Steel Springs Dealers in Mumbai

• Country of Origin: India
• Material: Stainless Steel
• Finishing: Polished
• Thickness: 0.5-1mm
• Length: 100-200mm

We guarantee to deliver a flawless array of products to the clients and for this; we store the entire lot under safe conditions in our capacious and well-structured warehouse. Keeping in consideration the latest standards, we are involved in supplying only high quality Stainless Steel Expansion Springs at reasonable prices. Expansion Springs / Breather Spring : MPI Expansion Springs 4" are stainless steel Type 304 flat expansion springs used to secure insulation over small diameter insulated piping, tanks, vessels, and equipment subject to expansion and contraction. They can be used with any common width of strapping up to 3/4"Application : Chil-spring /Expansion springs are simply attached to strapping with stainless steel wing seals. The strapping is slipped through the seal and then through the spaced opening at either end of the Chil-spring. The strapping is then bent back and the wings of the seal are flattened. Strapping is then extended completely around the insulated object, or to the next spring, and the same routine is repeated until the entire circumference has been encircled. Maximum expansion of the 4" spring should not exceed 2-1/2" beyond its original length; it is recommended that each spring be stretched 1/2" upon installation. This allows an additional 2" expansion capability per spring. The number and size of CHIL-SPRING / Expansion springs to be used should have an Expansion capability of at least twice that of the expected expansion of the object. Extreme care should be taken to assure that stresses are evenly distributed around the insulation

• Application: Industrial
• Material: Stainless Steel 304
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other

We are engaged in manufacturing and exporting an excellent range of Stainless Steel Springs. These springs are used to reduce vibrations and jerks in various areas like Transmission Towers Erection, Railways, Automobiles, Electrical and in many other engineering applications. These springs are offered by us in a variety of sizes, widths and lengths to befit the requirements of our clients.

For the convenience of the clients, we facilitate them with several payment procedures including both online and offline. In addition to this, we guarantee for authentication and confidentiality. Ours is a well-established organization that is located in Mumbai(India) and involved in catering to the customers based within and outside the boundaries.

• Country of Origin: India
• Type: Mild Steel Springs
• Material: Mild Steel
• Thickness: 0.5-1mm
• Length: 100-200mm
• Application: Electricals Fitting
• Grade: 202
• Color: Silver
• Feature: Excellent Quality, Fine Finishing, High Strength
• Finishing: Non Poilshed, Polished, As Per Requirement
• Load Type: Compression
• Application: For Electrical fittings and product requirement

Product details: Dimension Customized Usage Domestic, Industrial, Garage Brand Prashaant Steel Color SILVER Minimum Order Quantity 100 Piece   Product description: Prashaant Steel are engaged in manufacturing and supplying a wide range of Stainless Steel Springs. We provide customers with compression springs in different size and dimensions. High-grade stainless steel is procured from trusted vendors for manufacturing these springs. These are built to offer resistance to forces of twist or rotation.Features: Reliability Durability  Applications:   Automobiles industry Aerospace industry Electronic industry  Specifications:   Finish: Zinc, Nickel, Silver, Gold, Copper, Colored etc. Material: Steel, Stainless Steel, Carbon Steel etc.

We are one of the prominent Manufacturers, Suppliers and Exporters of Stainless Steel Springs. Our range of Stainless Steel Springs is attributed with exceptional fatigue resistance and fracture toughness which ensures no damage to its sturdy built. We offer Stainless Steel Springs at industrial leading price. We also provide customized packing as per our client’s requirements.

STAINLESS STEEL POOL COVER SPRINGS TENSION SPRINGS STAINLESS STEEL FOR WINTER POOL COVERS    Our range of Stainless Steel Springs for Winter safety pool covers is made from heavy duty 304 / 316 grade A2 /A4Stainless Steel wire. Extra D bracket ensures heavy duty tightening with Rubber straps and trims and finally into Brass Anchors into concrete deck. The normal 8" long Stainless Steel cover spring is available, and we also have the "short Stainless Steel spring". Short cover springs are used in situations where the cover comes close to the edge of the pool deck or a raised wall. Short springs are 4" in length. We also carry vinyl spring covers to protect your concrete deck (and your safety cover springs).

• Application: Automotive
• Color: Grey
• Feature: Corrosion Proof, Excellent Quality
• Material: Steel
• Brand Name: Symag Springs
• Packaging Size: Box
• Surface Finish: Polished

Stainless steel springs Ordered to load requirements when the following detail is requested: Rate lbf load per inc (kgf) load per mm. Right hand or left hand wound, if essential

• Packaging Type: Packet
• Color: Orange, Yellow
• Patti Material: Plastic
• Finishing: Coated , Non Coated

• Material: Stainless Steel
• Shape: Round
• Thickness: 0-5-10mm
• Color: Grey
• Application: Industrial Use
• Finishing: Polished
• Feature: Corrosion Proof, Durable, Easy To Fit

We are instrumental in offering premium grade SS Compression Springs to our valuable customers, across the nation. These springs are manufactured by us at par with industry standards by making use of quality raw material. Our professionals customize the products on the basis of size, dimension and other specifications so as to meet clients' requirements.

• Application: Industrial
• Type: tensile & Compresseion
• Application: Industrial
• Size: 0.5 to 6mm
• Brand Name: Local
• Dimension: MM

Ordered to load requirements when the following detail is requested: Free Length (FL) Load in lbf, N or Kgf at loaded length (LL) Rate lbf load per inc (kgf) load per mm. Maximum compression Maximum solid length Diameter, maximum outside (OD), minimum inside (ID) or mean diameter (MD) Right hand or left hand wound, if essential Type of ends (see right hand column) Material and finish Tolerances and special working conditions

Welcome to Conex Springs. A wide world of Stainless Steel springs, Copper Springs, Bronze Springs, Pool cover springs, Toggles etc. We are manufacturer and supplier of Compression Springs - Helical Springs and Coil Springs, Extension Springs - Tension Springs, Arm Springs, Clutch Springs, Hook Springs, Flat Strip Springs and shapes, Buffer Springs, Conical and Colute Springs, Torsion Springs, Spiral Springs, Stainless Steel Pool cover springs - Double Coil Drawbar Compression Springs and Drawbar Compression Springs. Our products are globally acknowledged for their high material strength, perfect finish, precise dimensions, etc.  CONEX products are known for their high quality standards and excellent workmanship. Over the decades we have made huge investments in inspection, testing and measuring instruments.We have a full-fledged Quality Assurance department with a team of highly skilled engineers checking the products during and post production. You will always get the winning blend of quality, competitive pricing, excellent communication skills and prompt customer service from Conex.        

• Feature: Easy installation, Durability, High strength
• Material: Stainless Steel
• Usage: Garage, Industrial
• Packaging Type: Box
• Grade: 302, 304 and 316
• Size: 2 & 4
• Form: Single Spring

• Material: Steel
• Thickness: 6mm
• Length: 100-200mm
• Application: Fittings
• Color: Silver
• Feature: Corrosion Proof, Perfect Shape