Spring Seals Dealers in Goregaon, Mumbai

• Temperature: -20C to +180C
• Pressure : 10 bar g Speed: Speed

Single Seal, Unbalanced, Conical spring, Dependent on direction of rotation, It is used for process industry, Water pumps Low solids contents media, Submersible pumps etc.

• Country of Origin: Made in India
• Shape: Round
• Specialities: Impeccable range, Available in different models that can be applied as replaceable or fixed bellow face, These Spring Balanced Seals are capable of offering flexibility to select material.

• Velocity: 10 m/sec
• Pressure: 10 bar (max)

Type VBSM - 3 is single conical spring, unbalanced seal with O-ring provided for secondary sealing. Since the Torque transmission is done by the single coil springs the seals are dependent on the directions of rotation, which is seen from the drive end of the shaft. Right handed spring and left handed springs are provided for clockwise and anticlockwise rotating shafts respectively. These seals can carry a variety of seals faces, serving application in submersible, sewage, chemical transfer, water pumps etc.

We offer Single Spring Seal (HT Series) which is specially designed for High Melting Liquids. Single Spring Seal (HT Series) is basically used as a replacement to metal bellow. Equipped with interlocking drive, our Single Spring Seal (HT Series) is a self-cleaning seal. Single Spring Seal (HT Series) is cost effective as compared to metal bellow. Versions Available Un-Balanced Seal - HT0 – HTW Operating Limits Diameter : 10â€Â¦.. 100 mmPressure : 20 ......35 barTemperature : -60oC â€Â¦ +260oCSpeed : 25 m/s Applications Vegetable OilThermal OilGeneral ChemicalsFatty Acid

SM-31 is single conical spring, unbalanced seal with O-ring provided for secondary sealing. Since the Torque transmission is done by the single coil springs the seals are dependent on the directions of rotation, which is seen from the drive end of the shaft. Right handed spring and left handed springs are provided for clockwise and anticlockwise rotating shafts respectively. These seals can carry a variety of seals faces, serving application in submersible, sewage, chemical transfer, water pumps etc.

The Series 401 is a single conical unbalance mechanical seal.These type of seals are dependent of shaft direction of rotation. Clockwise rotating Shaft Required Right Handed Spring & Anticlockwise rotating Shaft Required Left Handed Spring. The Rotating Shaft transmit the torque to the spring. This seal are easy to install.

• Size: 10 mm to 100 mm
• Usage/Application: Industrial
• Model No.: RI-109U
• Pressure: 10 Bar (Max)
• Temperature: - 20 Degree To + 180 Degree C
• Seal Faces: Sic/ carbon / TC VS Ceramic / Sic / TC

We are offering single spring balanced seal. Seal proof make complete bidirectional single spring unbalance mechanical seal.this series of mechanical seal are design for the dirty media type applications.it is independent in the direction of rotation. It is simple in construction and easy to instal. Torque transmission for seal ring will be done through its drive lug.all parts of the seal are interchangeable,one can easily convert spe701 to spe704 only by changing it’s elastomers.

Single Spring Mechanical Seal, Teflon Bellow Mechanical Seal

• Shaft Diameter: 5/8" to 6.0"
• Speed: 25 m/s
• Temperature: 70oC to +350oC
• Pressure LIE/701: 18 bar (Up to 260 psi)
• LIE/701B: 40 bar (Up to 580 psi)

Multi Spring Seal (LIE-701 & LIE/701b): Multi spring, pusher type seals in unbalanced and balanced configurations, ensures uniform loading of seal faces and can be mounted internal or external. Most versatile design, high temperature and type LIE/701B most suitable for high pressure. Most of the components are interchangeable between balanced and unbalanced seals. These seal have a cartridge type rotary unit which is compact and easy to install. Maximum compactness design for fitting in shorter and limited space .The rotary unit of multiple spring seal comprises of three pieces namely, compression ring, multiple spring and seal ring. If seal ring damage, it can be easily replaced by new one without changing complete seal housing. Our multiple spring seal has specially designed exposed rotary unit, which helps in cleaning of accumulations around spring when used in dirty fluid. The multiple spring seal is not affected by direction of shaft rotation and is made for heavy duty and high performance. It is most suitable for clear liquid, acidic liquid, lubricating non corrosive liquids, light hydrocarbon, petroleum , pharmaceuticals and chemicals Etc. Material Of Construction Sealing faces : Carbon, Ceramic (99.5 %), Silicon Carbide, Tungsten Carbide, Chrome Cast Steel & which Elastomer : Viton, EPDM, Silicon, Aflas, PTFE, GFT & Grafoil, Karlez, FEP, TTV Hardware : SS 316, Hastelloy C, Monel, Alloy 20  

• Shaft Diameter: 10 to 100mm
• Pressure: up to 10 Bars
• Temperature: -50 to 180°C
• Speed: up to 25 m/s

We are offering a wide range of Conical Spring Unbalanced Seal to our prestigious customers. These are incredibly rugged & reliable & therefore used in wide range of sealing applications.The LTS61U series seal are extremely rugged & reliable & therefore used in wide range of sealing applications. These Seals have very few parts & hence can be easily assembled or dismantled. CONICAL SPRING UNBALANCED SEAL TYPE LTS61U Generally used for handling corrosive chemicals, hydrocarbons, general &  light chemicals Applications : Materials : Seal Faces                : Sic/carbon/TC Vs Ceramic/Sic./TCSecondary Seals      : Viton/PTFE/GFTMetal Components : SS-316

We are one of the famous company, who are manufacturer of Single Coil Spring Seals

• Thickness: 10-20mm, 20-30mm, 30-40mm, 40-50mm
• Packaging Type: Packet
• Outer Diameter: 5mm, 10mm, 20mm
• Inner Diameter: 30mm, 40mm, 50mm
• Feature: Unbreakable, Heat Resistant, Good Quality, Fine Finish, Easy To Install
• Size (Inches): 2Inch, 4Inch, 6Inch, 8Inch, 10Inch
• Pressure (Bar): 25 Bar
• Seal Width: 10mm
• Seal Length: 100mm
• Type: Industrial Seals
• Material: Steel
• Shape: Round
• Color: Black
• Condition: New
• Finishing: Polished
• Country of Origin: India
• Material Grade: SS304
• Suitable For: Water
• Sealing Type: Mechanical
• Automation Grade: Automatic
• Usage: Oil Industry
• Chemical Resistance: Yes

• Temperature: -50 to +150 ºC(max)
• Shaft Diameter: 12mm to 200mm

Wave Spring seals are designed for pumps working with fluids with suspended particles, sludges,high viscosity liquids etc. Typical industry usage is dairy, brewery and pharmaceutical applications. Compact in design these seals can be utilized in smaller stuffing boxes. The standard design features positive drive via the grub screws, which are also used to set the seals working length. The uniform force that a wave spring provides gives consistent axial movement and dynamics. The design features a crest-to-crest wave spring and reduces the risk of corrosion and fracture as can be experienced with welded wave springs

We hold specialization in manufacturing and supplying Conical Spring Seals. These Conical Spring Seals are known for the excellent make and durable life. The Conical Spring Seals, we provide, are much demanded by several industries for excellent features. To cater to the diverse needs of the clients, we provide the Conical Spring Seals in assorted sizes and specifications.