Steel Bars Dealers in Goregaon East, Mumbai

We are one of the leading Manufacturers and Suppliers of an exclusive range of Steel Round Bars, which are widely used in a large number of industries. Fabricated using A-grade raw materials, our Steel Round Bars are highly durable and long lasting. Features Precise roundnessExcellent QualityDimensional Accuracy Range : 12 mm to 38 mm diameter

We are involved in offering a wide range of Flat Steel Bars to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.We introduce ourselves as an eminent trader and supplier of an extensive array of  Flat Steel Bars. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.Features: Sturdy design Highly durable Application specific design 

• Sizes Diameter: 8mm to 200mm

The Mild Steel Round Bar that we bring forth for our clients ensure durability, strength and high resistance to rust & corrosion. We manufacture these Mild Steel Round Bars using finest quality raw material. Made available in various dimensions as per the requirements of clients, our products effectively cater to their specific demands. Owing to the quality of our MS round bars, we are counted among the prime MS Round Bars suppliers of the industry.» Features :• Corrosion resistant• Precisely engineered• Made using optimum quality mild steel• Reckoned for durability• Fine finish• Excellent polish• Dimensional accuracy• Available in various sizes, dimension and material grade   Specifications :-

• Type: Stainless Steel Bars
• Material: Stainless Steel
• Shape: Rectangular, Square
• Thickness: 1-100mm, 100-200mm, 200-300mm, 300-400mm, 400-500mm
• Length: 1-1000mm, 1000-2000mm, 2000-3000mm, 3000-4000mm, 4000-5000mm
• Application: Construction, High Way, Industry, Subway, Tunnel
• Color: Black, Grey, Silver
• Width: 1-50mm, 100-150mm, 150-200mm, 200-250mm, 50-100mm
• Technique: Cold Drawn, Forged, Hot Rolled
• Dimension: 1-500mm, 1000-1500mm, 1500-2000mm, 2000-2500mm, 500-1000mm
• Special Use: Cold Heading Steel, Free Cutting Steel, Mold Steelq, Valve Steels

• Application: Automobile Industry
• Shape: Round bar, Square bar and plate
• Material: Steel
• Thickness: 6 mm
• Alloy: Yes
• Finish: Coated
• Precision: 12 mm
• Min Diameter: 20 mm
• Max Diameter: 300 mm

• Grade: Mild Steel and EN 8
• Sizes: 8mm: 160mm

• Color: White, Blue
• Brand Name: Sf
• Size: 19 mm to 1000 mm
• Material: PTFE  

Being the leaders in the industry, we present PTFEHollow Barto our broad client base. It is flexible and there is no grease required for cone to socket gripping. This product is available in different sizes and is manufactured using premium grade raw material sourced from known and reliable dealers.   We are available in all PTFE Hollow Bar 100 % virgin. Product Range:• 15 % - 25 % Glass filled PTFE• 25 % - 30 % Carbon filled PTFE• 15 % - Graphite PTFE• 40 % - 60 % Bronze filled PTFE.

We are offering a wide range of SAE 8620 Steel Round Bars. It is a low alloy case hardening steel which is supplied to American standards SAE 8620 and AISI 8620. 8620 can be carburized, which will achieve a tough core with a hard wear resistant case. 8620 provides a combination of toughness and wear resistance. 8620 is supplied in either the as rolled or annealed condition for subsequent case hardening.Chemical Composition:Composition C Si Mn Cr Mo Ni P% 0.18-0.23 0.15-0.30 0.70-0.90 0.40 - 0.06 0.15 - 0.25 0.40 - 0.70 0.04 Max 0.03 MaxSpecifications:Shape: RoundDiameter: 20 mm to 300 mmApplications:Components of small cross section, requiring low tensile strength, as well as heavy forging in the normalized condition for automotive & general engineering such as axles, clutch shafts, presses & Punches Parts, Piston rods & gear rods.

We are offering stainless steel bright bars. bright bars: facilities: • annealing • peeling • straightening • centreless grinding • polishing • cutting annealing: we are equipped with electric annealing furnaces of proven quality & adequate capacity. The process is extremely controlled which softens the steel to improve machinability & relieve internal stresses induced during previous operations. (rolling, forging etc) pre straightning: the raw material is straightened before being peeled in order to maintain the accuracy of peeling. If the raw material is not found up to the desired standards, it is not allowed to pass to the next stage. peeling: in this stage, the straightened raw material passes through the peeling machine and is peeled as per the required size by a cutter made out of tungsten carbide. The rotary motion of the cutter ensures accurate and even peeling of the raw material. post straightning: the material is now re-straightened to make it ready for precise centreless grinding. centreless grinding: the straightened peeled bars are accurately grounded within tight specified tolerances. cut to length: the finished ground bars are cut according to customer’s requirement using horizontal band saw machines. inspection: the finished material is checked for size tolerance, straightness, length of bar, mechanical properties, surface defects, out roundness, ndt for surface cracks, & packing standards. For ensuring the quality at every step, well equipped laboratory is in place with ultra-modern equipments. Well-documented procedures ensure correctness in testing and certification of the products. material handling is done with forklifts, mobile cranes and eot’s that are available for trouble free easy material handling purpose. Precise digital weighing machines are used for weighment. bright bars made out of stainless steel: bright bars are made from stainless steel grade aisi 420 having following material composition:- a. carbon , c – 0.16 % b. manganese , mn – 1.0 % c. silicon , si – 1.0% d. chromium , cr – 12 – 14 % e. sulphur , s – 0.030 % f. phosphorous , p – 0.030 % balance is iron (fe)

Stainless Steel Bar, alloy steel, Die Steel, Industrial Tools

Mild Steel Bars, Reinforcement Bar, reinforcement tmt bar, tempcore rebars

Carbon Steel Threaded Rods, Metric Threaded Rods, Fully Threaded Rods

Carbon Steel Bar EN 8, Forged Round Bars, P20 1.2738 P20 Ni Mould Steel

Tor Steel Bars

Hot Rolled Bars, Cold Rolled Steel, Iron, cold rolled bars, steel Products

Steel Bars, Steel pipe

Steel & Steel Products, Jeans, organic long pepper, Mace Siaw, Chrome Ore

Ms Bars, Brahmi Leaves, Black Tulsi Plant, Fresh Organic Mushroom

hexagonal bars, Billets, Stainless Steel Angle, Stainless Steel Beam

Mild Steel Channels, galvanized barbed wires, Binding Wire, TMT Bars