Stainless Steel Dealers in Kamathipura, Mumbai

• Type: Duplex Steel Flanges
• Material: Duplex Steel
• Shape: Round
• Thickness: 1mm
• Feature: Corrosion Proof, Excellent Quality, Fine Finishing, High Strength
• Finishing: Polished

Manoj Steels is simply Supplier in india who maintains EN 1.4462 Tube all told Schedule like Schedule 5, Sch 10, Sch 40, Sch 80. widest stock of Duplex stainless steel S31803 Tube in india enable us for prompt delivery to near by countries like UK, Dubai-UAE, Kuwait, Qatar, Saudi Arabia , Turkey, Israel, Iraq, Iran, Oman, Bahrain, Nigeria, Kenya, South & geographic area, Indonesia, Malaysia, Singapore, Thailand & Philippines in any emergency.we can offer 2205 Duplex Tubing at dealer price which helps us to prove one of the best Stockholder of 2205 Duplex Stainless Tubing, EN 1.4462 Seamless Tube in India.If you're looking for 2205 Uns S31803 EN 1.4462 Duplex Tube Suppliers India & UK then we will help. Check our range of Duplex 2205 Tubing now - we supply all of the India, Africa, Malaysia, UK, Europe. Raajsagar Steels is Manufacturer of Duplex Steel Tubes in India, We are one amongst the biggest Duplex Tubes distributor in India. Contact us! imported bonded. quality assurance. good after-sales service. fast delivery. Highlights: Providing Safe And Reliable Products, Providing Professional Solution, Fast Response, Highly Experienced Team Available.1.4462 / AISI 318 LN is a duplex austenitic-ferritic chromium-nickel-molybdenum stainless steel. 1.4462 belongs to the DUPLEX-family. This grade contains a good resistance against pitting and stress corrosion cracking. Unique combination of corrosion resistance, resistance to fret corrosion cracking , high tensile and yield strength.

Stockiest & suppliers, importers & exporters of carbon steel, stainless steel, alloy steel, pipes & tubes, sheet, plates, bars and largest manufacturer of pipe fittings.

Stainless Steel 304 304L Outlet Fittings We are also manufacturer, supplier and exporter of SS 304304L Outlet Fittings & Branch Connection Fittings as per customers drawing or specification. Outlets fittings or Branch Connection Fittings (also known as O'lets) are fittings which provide an outlet from large pipe to a smaller or same size. The main pipe onto which the connection is welded is usually called the RUN or HEADER SIZE. The pipe to which the Connection provides a Channel is usually called the Branch or Outlet Size. Branch connections are ilike SOCKET WELDING, THREADING & BUTTWELDING ENDS. MSS-SP-97 Standard Practice covers essential dimensions, finish, tolerances, testing, marking, material and minimum strength requirements for 90 and 45 degree integrally reinforced forged branch outlets fittings of buttwelding, socket welding and threaded types. Specification : Standards Designation ASTM A403 A182 stainless steel 304 304L Outlet Fittings � Sweep Outlets � Threading Outlets � 90 Deg Outlets � Welding Outlets � Socket Weld Outlets � Latrolet � 45 Deg Outlets

• Grade: SS304
• Material: Stainless Steel
• Shape: Round, Square etc
• Color: Silver
• Finish: Polished
• Feature: High Strength

Supreme steel industries produce Stainless Steel-416 that is a martensitic, free-machining, chromium steel alloy that is generally considered to be the first free-machining stainless steel. It has the highest machinability of any stainless steel at about 85% of that of a free-machining carbon steel. Martensitic stainless steels were designed to be hardenable by heat treatment and also corrosion resistant.

Etched mirror sheets in stainless steel 304 grade used in elevators, interiors, wall clading & exterior.

Our clients can avail from us a comprehensive range of Stainless SteelPlates that are manufactured in line with the prevailing industry standards. These plates can be availed in different grades like austenitic, duplex, martensitic and ferritic. Furthermore, the stainless steel plates offered by us can be provided in 3 mm to 100 mm thickness and 1000 mm to 3200 mm width. The length of these plates can be custom-made in 2438 mm/3048 mm/6096 mm and 13500 mm. Grades: Austenitic, Duplex, Martensitic, Ferritic ● Surface: No.1 Finished ● Thickness: 3 mm to 100 mm ● Width: 1000 mm to 3200mm ● Length: 2438 mm / 3048 mm / 6096 mm to 13500 mm ● All Grades : Austenitic, Duplex, Martensitic, Ferritic ● Special grades : 310S, 309S, 317L, 904L, Duplex 2005, 230 ● Stainless Steel Plates Prime Materials - ASTM A240/ASME SA 240, NACE MR 01 - 75, EN 10204 3.1 ● Coil, Sheet and plate dimension (in mm)

We take the liberty of introducing ourselves as one of the leading manufacturers and supplier of duplex stainless steel in india.

Metal Trading Corporation has been in the business of the Stainless Steel for the last 35 years. Recently we have added special grades like SS 904L duplex 2205 / 31803 Super duplex 2507 / 32750. We have been continuously upgrading inventories to suit the changing requirement of industries. 

We are a famous exporter and supplier of Duplex Stainless Steels based in Mumbai, Maharashtra. These steels have a high strength and a greater resistance to corrosion particularly stress corrosion and cracking. We offer this product in different qualities or grades. These steels are used in various processing plants, hot water tanks and much more. Our wholesale prices on this product are unbeatable. Details :Duplex stainless steels are becoming more common. They are being offered by all the major stainless steel mills for a number of reasons Higher strength leading to weight saving Greater corrosion resistance particularly stress corrosion cracking Better price stability Lower price There is a conference on the subject of duplex every 2-3 years where dozens of highly technical papers are presented. There is a lot of marketing activity surrounding these grades. New grades are being announced frequently. Yet, even with all this interest, the best estimates for global market share for duplex are between 1 and 3%.The purpose of this article is to provide a straightforward guide to this steel type.   Grades : Duplex Grades Duplex 31803 Super duplex s32750 Super duplex s32760 Lean duplex s32304 6 molu s31254 Zeron 100.   Principle of Duplex Stainless Steels : The idea of duplex stainless steels dates back to the 1920s with the first cast being made at Avesta in Sweden in 1930. However, it is only in the last 30 years that duplex steels have begun to “take off” in a significant way. This is mainly due to advances in steelmaking techniques particularly with respect to control of nitrogen content. The standard austenitic steels like 304 (1.4301) and ferritic steels like 430 are relatively easy to make and to fabricate. As their names imply, they consist mainly of one phase, austenite or ferrite. Although these types are fine for a wide range of application.   Technical Weaknesses Austenitic – low strength (200 MPa 0.2% PS in solution annealed condition), low resistance to stress corrosion cracking Ferritic – low strength (a bit higher than austenitic, 250 MPa 0.2% PS), poor weldability in thick sections, poor low temperature toughness In addition, the high nickel content of the austenitic types leads to price volatility which is unwelcome to many end users. The basic idea of duplex is to produce a chemical composition that leads to an approximately equal mixture of ferrite and austenite. This balance of phases provides the following: Higher strength – The range of 0.2% PS for the current duplex grades is from 400 – 550 MPa. This can lead to reduced section thicknesses and therefore to reduced weight. This advantage is particularly significant for applications such as Pressure Vessels and Storage Tanks Structural Applications e.g. bridges Good weldability in thick sections – Not as straightforward as austenitics but much better than ferritics. Good toughness – Much better than ferritics particularly at low temperature, typically down to minus 50 deg C, stretching to minus 80 deg C. Resistance to stress corrosion cracking – Standard austenitic steels are particularly prone to this type of corrosion. The kind of applications where this advantage is important include Hot water tanks Brewing tanks Process plant Swimming pool structures Characteristics Twice design strength of austenitic and ferritic stainless steels Wide range of corrosion resistance to match application Good toughness down to minus 80 deg C but not genuine cryogenic applications Particular resistance to stress corrosion cracking Weldable with care in thick sections More difficult to form and machine than austenitics Restricted to 300 deg C maximum .

UNIFIT METALLOYS INC are leading Stainless Steel A2 70 Bolts Manufacturers in Saudi Arabia, India, Nigeria. At UNIFIT METALLOYS INC, an important emphasis is laid on ensuring of service delivery and quality. With the objective of providing the best quality products to our customers and partners, all our products undergo rigorous testing and quality check processes.   Types Industrial Bolts: Stainless Steel Stud bolts, Stainless Steel hex head bolts, Stainless Steel socket hexagon head screw anchor bolts, Stainless Steel u-bolts, Stainless Steel j bolts, Stainless Steel mushroom head square neck bolts, Stainless Steel t- head bolts, Stainless Steel wing screw bolts, Stainless Steel eye bolts, Stainless Steel eye bolts, Stainless Steel foundation bolts, Stainless Steel structural bolts.   UNIFIT METALLOYS INC exports Stainless Steel A2 70 Bolts Manufacturers in Saudi Arabia, India, Nigeria, UAE, Kuwait, Qatar, Oman, Iran, United States Of America, United Kingdom, Australia, South Africa, Mexico, Turkey, France, European Union, New Zealand, Bahrain, Oman, Yemen, Lebanon, Spain, Indonesia, Malaysia, Lebanon, Iraq, Iran, Egypt, Madagascar, Sri Lanka, Denmark, Poland, Italy, Brazil, Singapore And Netherlands.

We vibrant steel industries, very much pleasure to introduce our self as one of the largest and leading importer, stockiest and supplier of industrial raw materials to various well know companies all over india. Product details. Stainless steel: astm 304, 304l, 304h, 316, 316l, 316h, 316ti, 321, 321h, 317, 317l, 310, 310s, 409, 410, 430 etc. Nickel alloy : 17-4ph , monel 400 & 500, inconel 60..0, 601 & 625,718 incolloy 800 & 825, hestolly a to x titanium gr.1 & gr. 2 duplex f51, super duplex f55 etc. Nitronic 50 and nitronic 60 rods . Available shape : pipes, tubes, bars, sheets, plates, wire, circles and pipe fittings. Tubes & pipes (seamless) up to 24 tubes & pipes (erw) up to 30 sheet/ plate up to 150 mm. Rod/ bar up to 350 mm circle up to 1000 & above as per your requirements. Thickness up to 200 mm & above as per your requirements . if u have any current requirement please do let us know we would like to give you our best offer. Looking forward to receive your valuable enquiries

Unlike 304L, Type 304H has a higher carbon content making the steel more suitable for use in applications where elevated temperatures are present. It is an austenitic chromium-nickel steel alloy and the greater carbon content delivers an increased tensile and yield strength. The material is recommended for use in ASME pressure vessels in working service above 525 °C due to the grade’s heat resistant properties. Benefits of using 304H Stainless Steel Higher carbon content gives the material greater heat resistant qualities Higher tensile yield strength Greater short and long term creep strength 304H alloy is commonly found in the oil refining, gas and chemical industry and is used in industrial boilers, pressure vessels, heat exchangers, pipelines and condensers. The material is also used throughout the power generation industry.

We have fermonic 50 high strength annealed stainless steel our own variant of xm19 is offered in a high strength option with a 100 or 120 ksi proof strength, this is achieved through warm or cold working, fermonic 50 high strength differs from xm-19 hs as these properties are maintained across the size range up to 10 inch dia., where standard xm-19 50 high strength properties are lost by 3 inch dia. Fermonic grades remains non magnetic even when.

• Thickness: sch 10,40,80,160
• Steel Grade: 304,304l,316,316l,317l,310

Ready stock of Stainless steel Seamless pipe TP Grade 304 ,304L,316,316L,317L ,310,32205,32750 size:- 12" NB to 8"NB in Sch 10s,40s,80s

• Range :: 0.1 mm to 16 mm thick, Width in 1000mm / 1250mm / 1500mm / 1800mm / 2000 mm width x Coil Form. as well as Sheet & Plates.
• Stainless Steel: ASTM / ASME SA 240 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 ,
• Duplex Steel: ASTM / ASME SA 240 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760.