SRS Pumps Kandivali, Mumbai, Maharashtra

This model is available in various types of materials and configurations for various types of industries. It can be configured for suspension plate or self supporting stand. These sump and condensate application pumps are available with high thrust bearing for temperatures over 200 degrees Fahrenheit. These pumps are available in 1.5 inches to 8 inches discharge sizes and flow rate upto 1600 GPM. industrial sump pumps to handle various type of fluids from drainage water or any liquid waste containing non-fibrous solids to larger industrial processes.

We offer qualitative range of plunger pumps (dosing pumps / metering pumps) and industrial metering pumps. Our range of plunger type dosing pumps, industrial metering pumps is positive displacement pumps and in each cycle of operation these pumps displace a particular amount of fluid. The pumping action is created by the reciprocating motion of a plunger. As per the requirements of the customers, we offer our assortment of plunger metering pumps and industrial metering pumps in different models. Our plunger dosing pumps and industrial metering pumps, have two parts such as drive end mechanism and the liquid end mechanism. It can be distributed in simplex, duplex or multiple heads for handling various chemicals with a common motor to facilitate the whole operation. Each head is independently connected and the capacities of each head are also independently adjustable. Following are the specifications and features of our assortment:   It can achieve flow rates up to 10000 lts/hr and delivery pressures up to 400Kg/sq.cm. Steady state metering accuracy of +/-1% of pump output. At single setting of stroke from 10% to 100%. Easily handles corrosive, abrasive or viscous fluids. Heating of cooling jackets for liquid head also available. Flow metering accuracy is almost independent of back pressure of liquid. Piping layout (Acceleration losses & NPSHR) Discharge flow rate is linear to ariation of stroke length.   Simplex Plunger Pumps: A simplex plunger pump is a reciprocating pump. This pump has a single liquid cylinder which forces liquid out through the top outlet on both the in and the out stroke. They can be single acting or double acting. Duplex Plunger Pumps: The duplex plunger pump is similar to the simplex plunger pump, having two pistons instead of one, providing smoother operation with individual or common inlet & outlet. Triplex Plunger Pumps: Triplex plunger pumps are very similar to duplex plunger pumps. They are reciprocating pumps with three cylinders. This pumps can be used for liner flow at high pressure.

A simplex plunger pump is a reciprocating pump. This pump has a single liquid cylinder which forces liquid out through the top outlet on both the in and the out stroke. They can be single acting or double acting.

The pumping action is created by the reciprocating motion of a plunger. As per the requirements of the customers, we offer our assortment of plunger metering pumps and industrial metering pumps in different models. Our plunger dosing pumps and industrial metering pumps, have two parts such as drive end mechanism and the liquid end mechanism. It can be distributed in simplex, duplex or multiple heads for handling various chemicals with a common motor to facilitate the whole operation. Each head is independently connected and the capacities of each head are also independently adjustable. Following are the specifications and features of our assortment: qualitative range of plunger pumps (dosing pumps metering pumps) and industrial metering pumps. Our range of plunger type dosing pumps, industrial metering pumps is positive displacement pumps and in each cycle of operation these pumps displace a particular amount of fluid.

We design and manufacture the industrial sump pumps to handle various type of fluids from drainage water or any liquid waste containing non-fibrous solids to larger industrial processes. This model is available in various types of materials and configurations for various types of industries. It can be configured for suspension plate or self supporting stand. These sump and condensate application pumps are available with high thrust bearing for temperatures over 200 degrees Fahrenheit. These pumps are available in 1.5 inches to 8 inches discharge sizes and flow rate upto 1600 GPM. Features:   Adjustable impeller, Leak proof, Vapor tight construction, Extensions for pit depths from 2 to 20 feet.   Applications:   Sump drainage, Industrial process, Elevator pits, Basements, Power plants, Flood control, Storm water, Condensation control, General dewatering service.

SRS Pumps is a manufacturer of domestic and industrial diaphragm type dosing pumps, hydraulic diaphragm pumps, shaped diaphragm pumps and air-operated double diaphragm pumps. Hydraulic diaphragm pumps are recommended for the applications where the leakage is not at all permitted. It provides an integral safety valve which can automatically protect the diaphragm while the fluctuation in the line. Shaped diaphragm pumps (Mechanically Operated Diaphragm Pump) without gland packing and hydraulic oil can be offered for dosing chemicals and other liquids. Here the shaped diaphragm is directly connected to the reciprocating mechanical parts from the connecting rod mechanism. Viton, Neoprene or Teflon faced rubber are working as a diaphragm material.

high pressure pumps are designed and manufactured by srs pumps with advanced pump technology which ensure quality, reliability and efficiency. Our high pressure pumps are horizontal, simplex or triplex positive displacement plunger pumps. our high pressure equipments is the most versatile, time-and-cost effective solution for cleaning, cutting, removing, descaling, testing, spraying etc. design: pump drive end assemblies are of rugged construction with high quality materials and heavy duty taper roller bearings. Bearings are lubricated by splash lubrication. Pumps are designed to permit rapid and economical maintenance, particularly regarding plunger, packing and valves are manufactured to ensure accurate alignment on reassembly. applications:   hydro testing. chemical injections. cleaning of tanks, vessels, tube bundles of heat exchangers. r.o. Plant applications removing oil & chemical build up sludge. boiler feed, etc.   liquid ends: liquid ends can be offered in s.s 304, s.s.316,s.s. 316 l, hastelloy b or c, alloy 20, etc.capacity max - 25000 lphpressure max - 350 bar technical specifications:   pump type - horizontal , triplex reciprocating plunger pump max working pressure - 30,000 psi max discharge - 12 lpm max power - 10 hp duty - intermittent stroke length - 32 mm power drive - electric motor / diesel engine mounting - base plate / skid / trolley power end connection - pulley driven / gear reduction dry weight of pump - 25 kgs (bare shaft )   working principle: fluid can be accelerated to very high velocities through a nozzle by the application of sufficient hydraulic horsepower. Hydraulic horsepower is proportional to the product of fluid pressure and the volume delivered. Fluid velocity is proportional to the pressure developed through a nozzle orifice. The impact of high pressure fluid jets can remove deposits which defy mechanical cutting tools, without any damage to underlying materials by correct selection of nozzles, accessories and power sources. the high pressure unit consists of the following:   high pressure reciprocating (simplex / duplex / triplex) pump. prime mover : electric motor / diesel engine. mounting : base plate / trolley / trailer. pulley set with belts and guard or coupling with guard. standard accessories : pressure gauge, pressure regulating valve, safety valve, strainer. cleaning accessories (optional)   interchangeable conversion kits are available for all pump units so that the pressure/volume relationship can be altered to suit a particular operation without altering the pump speed, thus maintaining efficient working of the drive motors.  

We, SRS Pumps are reputed manufacturers and suppliers of Metering Pumps, Dosing Pumps, Metering Pumps, Electromechanical Dosing Pumps, and Industrial Metering Pumps. These pumps are used where fluids must be dosed into a medium with a highest possible grade of accuracy with a defined volume and within a defined time period. The electro magnetic metering pumps are used in low pressure and low flow applications. The drive unit consumes less energy than motor driven pumps. The pump capacity is varied by both stroke length and speed controls. Functioning: These Dosing or Metering Pumps (oscillating positive displacement pumps) suck in a defined volume with the backstroke of the displacer and press it into the dosing line with the pressure stroke. Adjusting the stroke volume and the dosing strokes per time unit can regulate the metering capacity. FA series- Solenoid driven metering pumps are controlled by an Electronic circuit comprising of professional PCB & electronic components of proven quality for high reliability to the user. Features:   Glandless & leakage free diaphragm pumps Solenoid driven aided by professional Pulser circuitry Excellent proportional control with higher turn-down ratio Adjustable Injection Frequency ( upto 120 SPM) Adjustable Volume displacement via Stroke length Adjustment Corrosion resistant GFPP Housing Unique spacer design for prevention of Chemical entry to drive end Teflon faced Hypalon Diaphragm for long lasting service Liquid ends - Polypropylene (PVC/SS316/PTFE—as optional) Low power consumption Modular design occupying less foot print & light weight Suction lift upto 1.5 mWc Steady state accuracy: +/- 3% Repeatability : +/- 3%   Applications:   Chemical feed systems are most suitable for metering Sodium hypo chloride Flocculants Softeners Cleansing agents Acids Caustics   Range:   Capacity Up to 12 LPH Discharge pressure Up to 10 bar (kg/sq. cm) Stroke speed Up to 120 spm   Material of Construction:   Diaphragm : Teflon (PTFE) faced Hypalon. Pump Head (liquid End) : PP (Standard) / PVC / SS316 / PTFE as optional. Valves & Fittings : PP

In hydraulic pump the process liquid is isolated from plunger by hydraulic oil and a diaphragm. Normally Teflon is used as a diaphragm material due to its flexibility and corrosion resistivity. domestic and industrial diaphragm type dosing pumps, hydraulic diaphragm pumps, shaped diaphragm pumps and air-operated double diaphragm pumps.When the liquid being is highly corrosive, the backup diaphragm will keep the liquid out of pump body in the primary diaphragm, allowing the diaphragm to be replaced before the pump is damaged.

Double acting plunger pump is plunger type dosing pump which the working fluid acts alternately on both sides of the piston. This is one that, as it fills one end of the liquid chamber, is discharging liquid from the other end of the chamber. On the return stroke, the end of the chamber just emptied is filled, and end just filled is emptied. Each stroke of the piston fills one chamber and empties another, which nearly doubles the flow rate over a single-acting plunger pump. It also smooth in the flow and the basic principal of operation will be identical. This pump can be used for high precision injections with pulse rates of ±1%. Have you ever seen a pulseless metering pump? You’ve never actually seen a pulseless metering pump, even though you may have seen similar pumps. You might have seen a pulse reduction pump, which reduces the pulse with pump piping or a built-in air chamber. However, SRS Pumps has successfully developed actual pulse-less pump technology. In the belief that we coexist with our customers, we will show you true essence of Pulseless Pump. Features: Accurate & sophisticated dosing metering. Fixed & variable output choice. Leak proof in nature. Compact, sturdy design & long lasting. Low power consumption. High efficiency. Noiseless running. Virtually maintenance free. In built versatility to suit any kind of liquids. Abrasion resistant and corrosion resistant. Pump performance confirms API 675 international standard. Value for money. MOC: The liquid part can be offered in SS 304, SS 316, Alloy 20, Hastalloy, Cast Steel. The higher grade corrosion and fatigue resistance material is used as ‘PLUNGER’ to suit application.

SRS Pumps is a manufacturer of domestic and industrial diaphragm type dosing pumps, hydraulic diaphragm pumps, shaped diaphragm pumps and air-operated double diaphragm pumps. Hydraulic Diaphragm Pump: In hydraulic pump the process liquid is isolated from plunger by hydraulic oil and a diaphragm. Normally Teflon is used as a diaphragm material due to its flexibility and corrosion resistivity. Hydraulic diaphragm pumps are recommended for the applications where the leakage is not at all permitted. It provides an integral safety valve which can automatically protect the diaphragm while the fluctuation in the line. Shaped Diaphragm Pump: Shaped diaphragm pumps (Mechanically Operated Diaphragm Pump) without gland packing and hydraulic oil can be offered for dosing chemicals and other liquids. Here the shaped diaphragm is directly connected to the reciprocating mechanical parts from the connecting rod mechanism. Viton, Neoprene or Teflon faced rubber are working as a diaphragm material. Single Diaphragm Pumps: A single diaphragm separates the wetted area from the hydraulic chamber. During the discharge stroke the diaphragm is balanced by the hydraulic liquid only. Double Diaphragm Pumps: When the liquid being is highly corrosive, the backup diaphragm will keep the liquid out of pump body in the primary diaphragm, allowing the diaphragm to be replaced before the pump is damaged. Sandwich Diaphragm Pumps: It's two identical diaphragms mounted together and operating as one piece. Since either diaphragm is capable of full pump performance, each is the backup of the other. Should one fail, operation continues without interruption on the other, there is no leakage or air sucked into the process and no mixing of the process fluid with the hydraulic oil. A pressure gauge reading between the diaphragms monitors the diaphragm conditions, no pressure indicates the diaphragms are okay while pressure indicates that the pump is operated on one diaphragm."Sandwich" diaphragms have very long live years even in continuous operation. Liquid Ends: Liquid ends can be offered in S.S 304, S.S.316, Hastelloy B or C, Alloy 20, P.P, P.V.C, PTFE, Cast Nylon, Teflon and etc.Capacity Max - 15000 LPH.Pressure Max - 15 bar.  

SRS Pumps do design, manufacture and install the chemical dosing systems for petrochemical applications and water treatment plants. The chemical dosing systems where totally customized to fit customer's requirements and to ensure the maximum efficiency in chemical dosing required by the process for the specific application. We follow the international quality standards. We provide the skid mounted chemical dosing systems with qualitative range. Our quality engineers check each and every component according to the required quality specifications. We conduct trail process before shifting the chemical dosing system to the customers’s location. All the components are calculated as per the discharge pressure of the skid mounted dosing systems for safety precautions of the System. We can also supply the chemical dosing systems for following applications...   Chlorine dosing system, Boiler chemical dosing system, Oil heating system, Additive Injection System, Slurry dosing system, Alcholic Dosing System, Blue dye injection system, Perfural dosing system, Marker dosing system, Bio-diesel blending system, PH Level control dosing system, Pumping units and other such duties.   Dosing system are designed to meet the need for accurate and precise dosages for chemical and water treatment plants. It uses the best vailable metering pumps which may have a higher price than that of a competitor, but the true cost of owning a these pumps must take into account with the life expectancy of the entire system and its key components, the frequency of repairs, the cost of repairs and downtime, the cost of labor, and the energy consumption of the system, the spares to be maintained. The diaphragm is made of high quality raw-materials. The body is made of SS, PVC or polypropylene, suitable for most chemical and water treatment applications. Other materials such as acrylic and teflon can be provided depending on the liquid to be dosed. The Chemical Dosing System consists of a solution tank, pumps and accessories. Please contact us for more information about the chemical dosing systems.  

We provide the skid mounted chemical dosing systems with qualitative range. Our quality engineers check each and every component according to the required quality specifications. We conduct trail process before shifting the chemical dosing system to the customers’s location. All the components are calculated as per the discharge pressure of the skid mounted dosing systems for safety precautions of the System. We can also supply the chemical dosing systems for following applications Chlorine dosing system, Boiler chemical dosing system.

The chemical dosing systems where totally customized to fit customer's requirements and to ensure the maximum efficiency in chemical dosing required by the process for the specific application. We follow the international quality standards. We provide the skid mounted chemical dosing systems with qualitative range. Our quality engineers check each and every component according to the required quality specifications. We conduct trail process before shifting the chemical dosing system to the customers’s location. All the components are calculated as per the discharge pressure of the skid mounted dosing systems for safety precautions of the System. We can also supply the chemical dosing systems for following applications...

srs pumps is a manufacturer of domestic and industrial dosing pumps. It offers centrifugal pumps and mono-block centrifugal pumps with the following specifications capacity range : up to 80 mtr3/hrhead range : up to 60 mtrselectrical motor : 0.5 to 25 hpsealing arrangement : gland/mechanical sealmaterials of construction : all pumps are cast iron, i.e., pump casing, impeller, gland cover, bearing cover, bearing housing. however these pumps can also be supplied in different materials of construction like bronze impeller/ss, all parts in ss, etc. applications:   acids, alkalis industries, chemical injections, chemical feed systems, for pumping clear or turbid water up to 3000 ppm; ideally suitable in circulating systems in chemical industries, irrigation, sprinkler system, booster service, fire fighting, air conditioning, oils, pumping liquids having temperature in the range of -10 to 100 deg.   liquids handled:   different chemical / water according to materials of construction.   types of centrifugal pump:   back pullout type centrifugal pumps monoblock centrifugal pumps metallic and non metallic transfer pumps   these pumps are single stage, end suction, horizontal centrifugal pumps. Design confirms to din 24255 / iso 2858 process pumps. Flanges as per din2533. Drilling as per asa/bs.

SRS Pumps is a manufacturer of domestic and industrial dosing pumps. It offers centrifugal pumps and mono-block centrifugal pumps with the following specifications,Materials of construction : all pumps are cast iron, i.e., pump casing, impeller, gland cover, bearing cover, bearing housing.However these pumps can also be supplied in different materials of construction like bronze impellerSS, all parts in SS, etc.