Spray Dryers Dealers in Mumbai

Reproducible powder production at lab scale; Ideal for scale up to pilot or production; Proven performance – the most established & flexible instrument for LAB spray drying; Cost efficient — achieve reproducible result at minimal costs; Easy to use; Simple switching between two nozzle variants; High yields (upto 70%) Shorter times to optimize formulations       Additional Features : Online nozzle cleaning with deblocker 3-Fluid nozzle for spraying immiscible fluids Inert loop for condensation of solvents and feed back of inert gases Fast setup and cleaning times Lowest maintenance costs Requires only AC 200/230V; 50/60Hz power supply (other power requirements available) PC based operating system with ethernet interface Inert Loop for closed cycle spray drying Inlet – Pre + HEPA filters Outlet filter with pressure drop indication for optimal protection of the aspirator A compact laboratory spray dryer with a maximum temperature of 26000 and liquid flow rate of up to 1000 ml per hour. This unit is ideal for research and development and sample preparation of many products. All units feature a simple and intuitive touch screen operation system with recipe functions and USB data logger.   Technical Specification GLS 1000 Mini Spray Dryer   Evaporation capacity : 1000 ml / hr of water; higher for organic solvents Sample volume : 30 ml – 1 L Air flow max. : 50 cu.m/hr (free running) Heating power : 4 KW Max inlet temp. : 260° C; Accuracy ± 1° C Hot air flow : Co-current Nozzle type : Two-fluid nozzle with deblocker Nozzle diameter : 0.5 & 0.7 mm with deblocker assembly; 1.0 mm, 1.5 mm & 2.00 mm also available Compressor pressure : Max. 8 bar Typical yield : 40 – 70 % Operating conditions : Open, optional closed cycle with inert loop Power consumption : Max. 14 amps Voltage : 200 – 230 V; 50/60 Hz Dimension (H x W x D) : 1100 x 500 x 600 (mm) Weight : 60 kg    

KERONE has been leader in designing, manufacturing, installation and commissioning of Spray dryers various ambits of processes and applications. The spray dryers (IR Dryers) are designed and customized to fit into need of your process need for drying requirement and process plant suitabliity. Spray drying has been one of the most energy-consuming drying processes, however the spray dryer desinged and build by KERONE is optimised to utilise the energy in very efficient mannes. The Spray dryers has been one that is necessary in production of dairy and food product powders. Basically, spray drying is carried out by atomizing feed liquid into a drying chamber, where the little droplets are submitted to a stream of hot air and convinced to powder particles. As the powder is discharged from the drying chamber, it is passed through a powder/air separator and collected for packaging. Most spray dryers are equipped for primary powder collection at efficiency of about 99.5%, and most can be supplied with secondary collection equipment if necessary. Salient features of Spray dryers are as follows Solutions, suspensions, slurries and pastes, which can be pumped, can be dried on spray dryers. The advantage of spray dryer is rapid and non-contact drying. Much higher initial temperature of drying medium can be used. High evaporation rates and thermal efficiencies are achieved. It can be quickly started and shut down. It is capable of handling volatile or inflammable solvents in a closed cycle.

At advanced drying systems, we offer an extensive range of pilot spray dryer that is well-known as a proven planning tool. It is also used to scale dehydration plant. Our range of pilot spray dryer is fitted with heavy duty mechanisms to effectively function as a full sized system. In addition, this equipment is offered for long and short term lease and is thereby used to make changes to production drying applications without investing large capital. salient featureshigh qualityeasy operationsmooth functionalityhigh tensile strengthrobust construction used inpharmaceutical industrieschemical industriesfood industries

Spray Dryer that we offer is widely used for converting the slurrier into fine droplets by the method of spraying the materials into a stream of hot gases. The slurry is further pumped through an orifice at high pressure or through a high speed perforated rotating disc. The droplets thus formed are brought into contact with hot air and are converted to dry powder or granules that are further used for drying of polymers, detergents, food, dyestuff, chemicals, ceramic, etc. This Spray Dryer is widely applied in ceramic tiles making plant, dyes intermediates, natural products, etc. Spray dryer consists of a large cylindrical & usually vertical chamber in which material to be dried is, in the form of small droplets and fed a large volume of hot air sufficient to supply the heat, necessary to complete evaporation of liquid. Spray drying process is applicable to a wide range of products and industries. SF ENGG WORKS handles the project ranging from laboratory size to large industrial spray dryer processing lines an plants. Design Consideration Co-current Type : Feed and hot air enters from same side. Feed is from rotary atomiser and nozzle Counter Current : Feed is from top side and hot air from bottom side. Feed is from rotary atomiser and nozzle Co Counter Type : Feed is from bottom side and hot air is from top (Fountain) side. Feed atomisation is through pressure nozzle or two fluid nozzles. Chamber Design Tall Tower with high pressure nozzleRotary Disc Atomiser TypeBustle Type Construction Atomization System Pressure NozzleRotary Disc Atomizer TypeTwo fluid Applications Ceramic Tiles Making PlantHerbal extractFood ProductDyes intermediatesNatural productsTea Specialise in Design, development and engineering of plants to manufacture product in powder or granular form.Spray cooling process.Capacity ranges from Small lab models to Large industrial plant.Plant equipped with maintenance tools and tackles. Process control by semi automatic to PLC SCADA based, fully automatic system.

Spray drying is a process where dry powder is produced from liquidslurry by constantly drying it with hot airgas. Benefits of spray drying 1. Consistency in product particle size. 2. Short residence time required, which makes the drying process fast and cost effective. 3. Homogeneous production we are into spray drying job works for over a decade now, and have gained expertise in the following products: 1. Surface active agents 2. Sodiummetal salts of organic products 3. Potassium salts 4. Fertilizers (micronutrients) 5. Low temperature enzymes 6. Food products 7. Pharmaceuticals

• 1.0 L/hr H2O max.:  250°C ± 1°C accuracy.
•  2.5 KW.: 2-5 bar.
•  4",6" or user specified.: Two-fluid, co-current, SS-316L, 0.7mm, with Auto-De-blocking device & option for variable nozzle apertures.
• Product contact parts & main stand: SS-316L.  Heating Apparatus: Borosilicate Glass. Interconnecting Parts: Teflon, Silicon, Alkathene.: 50x60x100cm.

Features PLC based control system. HMI user interface ( Touch screen - optional) PC based software for control and data acquisition. Spray dry with aqueous as well as solvent based solutions. Compact table top model; enables  spray drying trial with even 30 ml samples. Designed with a SS-316 material & reinforced with flameproof motors, to withstand the effect of acid & solvent spray drying. Simple to operate and clean, economical and gives quick results. Spray drying         Microencapsulation.     Recovery of synthetic or extracted products.   Structure Conversion.

Features:- * Designed to demonstrate principle of spray drying method of aqueous solutions. * Can be used for drying wide range of products. * Comprehensive Instrumentation Panel with all necessary measuring instruments & Safety

A spray dryer is a device which takes a liquid stream and separates the solute or suspension as a solid and the solvent into a vapour. The solid is usually collected in a cyclone. Spray dryers can dry a product very quickly compared to other methods of drying. They also turn a solution or slurry into a dried powder in a single step, which can be advantageous for profit maximization and process simplification.     Some of our manufactured Spray Driers are installed at   • Golden Chemical P Ltd. – Mumbai • Tinco Chemicals P Ltd. – Badlapur

Voice Engineers is a Spray Dryer Manufacturers. Spray Drying is a continuous single stage operation, extensively used to convert solutions, suspensions, and slurries into dry powder within a few seconds without any intermediate handling. The Spray Dryer Manufacturers being very rapid, the product temperature does not go up markedly. Thus Spray Dryer is eminently suitable for drying heat sensitive materials. Spray Dryer comprise a large cylindrical chamber, basically vertical in position in which the material is dried into small droplets. These droplets are further fed with hot air which is sufficient for supplying the heat for complete evaporation of liquid. Feed is taken from rotary atomizer or nozzle.atomizer. Voice Engineers is Designer, Supplier and Spray Dryer Manufacturers The design description is as follows:- Co-current Type : Feed and hot air come from same side. Counter Current Type : From top side feed is given and hot air comes from the bottom side. Co-counter Type : Here the feed comes from bottom side and hot air flows through top. The chamber design comprises following features: - High pressure nozzle on tall tower Construction in a bustle type format Provision of Rotary Disc Atomiser Basic characteristics of our equipment are :- High thermal efficiency Automatic temperature and feed rate control Dustless atmosphere Production of Free flowing product Production of round, uniform and high purity particles.   APPLICATION : Milk, ceramics, dyes, dyes intermediates, pigments, detergents, herbal and other natural products extracts, baby food, herbicides, matto dextrin, silica, yeast, antibiotics, enzymes, etc.

• Brand Name: Metwiz
• Capacity: 5 liter
• Usage/Application: Spray drying powder
• Material: SS
• Model Name/Number: MW-SD01

We are offering industrial spray dryer. Special features 1.dryer has steep cone bottom for free flow powder. 2.special reinforcement structural allow drying chamber to expand hence no dent is formed during expansion & contraction. Multi cyclone design gives better recovery of product. 3.single point collection to minimize dusting automatic temperature and feed rate controls. 4.plants are designed in closed cycle version for drying feed containing organic solvents. 5.aseptic design offered for pharmaceutical application.

You want to benefit from an ingenious technology of spray drying for your demanding product development process. We offer the market leading solution with the most possibilities in applications to reduce development time Spray drying, spray chilling, and microencapsulation with one product. Processing of organic solvent based samples in combination with the Inert Loop B-295 Processing of organic solvents and water mixtures based samples in combination with the Inert Loop B-295 and the Dehumidifier B-296

We are offering laboratory spray dryer. Laboratory spray dryer has been indigenously developed by jisl laboratory equipment division. It is designed with a ss-316 material & reinforced with flameproof motors, to withstand the effect of acid & solvent spray drying. It lets you spray dry with acqueous as well as solvent based solutions. technical specification mains voltagepan> : 230 v 50 hz (220v-240v) power rating. : 2900w current consumption : 12a evaporation capacity : max. 1.00 lhr h2o aspirator blower capacity : max. 118 nm3hr temperature of drying air : 250° c ± 1° c accuracy heater capacity : 2.0 kw compressed air for spray flow : 2-5 bar nozzel : two-fluid, co-current, ss-316l,0.7mm with auto de-blocking device material of construction : main stand : ss-316l heating apparatus : borosilicate glass dimension l*w*h : 50 * 60 * 100 cm weight : 60 kg rs-232 port for pc printer interface : available with spraymate lsd 348 spraywin software : available free with spraymate lsd 348 optional accessories : counter- current nozzel twin cyclone attachment spray congealing attachment variable nozzel apertures-0.5,1.0,1.5mm nitrogen inert loop hot melt system.

• Country of Origin: Made in India
• Quality: standard quality
• purpose: Industrial
• Durability: durable

Kilburn designs, manufactures & installs spray dryers based on product trials taken in the pilot plants at its test centre.

Pilot Spray Dryer 5Kg / hr

pharmaceutical pilot spray dryer, Fluid Bed Dryer, iodized salt machine

Spray Dryer, blenders, ROTOCONE VACUUM DRYER, Isolators, Vaccum Tray Dryer

Laboratory Spray Dryer

Spray Dryers, laundry soap machine, EAR LOOPS FOR MASKS, nose clip

Spray Dryer, Ammonium Para Tungstate, Tungstic Acid, Tungsten Trioxide

Laboratory Spray Dryer, Built-in Ultrasonic Spray System, Syringe Pump

spray drying, Zero liquid discharge, Agitated Thin Film Dryer, Drying System

spray drying, Pharma Machinery, Chondroitin Sulphate, Saw Palmetto Extract

spin spray dryers, Blender, tumbling dryer, Vessels, spin flash dryers

Spray Dryer, Sparkling Beads for hand wash, Fluid Bed Dryer, BASKET EXTRUDER

Spray Dryer, Flash Dryer