Steam Boiler Dealers in Ghatkopar, Mumbai

Our company has established itself as a leading manufacturer, trader and supplier of superior quality Portable Steam Generators. In these generators, steam is withdrawn from the drum, leaving a reservoir of heat saturated feedwater. Because of its relatively low water content, this steam generator is smaller, lighter, and faster in responding than a comparably rated fire tube boiler.

• Material: Stainless Steel
• Weight: 100-1000kg
• Driven Type: Fuel
• Warranty: 1year
• Gauge Thickness: 15-20mm
• Automatic Grade: Semi Automatic

Pure Steam Generators exploit a competent evaporation column, thereby giving the highest quality Pure Steam. In addition, when assessment or preservation is required, the components are readily accessible with no need to eradicate or disassemble any of the major components to access the critical areas.Pure steam generator is ideal in sterilization of pipelines, tanks,fermentors etc. It is also suitable for humidification of sterile areas where pure steam is required.

We offer Clean Steam Generator. Application:- Clean steam is getting used for sterilization in autoclaves, pipeline, tanks & Fermentors and disinfection. It is also getting used for re-humidification of sterile areas & preparation of pure quality water for medicinal & general purpose washing & cleaning use in Pharmaceutical, Bio-Technology, Hospitals & allied industries.

• Capacity: 3 kg/cm2 at 143°
• Electricals: Main supply A.C., 415V, 3 phase/50 cycles, Max, load 3kw. Air: 1 cfm at Kg/cm2 gauge.

Pure Steam Generator for pharmaceutical & Biotech Industries to produce pure Pyrogen free sterile steam for Sterilization in autoclaves, Pipeline, Tanks.Complete with all contact parts in S.S 316Lq and non contact parts in S.S 304 q complete with column-1 No. Pre heater-2 Nos., S.S stand, all piping connection will be sanitary triclover fittings, Sumo make pump for feed water, Flow meter, S.S panel.Control Panel (S.S 304) with boiler steam & pure steam Temperature indicator, conductivity indicator for incoming feed water.The feed water & the cooling water should be of Dematerialized quality pass through filter, Cation, Anion & Mixed bed Exchanger to get minimum dissolved solids (T.D.S) & hardness.

Type : Three pass horizontal, smoke tube, fully wetback, packaged boiler, conforming to the latest revisions of Indian Boiler Regulations. (IBR) Capacity : 1000 to 25000 kg/h F & A100º C Working Pressure: 10.54 / 14.5/ 17.5kg/cm2 (g) and above. Fuel : LDO / FO / Gas / Dual Fuel (Oil cum Gas) Thermal Efficiency : 88 ± 2 % without heat recovery unit and 92 ± 2 % with heat recovery unit based on NCV of fuel oil. Burner : Fully automatic pressure jet (high - low / stepless modulation ); indigenous / imported burners. The combustion chamber (furnace) forms the first pass in which the fuel is atomized, combusted and radiant heat transmitted to the water contained in the shell, submerging the furnace, reversing camber and smoke tubes. The hot flue gases are diverted through the internal reversing chamber (wetback) and subsequently to the second and third pass of tubes transferring the convective heat to the boiler. The boiler is of Class 1 fusion-welded construction. Burner & Boiler Controls The burner programmer ensures an automatically controlled programme for start-up, firing, shutdown and restart of the boiler based on measurement of boiler pressure. Necessary interlocks are provided for safe operation. The water level is controlled through Mobrey type dual controller which is a magnetically operated water level controller of vertical type in a float chamber and is externally mounted on the boiler. One switch of the dual controller operates the electric feed pump on/off. The second switch cuts out or locks out the burner in case of low level of water and at the same time operates a low level alarm. The boiler is provided with one high pressure cutout switch and one additional pressure switch for high/low, or continuous modulation of operation. Salient Features MAXITHERM has adopted the modern concept of eccentrically located furnace with smoke tubes arranged in a staggered manner on one side of the furnace. The front and rear tubes and the furnace are accessible for inspection and maintenance. Generously proportioned furnace with large furnace volume ensuring; Maximum possible absorption of radiant heat. Avoidance of flame impeachment on the rear of the furnace. Prevention of clinker formation. Enhanced life of furnace. Adequate water and steam spaces enable the boiler to meet fluctuating loads with out appreciable fall in the operating pressure. This also ensures prevention of priming, foaming and carryover of the boiler water into steam pipelines and further ensures steam with high dryness fraction. The eccentrically located furnace has the following advantages :- Easy accessibility to the outer surface of furnace for inspection and scale removal. Possibility of providing single smoke box, which when opened makes all smoke tubes accessible for cleaning. The burner is mounted directly in font of the furnace, facilitating opening of the front door to clean the tubes without disturbing the burner.

pure steam generator, Pharmaceutical Equipments, Rectangular Sterilizer

SALIENT FEATURES • Low intial & operational cost. • Beyond perview of IBR • Steam at full pressure in two minutes of cold start. • No explosion Hazard • High efficiency 5 pass design. • Space saver - vertical package unit. • Dependable parts, longer life • Easy trouble free operation • Smokeless combustion • Peak-efficiency at even part loads. • Wide temp. setting range • Inbuilt HRU & HRU bypass duct.   CONTROLS • Electrical control pannel box mounted on the boiler cell consists of contactors, relays and cut outs for blower, feed water pump and fuel pump. Burner programmer prepurging timer, ignition transformer, indicating lamps, temperature controler, pressure gauges, High & low pressure switches, mannualcontrol switches and power ON/OFF main switch   SAFETY • Boiler shuts down giving an audio visual alarm in the event of low pressure high outlet temperature, low liquid level, erratic flame or flame failure.   BURNER • Fully automatic down fire forced draught pressure jet ON/OFF control with audio visual alarm device in the event of flame failure or safety lockout.

• Power: 4.5 To 18 kw
• Brand Name: Benito
• Phase: Single Phase
• Application: Home
• Model: For Spa Center, Gym & Hotel Use

Steam Generator, Steam Iron, Electric Boiler

pure steam generator, Automatic tablet coating machine, tablet punches

Steam Turbine Generatorsteam Turbine Generator, Power Plant Equipment

electrical & mechanical contractor, generators spare parts, Water Softners

Hot Water Generator, Pollution Control Equipment

pure steam generator, Benchtop Lyophilizers, Dry Heat Steam Sterilizer

Steam Boilers

Steam Boilers, solid, liquid, gas, composite, co generation systems

Thermic Fluid Heater, Hot Water Generator, Air Heaters, Industrial Pumps