Solenoid Valve Dealers in Sakinaka, Mumbai

• Size: available in all standard sizes
• Material: standard AL body with hardning,Aluminium
• Number Of Way: available in all standard
• Connection Type: mounting as per satndard
• Flow Rate (Cv): varies as per the the product
• Coil Power Consumption: 5W
• Operation Mode: available in all standard
• Voltage (DC): 24V and 230v both available
• Brand Name: Mercury Pneumatics
• Type: Solonoide v/v

• Media: Air
• Valve Size: 1/4 inch
• Brand Name: Luthra
• Automatic Grade: Semi-Automatic
• Pressure: 10 bar
• Control: Direct-Operated, Pilot Operated

  Danfoss solenoid valve bodies and electrical coils are normally supplied separately and then combined. They are assembled quickly and simply without tools, providing optimum product flexibility and availibility. If a coil does need to be replaced, it can be done without stopping or draining any system. The solenoid valves are also available as assembled units if required.

We are offering diaphragm solenoid valves. 22 pilot operated- diaphragm series type : ss 221 w-normally closed for water oil sizes: 15 mm to 50 mm (g12" to g2") these valves are specially designed for domestic irrigation agriculture and industrial application. Needs no maintenance due to durable body material made of brass. Highly reliable, long-life.

Application: Single or double-acting cylinders. Actuation: 9593, 9524 and 9554 are solenoid operated. Operation with single-acting cylinder: Either oil port “A” or “B” must be plugged on valve. With port “B” plugged, solenoid is energized to position “A,” oil port “A” becomes pressurized. When solenoid is energized to position “B,” oil port “A” becomes the return port. Operation with multiple single-acting cylinders: A pressure line from one bank can be connected to oil port “A” and the other to oil port “B” on the valve. Sequence: When energized to position “A,” oil port “A” becomes pressurized and clamps the fixture connected to oil port “A”; oil port “B” becomes a “return” port for cylinder connected to oil port “B,” and retracts it. The opposite happens when solenoid “B” is energized. Operation with double-acting cylinder: Port “A” is connected to “advance” port of cylinder, oil port “B” connects to cylinder “return” port. Solenoid is energized to position “A,” oil port “A” becomes pressurized to extend cylinder piston. The opposite happens when solenoid “B” is energized. Valve does not hold in “retract” position. NOTE: When using more than one valve on a pump, the tank port may require a check valve (9580) to permit inadvertent, momentary extension of a retracted cylinder. NOTE: If pump is equipped with an internal outlet check, a “hold” position can be maintained with the pump shut off. NOTE: Valves are shipped without control switch. For valves 9524, 9554 and 9593, use Remote Hand Control (No. 304718). For valve 9595, use Remote Hand Control (No. 209593). NOTE: Valves have 1/4" NPTF ports. 3/8" to "1/4" adapters are included. NOTE: Maximum tank line pressure for remote mounted valves is 500 psi. NOTE: Valves are shipped without control switch. Use Remote Hand Control (No. 202777). CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application.

Function Operated by two way-three way solenoid pilot valve, 3110 a Solenoid Control Valve is an on-off control valve that either open or closed upon receiving an electrical signals to the solenoid pilot control, provides two position (on-off) Operation. Operation This valve is consist of a "ACV" main valve and a two way solenoid valve. The main valve opens fully or closes drip tight depending upon the actuation position of the solenoid, energized to open/energized to close. The valve may be remotely operated by times, relays, probes or any triggered device to the solenoid. Size : 25NB - 400NB

• Packaging Type: Carton
• Voltage: 24 V AC, 24V DC, 110 V AC, 230 V AC
• Brand Name: CompAir Systems
• Material: Brass
• Warranty: 1 Year
• Country of Origin: India
• Media: Air
• Power: Solenoid, Hydraulic, Pneumatic
• Condition: New

We are offering Solenoid Valves.

• Coil Voltage: Standard-230-volts, 50Hz AC.Optional-Any Standard AC range.

Enclosure :Standard-General Purpose SQ. moulded coil upto IP-20, Optional- Weatherproof SQ. moulded coil upto IP-67, Flameproof Round coil upto FLP IIB FLP IIC.Application:Steaming equipment, textile, processing equipment, laundry equipments, kitchen equipment and others.

2 Way Directional control valve suitable for Air and Fluid medium in food industries, Pharmaceutical industries, Chemical application and highly corrosive environment and also it is protected with flame and weather proof enclosure

pilot operated valves, Hydraulic Pumps, hydraulic spare parts

• Features: Through conduit type,No retention area,Dimensional accuracy

 AVAILABLE IN PRESSURE RATING 150 & 300 IN FLANGED, BUTT WELD AND SCREWED END CONNECTION )( TYPICAL APPLICATION - STEAM AND HOT OIL )   FORGED BELLOW SEAL GLOBE VALVE, SOCKET WELD ENDS ( FCBGL-S ) FORGED BELLOW SEAL GLOBE VALVE, FLANGED ENDS ( FCBGL-F ) FORGED BELLOW SEAL GLOBE VALVE, SOCKET WELD ENDS ( FCBGL(BR)-S ) FORGED BELLOW SEAL GLOBE VALVE, FLANGED ENDS ( FCBGL(BR)-F )

• Material: PVC
• Media: Powder/Solids
• Brand Name: Janatics
• Volts: 220V AC
• Power: 6VA/5VA
• Type: AC23A
• PR Range: 2-10bar

• Air, Oil, Water, Steam, Gas: ¼” to 2” BSP
• up to 18 kg/cm2: 100v / 240v / 24v.AC / 24v.DC

Our pneumatic solenoid valves are made from Brass, Carbon steel or Stainless steel.They are available in the following types:Plunger operatedDiaphragm typeGlobe type

Sensitrol Valve is a tight shut-off valve with precision V-oil port for micro-metering and uniform flow of oil through-out the 180 degree sweep of the control handle. Sensitrol Valves are tight shut-off valve to prevent dribbling oil into burners during shut-down. It also permits the convenience of shutting off the burner without disturbing the Sensitrol's limiting orifice setting. Sensitrol valves are available in 6 sizes depending on oil flow requirements.

pulse jet diaphragm valves, Industrial Air Filters, pH Meter

Cabinet Panel Cooler Accessories are available with a standard two-way normally closed solenoid valve and thermostat kit Model 90015 (120V) or Model 90016 (240V). This limits the flow of air only when required. The thermostat is factory set at 95°F (35°C) and will normally hold +/- 2°F (1°C) inside the enclosure. It is rated 24V-240V, 50/60Hz. Ul recognized and CSA approved. Thermostat And Solenoid Valve Kit This kit comes complete with a solenoid valve, thermostat, and a resistor. The resistor is included should you encounter rapid temperature fluctuations in the control panel causing the solenoid to cycle on and off to quickly (chattering). The resistor is installed (if needed) across the leads of the thermostat and prevents chattering by dampening the thermo switch sensitivity.  

• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 3/4inch, 4/5inch, 5/6inch, 6/7inch
• Type: Pilot Valve
• Material: Brass, Carbon Steeel, Metal, PP, PVC, Stainless Steel, UPVC
• Application: Pet Blowing
• Color: Black, Grey, White
• Condition: New, Used
• Feature: Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• Pressure Range: 1-40Bar, 40-80Bar
• Orifice: 0-40mm, 40-80mm