Spark Tester Dealers in Mumbai

• Features: Electronic switching based unique design.,Sine wave, low power circuit.,All digital displays for easy readout.

We manufacture Spark Testers for extrusion and rewind lines to check for defects in cable insulation. Cable passes through in a high-voltage bead chain electrode in the spark tester, and any insulation fault causes a spark from this electrode to the ground via cable core. Any spark is detected by spark tester electronics and registered as a fault. By using spark testers at your extrusion or rewind lines, you can monitor your cable product. If there is any fault in cable insulation, the spark tester will warn you by its alarm and you can search the possible cause and fix the problem, so you get product without any faults.

• Condition: New
• Application: Industrial
• Warranty: 1yr
• Brand Name: LALITH,LALITH
• Voltage: 220V

Digital HVAC Spark Tester for online Testing of Cables during manufacturing Ranges 15 KV to 40KVAC,50Hz

High Frequency Spark Tester consists of a Solenoid and an Interrupter which has natural High Frequency and when the current passes through the Solenoid, the hammer is attracted by its core, thereby breaking the circuit and at the same time charging the condenser. The hammer then springs back reforming the contact and allowing the condenser to discharge through an inductance of a few turns of thick wire of the Tesla Coil.

• Brand Name: Puretronics
• Voltage Range: 0 - 25 kv
• Dimension: 450 x 336 x 405 mm
• Electrode: Bead Chain housing of 350mm long
• Sensitivity: Adjustable sensitivity knob
• Approximate Weight: 20.4 Kg
• Test Frequency: 2.5 - 3.5 kHz
• Wire Size: 0.5 - 15 mm
• Wire Speed: 2500 mts/min
• Fault Counter: Digit LCD
• Safety: Door Interlocking
• Wire Running Height: 900 mm to 1100 mm

• Features: Electronic switching based unique design.,Confirms to National / International standards..

We manufacture Spark Testers for extrusion and rewind lines to check for defects in cable insulation. Cable passes through in a high-voltage bead chain electrode in the spark tester, and any insulation fault causes a spark from this electrode to the ground via cable core. Any spark is detected by spark tester electronics and registered as a fault. By using spark testers at your extrusion or rewind lines, you can monitor your cable product. If there is any fault in cable insulation, the spark tester will warn you by its alarm and you can search the possible cause and fix the problem, so you get product without any faults.

• Type: Spark Tester
• Brand Name: Bosch
• Certification: ISO 9001:2008 Certified
• Application: Control Panels
• Condition: New
• Frequency: 45Hz
• Feature: Easy To Use
• Operating Current: Double Phase
• Warrenty: 1year
• Temperature Capacity: High Temperature
• Puncture Voltage: 11000V

High Frequency Spark Tester consists of a Solenoid and an Interrupter which has natural High Frequency and when the current passes through the Solenoid, the hammer is attracted by its core, thereby breaking the circuit and at the same time charging the condenser. The hammer then springs back reforming the contact and allowing the condenser to discharge through an inductance of a few turns of thick wire of the Tesla Coil. This metal rod when brought within 1cm of the lining of the tank or any other vessel, produces a diffused Spray discharge, but if there is a minute crack, or microscopic hole in the lining, whether it be Glass or Rubber or PVC or any other insulation, this diffused discharge is concentrated into a bright spark passing through the hole or crack. This phenomenon is attributed to the fact that High Frequency current possess a very high tendency of taking the nearest passage to Earth. This method is therefore very useful in detecting faulty lining of vessels or tanks etc, or faulty insulation of cables, or for the detection of leaks and cracks in High Vacuum Systems, Scientific and laboratory glass apparatus