Steel Products Dealers in Nariman Point, Mumbai

Supply Condition: ASTM/JIS/EN and equivalent. In full hard, semi hard and soft quality Available Specification: EN/ASTM/JIS and equivalent. Zinc Coating: Base Material - Galvanized Coils, Galvalume Coils, Aluminum Coils Thickness: Galvanized & Galvalume based - 0.18mm to 1.6mm Aluminum based - 0.30mm to 1.20mm Width: 1250mm max. Coil Wt: Container: 8MT max Bulk : 12MT max Coatings: Top Coats - 5 micron primer + 20 micron colour Back Coat – 5 micron primer – 7 micron primer Colors:  All Colours available. Colour shades have to be matched.  

• Thickness: 0.14mm to 0.35mm
• Width: 500mm to 1200mm
• Length: As per customers specification
• Temper: T1 to T5, DR 7 to DR 9

Backed with industrious professionals, we keep a stern check on the products to ensure that the range is commensurate to international norms. Customers can place bulk as well as urgent orders with us and we can assure timely & safe delivery of the same.

Apart from Steel Imports and Trading we have also successfully commissioned an Induction Furnace. We have built this Factory in an Industrial belt called MURBAD located in Maharashtra State, India and were producing Mild Steel Ingots which we would sell to Re-Rollers for subsequent rolling. Our manufacturing capacity was approximately 60000 Mts per annum and we successfully operated at around 90% capacity utilization. This Factory was built using 100% Equity from Internal resources and our Company Director Mr. Narayan Saraf was Head of TREASURY for ALL INDIA INDUCTION FURNACES ASSOCIATION. Due to lack of feasibility in producing this product we have closed operations in this unit.

  - medium pressure smooth bore hose   medium pressure (3000 psi) hose is used in a wide spectrum of demanding compressed gas and industrial applications. It consists of an inner core of ptfe reinforced by an outer layer of stainless steel wire braid for strength and protection. Series sb hose is available in a non-conductive as well as a conductive core with a standard wall thickness of .030” or a heavy wall thickness of .040”.  - medium-high pressure smooth bore hose   medium-high pressure (4000 psi) hose is a popular choice for use as pigtails in the compressed gas industry. These hoses are also ideal for use in the steel industry where they are subjected to rapid rate impulses that are common on tapping jacks, mud guns and continuous caster hydraulic systems. Series mhp hose has a conductive core surrounded by two layers of stainless steel wire braid. Our larger diameter hoses have up to four layers of stainless steel wire spiral wrap for added strength.   - high pressure smooth bore hose   high pressure (5000 psi) hose is used in a variety of applications, such as hydraulics, compressed gases, r.i.m. (reaction injection molding machines), urethane transfer and hot melt glue. Series hp hose has a conductive core with a single layer of stainless steel wire braid in the smaller diameters. Larger diameters are double-braided.    convoluted pressure rated hoseour pressure rated convoluted hose is a popular choice for demanding applications in the chemical processing, pulp and paper, automotive and turbine engine industries. Series wcp is a helical, convoluted, non-conductive hose externally reinforced with ptfe impregnated fiberglass under a stainless steel wire braid reinforcement. Series bcp is similar but is made of conductive ptfe

• Thickness: 0.18mm to 0.70mm
• Width: 1250mm

Aluzinc steel Coils and Sheets ASTMJISEN and equivalent. In full hard, semi hard and soft quality (commercial grade, lock forming grade and structural grade).

Material : Stainless Steel Parts in SS 304 316 316L 202 Alloys Any special Stainless steel Parts Casting Material Composition as per customers requirement   Weights : From 10 Grams to 40 kg'sWe can offer Stainless Steel SS machined Parts castings casting cast parts   Stainless Steel Parts : We offer Stainless Steel Parts Stainless Steel machined parts turned Parts Cast Parts Stainless Steel Forged Parts Stainless Steel Parts facility up to 40 kg's in weight and Stainless Steel SS castings up to 1meter in length. Our sand casting facility is well equipped to tackle any challenging SS Casting job or Stainless Steel Parts castings enquiry.   Finish And Coating : Natural, Nickel Plated, Electro Polished Plated or any coating as per customer specification.    We shall be pleased to develop Non-Standard Stainless Steel castings SS Stainless Steel Casting

We are a prominent manufacturer and supplier of a wide gamut of Mild Steel Bright Bar. In addition to this, our manufacturing unit use contemporary techniques and the premium quality raw material under the supervision of skilled professionals, in order to fabricate premium quality products.

• Size: ½ Inch NB - 48 Inch NB
• Certification: IBR & NON IBR
• Grades: Carbon Steel WPB, WPL3 ,WPL6 , WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70
• Dimension: ANSI/ASME B16.9, B16.28, MSS-SP-43
• Specifications: ASTM/ASME A/ SA 234 / 860 / 420 , MSS-SP-75 WPHY
• Schedule: SCH 10 – SCH XXS
• Form: Seamless / ERW / Welded / Fabricated
• Additional Testing: NACE MR0175 , NACE TM0284 , HIC TEST , H2 SERVICE , ETC

ANSI/ASME B16.9, B16.28, MSS-SP-43 Carbon Steel Buttweld Fitting Manufacturer, Carbon Steel Gr WPHY 46 Buttweld Fitting Supplier, Carbon Steel Gr WPHY 42 Buttweld Fittings ExporterCarbon Steel ASTM A105 Buttweld Fittings, Carbon Steel Gr WPL6 Buttweld Fittings Exporter, Carbon Steel Buttweld Fittings in Mumbai, Carbon Steel Buttweld Fittings in India.Ellite Alloys is one of the largest exporter, manufacturer and supplier of Carbon Steel Pipe Fittings in India. These products are precisely designed and constructed by superior quality raw materials and sophisticated technology. Our offered Carbon Steel Products are designed and fabricated from high-grade steel and technologically advanced machinery. These products are durable in nature and require minimum maintenance.Our Carbon Steel Butt Weld Pipe Fittings are having some great features like Robust construction, Optimum performance, High- Grade materials, Sturdiness, Precisely design, Durability, etc. Further, these CS Butt Weld Pipe Fittings are checked on various parameters by our qualified quality inspectors before delivery. Our CS Pipe Fittings are accessible to our valuable customers in different and customized range of diameters, wall thicknesses and sizes at market leading prices. Stainless Steel 304/304L/304H Buttweld Fitting Manufacturer, Stainless Steel 410 Buttweld Fitting Supplier, Stainless Steel 316/316L/316Ti Buttweld Fittings Ellite Alloys Supplies Stainless Steel Flanges in Agartala, Agra, Agra Rampur, Ahmedabad, Aizawl, Ajmer, Aligarh, Allahabad, Alwar, Amaravati, Ambala, Ambattur, Ambernath, Amravati, Amritsar, Aurangabad, Bangalore, Bareilly, Belgaum, Bhagalpur, Bhavnagar, Bhilai, Bhiwandi, Bhopal, Bhubaneswar, Bidhannagar, Biharsharif, Bikaner, Bilaspur, Bokaro, Chandigarh, Chennai, Chittoor, Coimbatore, Cuttack, Dahod, Davanegere, Dehradun, Delhi, Dhanbad, Dharamsala, Dindigul, Diu, Durgapur, Erode, Faridabad, Fatehpur, Gandhidham, Gandhinagar, Ghaziabad, Greater Hyderabad, Greater Mumbai, Greater Warangal, Gurgaon, Guwahati, Gwalior, Haldia, Howrah, Hubballi-Dharwad, Hyderabad, Imphal, Indore, Jabalpur, Jaipur, Jalandhar, Jammu, Jamnagar, Jamshedpur, Jhansi, Jodhpur, Junagadh, Kakinada, Kalyan-Dombivali, Kanpur, Karnal, Kavaratti, Kochi, Kohima, Kolhapur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Mehsana, Mangalore, Mangaluru, Mira-Bhayandar, Moradabad, Morbi, Mumbai, Muzaffarpur, Mysore, Nagpur, Namchi, Nasik, Navi Mumbai, NDMC, Nellore, New Delhi, New Town Kolkata, Noida, Oulgaret, Pali, Panaji, Panipat, Panvel, Pasighat, Patiala, Patna, Pimpri-Chinchwad, Port Blair, Puducherry, Pune, Raipur, Rajkot, Ranchi, Raurkela, Industrial Township, Rourkela, Sagar, Salem, Satna, Secunderabad, Shaharanpur, Shillong, Siliguri, Silvassa, Solapur, Srinagar, Surat, Thane, Thanjavur, Thiruvananthapuram, Thoothukudi, Thrissur, Tiruchirapalli, Tirunelveli, Tirupur, Tumkur, Udaipur, Ujjain, Ulhasnagar, Vadodara, Vapi, Varanasi, Vasai-Virar, Vellore, Vishakhapatnam.Ellite Alloys exports Carbon Steel Buttweld Fittings to Countries like India, United States, United Arab Emirates, Canada, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Stainless Steelgeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Saudi Arabia, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Stainless Steelgeria, Mexico, Turkey, Hungary, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia.

• Type: Galvanized Steel
• Thickness: 0.15 to 1.0mm and above
• Grade: 120 GSM

We can supply galvanized and galvalume steel coils from thickness 0.12mm to 1.00 mm and above in width of 750mm and above from all major manufacturers

• Size: Sch 5 to Sch XXS
• Type: Stainless Steel Forged Pipe Fittings
• Material: Carbon Steel, Stainless Steel
• Certification: ISI Certified
• Application: Construction, Hydraulic, Industrial
• Color: Black, Grey, Silver
• Feature: Corrosion Proof, Fine Finishing, High Strength, Perfect Shape, Rust Proof
• Technics: Forged
• Condition: New
• Finishing: Non Poilshed, Polished
• Form: Bolts, Caps, Couplings, Elbow, Nut, Tee
• Connection: Butt Welded, Female, Threaded
• Brand Name: RSS
• Pressure: 3000#,6000#,9000#

We offer stainless steel coil. Grades tp-201,202,304,304l, 316,316l, 321,309,309s, 310,409,410,410s, 420,430,440 & 446 etc

Engaged in the trade of supplying the excellent product range, we are efficiently operating from Mumbai(India). We have well-maintained and capacious storage unit that includes all required facilities vital for a safe stacking of the products. We are working with experts and professionals and they supervise the range sternly ensuring zero damage to the stored items.

• Material: Forging And Engineering Alloy Steel
• Shape: Rectangular, Round, Square
• Application: Construction, High Way, Industry, Subway
• Color: Grey
• Grade: EN28
• Feature: Corrosion Proof

• Country of Origin: India
• Brand Name: JSP
• Material: Stainless Steel
• Certification: ISI Certified
• Technique: Cold Drawn
• Shape: Straight
• Grade Standard: ASTM / ASME SA 201, 202
• Width: 1000-5000mm
• Thickness: 0.5-1mm
• Usage: Automobile Industry, Construction, Kitchen, Elevator, Roof Sheet
• Specialities: WaterProof, Termite Proof, Fine Finishing
• Packaging Type: Roll
• Coil Weight: 10-20MT

We Import, Stock & Supply Stainless steel Coils in various Grades like 304, 304L, 321, 303, 347, 309, 310, 410, 420, 440C, 329, 303, 430, 316, 316L, 446, 416, 201, 202, 440A, 440B, > 1% Ni, 4% Ni, Utensil Grade, etc. in various finishings like 2B, 2D, Aluminium, Matt, Hairline, Engrave designed, Sheets in various sizes ranging from 0.3mm thickness to 3.00mm.  We also have Stainless steel Foil available in half hard, soft & Full hard (Spring Action) hardness in sizes ranging from as fine as 0.05mm to 1.00mm thickness.  SS Foil & Coil are also available in slitted width as per customer requirement.

• Type: Mild Steel Products
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm, 3.5-4mm, 4.5-5mm, 5.5-6mm, 6.5-7mm, 7.5-8mm, 8.5-9mm, 9.5-10mm
• Application: Construction, Constructional, Manufacturing Unit, Marine Applications, Oil Gas Industry, Pharmaceutical Industry, Water Treatment Plant
• Grade: AISI, ASTM, DIN
• Color: Black, Grey, Silver
• Feature: Corrosion Proof, Excellent Quality, Fine Finishing, High Strength, Perfect Shape
• Finishing: Non Poilshed, Polished

To ensure utmost satisfaction of the buyers, we make sure that the delivery schedule should be properly maintained. To ensure quality of the products, we conduct diverse quality tests at all stages and thus our products are quality assured.

• Material: Stainless Steel
• Color: Black, Brown, Grey, Silver
• Certification: ISO 9001:2008
• Width: 1-50mm, 100-150mm, 150-200mm, 200-250mm, 50-100mm
• Dimension: 1-500mm, 1000-1500mm, 1500-2000mm, 2000-2500mm, 500-1000mm
• Thickness: 1-100mm, 100-200mm, 200-300mm, 300-400mm, 400-500mm

Buy Ring circles From Shree viratra enterprises ab best and affordable rates

We are one of the preeminent Exporters and Suppliers of Duplex Steel Buttweld Fitting, based in Maharashtra, Mumbai. We are widely appreciated for providing the optimum quality Butt-weld Fitting. We procure Duplex Steel Butt-weld Fitting from reliable manufacturers who use high-end technology and the finest quality steel components at the time of production process. We can process bulk orders. We can also consider urgent requirement within less possible time. Duplex Steel Standards : ASTM / ASME SA 815 UNS NO.S 31803, S 32205, S 32550, S 32750, S 32760.

Stainless Steel ASTM / ASME SA 182 F 304 , 304L , 304H, 309H, 310H , 316 , 316H , 316L , 316 LN , 317 , 317L , 321 , 321H , 347 , 347 H   Duplex Steel ASTM / ASME SA 182 F 44 , F 45 , F51 , F 53 , F 55 , F 60 , F 61.

• Type: Stainless Steel Coils
• Standard: AISI, ASTM, EN

we are an international supplier of stainless steel coils in customized dimensions and grades. Our range of stainless steel coils are manufactured from top quality raw materials and advance machinery in line with international standards. We are a stainless steel coils manufacturer known for its durability and accurate dimensions and are widely used in both domestic and international markets. All steel plate and coil is hot-rolled as a first rolling step, after which it is annealed in order to attain homogeneous material characteristics. Annealing produces an oxide coating on the steel, which is removed by shot blasting and by pickling in an acid bath. having operated in the stainless steel industry for over 15 years, we can customize the coils to suit your requirements. We are producing high quality stainless steel 304 coils, stainless steel 316l coils, and stainless steel 201 coils at the most competitive prices in the industry. an iso 9001:2008 certified company, the steel plate factory (steel plates, sheets and coil division) is a leading stockholder, supplier and exporter of cold rolled stainless steel coils and hot rolled stainless steel coils. Stainless steel coils are cut to your specifications and supplied with complete set of mill test reports. Custom length and width up to 2000 mm can be made available. Exports is our specialty! and we can source many hard to find grades and or non-standards sizes to meet the special requirements of our customers. All stainless steel cold rolled stainless steel coils and stainless steel hot rolled coils can be cut to size with the help of our extensive expertise in processing steel coils products. ss 304, ss 304l, ss 316 and ss 316l coils are the most popular and economical grades of stainless steels. Stainless steel 304/304l coils and stainless steel 316/316l coils, along with duplex stainless steel coils offer good corrosion resistance to many chemical environments as well as marine and industrial exposures.

• Material: Stainless Steel
• Surface Finishing: Polished
• Shape: Round

• Color: Silver
• Country of Origin: Made in India
• Usage/Application: Automobile Industry
• Product Code: Steel Coils