Linear Performance Warranty: 25 Years
• Features: Anodized aluminium alloy frame for robust protection, PID free Modules with extra-long-term reliability, Better performance even at low Irradiance condition  

Powermax energies - our company is counted amongst the foremost manufacturers & exporters, suppliers of solar photovoltaic modules in india.

solar energy module, Solar led aviation light

• Brand Name: GreenBox
• Model Number: GB200WS
• Place of Origin: India

GreenBox™ which is a unique all-in-one product from “Omega Natural Polarity Pvt Ltd”, this consist of all parts required to go solar electrification in simple easy steps. The system comprises of Solar PV Module (Solar Cells), charge controller, battery and LED lights (Optional). The solar module is installed in the open on roof/terrace exposed to sunlight and the charge controller and battery are kept inside a protected place in the house. The solar module requires periodic dusting for effective performance.

solar panel module, Solar Water Heater, Solar Led Home Light

Mono PERC Solar Module, ev battery, renewable energy system

Solar PV Module, Solar LED 5 Watt Bulb With Battery, amorphous solar panel