Steam Cleaning Equipment Dealers in Subhash Nagar, Mumbai

We offer a wide range of double interlock and square lock Flexible Hose Pipes that are fabricated by spirally winding a preformed metal strip over a mandrel. These can be supplied with packing or without packing as per the requirements of our valued clients that are spread across the world. Our range is available in different sizes, lengths and end fitting configurations. These are manufactured in GI & stainless steels. Features:Sturdy makeHigh resistance against corrosionCustomized designsLonger life Apllication Sugar IndustryHeavy Machinery IndustryPharma IndustryChemical IndustryDairy and Foodgrade Industry

• Hydraulic pressure: 230 bar
• Hydraulic flow: 65 lpm
• Engine power: 20 Hp
• Dimensions: 1060mm x 760mm x 850 mm
• Weight: 145 kg

CH20 is a series of hydraulic powered high-pressure water-blasters from 350 to 500 Bar and 16 to 23 L/min in flow capacity. The machine are with pneumatic rear wheels with parking brake, castor front wheel. The frames are made up in hot-dip galvanized and powder coated pressed sheet metal parts with all enclosing side frames in stainless steel. It measures 1060 x 760mm and 850mm high. One central lifting eye.

• Machine Weight: 3000-4000kg
• Pressure: Low Pressure, Medium Pressure
• Overall Length: 65mm
• Speciality: Rust Proof, Long Life
• Usage: Rust Removal, Rust Cleaning
• Size (mm): 200mm
• Overall Dimension: 580x360x385mm

• Type: Herbal
• Application: Floor Cleaning
• Shelf Life: 1 Year
• Color: Green
• Packaging Type: Plastic Bottle
• Form: Liquid
• Packaging Size: 1ltr

• Pack Type: Plastic Bottle
• Pack Size (litres): 500 ml & Refill pack 5 Ltr Can
• Brand: Differ
• Features: Accurate composition, Safe to use, Diversely affective.

• Brand Name: PROFESSIONAL HIGH PRESSURE WASHERS
• Brand Name: Bosch
• Power: 2400 Watt
• Pressure: 160 Bar
• Usage/Application: Commercial Buidling | Industrial Place | Car & Truck
• Model Number: GHP 5-65
• Weight: 23.5 Kg
• Warranty: 6 Months
• Country of Origin: Made In India
• Flow Rate: 480 L/h (8 L/min)
• Temperature: 50 DegC
• Hose length: 5 Metre

An Ultrasonic Bath is a cleaning device that uses ultrasound to clean delicate items. The ultrasound can be used with just water, but use of a solvent appropriate for the item to be cleaned along with the soiling enhances the effect. In this Ultrasonic Water Bath, cleaning normally lasts between three to six minutes, but can also exceed 20 minutes depending on the object to be cleaned. We ensure that the Ultrasonic Water Baths are delivered to the customers on time.

• Min - Max air pressure: 3.0 Bar (45 psi) - 6.3 Bar (95 psi)
• Air consumption: 180 liters per minute at max RPM (6,3 CFM)
• Cleaning speed with standard air motor: At 3 Bar (45 psi) 45 cm/s (18" per second) At 6.3 Bar (95 psi) 70 cm/s (30" per second)
• Cleaning speed with slow air motor (optional): At 3 Bar (45 psi) 14 cm/s (5,5" per second) At 6.3 Bar (95 psi) 19 cm/s (7,5" per second)
• Min - max flex lance outside diameter: 1 LTC : 8 - 12 mm (,314 - ,477") XLTC : 11 - 15 mm (,433 - 590")
• Max. pull / push strength: Max. pull / push strength

High Pressure cleaning of heat exchangers has never been this easy and safe! Excellent cleaning results due to consistent speed and front and back cleaning. The weight is only 8,5 kg (19 pounds) and pays for itself immediately because it greatly increases both productivity and operator safety. The operator uses the 1-LTC by positioning the nozzle end against the tube to be cleaned. The operator manipulates the simple controls to retract or extend the high pressure hose, at the appropriate speed, into the tube while applying water pressure. The 1-LTC conveys the hose using polyurethane friction blocks mounted within the assembly. The speed and pressure of the 1-LTC can be varied according to the hose being used and the contamination inside the tubes. The consistent speed both backwards and forwards delivers excellent cleaning results in the shortest time possible. The standard single lance machine is most suitable for 42 and 52 (DN 4 and 5) or 116" and 18" flex lances.

The Ultrasonic Punch & Die Cleaning Machine offers effective and consistent cleaning without manual intervention. Even the most delicate part of the punch, i.e. the tip, is cleaned of all the deposits without risk of deterioration. Difficult areas like intricate embossing and inside of die are cleaned with same efficiency. It also reduced chances of damage as manual handling is minimised. The cleaning time per set is just about 1:20 minutes. Punches and dies are accommodated on specially designed fixtures. These are then passed through 4 stages: Ultrasonic cleaning Ultrasonic rinsing Drying Rust Prevention     If the punches are to be used after cleaning then the rust prevention stage can be avoided. The machine is  Semi Automatic with Manual Loadingalso available in: Table Top model

BOSS high-pressure washers have been developed with the aim of removing stubborn dirt under tough working conditions. Efficient cleaning results are achieved using high flow rates and high pressure.It is a mechanical sprayer that sprays water at very high pressures in gallons or liters per minute. It produces a pressure 500 to 3,000 psi.Boss high pressure washer comes with a regulator to control the pressure

• Country of Origin: India
• Type: Degreaser
• Brand Name: Ecochem
• Application: Industrial
• Weight: 5
• Usage: Industrial
• Size: 5 litre

Eco-Green Kleen is a high-performance cleaning solution for the toughest stain such as grease, oil, paint, and chemical stain. Its 100 % green formulation gives the option to the user to eliminate this tough stain safely. Green-Kleen gives an Excellent Cleaning Result. Highly recommended for all Factories, Industries & Dairy Food Processing Plants flooring which removes oil, minerals, and grease from the surface

• Power: :
• Parameter                           Description: Suction Capacity
• :: 300 C.F.M. (500 m3 / hr) at 125 mm W.G.
• Filtration Area: :
• 0.36 m2per bag.: No of filtration bags
• :: 6 nos.
• Dust Storage Capacity: :
• 40Ltrs.: Inlet Manifolds (Six)
• :: Dia 50 mm – 02 Nos. Dia 38 mm – 4 Nos.
• 2 HP / 2880 RPM / 3 Phase / 440 V / 50 Hz: Overall Dimensions
• :: 600 x 780 x 1500 H
•  :  

• Type: Component Cleaning Machines
• Weight: 100-1000kg, 1000-2000kg
• Color: Brown, Light White
• Voltage: 110V, 220V, 380V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw
• Warranty: 1year, 2years
• Driven: Electric, Hydraulic

• Feature: Designed for heavy duty & long hours of continuous usage, Star shaped filter enables High filtration area .

• Model:    CB-450
•    Voltage:    220V-240V
•    Power:    1180W
•    Operating Width:    450mm
•    Dry Motor:    220VAC/100W
•    Roll Brush Motor:    24VDC/120W
•    Capacity:    20L
•    Cable:    12m
•    Weight:    34kg

This Dust Collector is specially made for the Blister Packing during the packing of un-coated tablets.It’s used for collecting loose powder from capsule polishing chamber.  

industrial ultrasonic cleaning machine, Ultrasonic Machine

Ultra sonic cleaner Description Digital ultra sonic cleaner,for effective cleaning of dental instruments. Tankmaterial made up of stainless steel Ultrasonic frequency to almost 42,000hzAvailable in different sizes.