Submersible Pumps Dealers in Kurla, Mumbai

Motor• Suitable in Wide Voltage• Winding Wire - High Quality Insulation• Shaft - Stainless Steel• Thrust Bearing - High Quality Carbon Vs Steel Combination• All Fasteners - Stainless Steel• Motor - Water filled/Oil filled• Higher Efficiency - Higher Water Discharge at Low Power Consumption• Copper RotorPump• All Pump Parts - Stainless Steel• 40% Higher Efficiency  • Wear & Abrasion Resistence• Lower Suction Housing - Precision Cast Stainless Steel• Hexagonal Pump Shaft - Higher Strength Against Radial Load• In-built Strainer - Prevent Sand & Particles Entry• Negligible Maintenance Cost• Excellent Aesthetics  Applications • Irrigation and Drip Irrigation• Sprinkler, Gardening and Bungalows• High Storey Buildings• Industrial Water Supply Schemes

Red Jacket Submersible Turbine Pumps (STPs) are the most widely installed submersible fuel pump in the world. That�s because Red.

We are one of the leading Manufacturers, Exporters, and Suppliers of PVDF Sump Pump. Our PVDF Sump Pumps possess heavy-duty design with thick walled volute casing and back plate. There is no requirement of shaft sealing in our PVDF Sump Pumps. The specialized bush bearing at the bottom end of the shaft minimizes the shaft deflection. All the hardware is of Polypropylene with metal insert. The available submerged Length of PVDF Sump Pump is 0.5 mts, l.0 mts, 1 .5 mts, 2.0 mts & 2.5 mts. Heavy Duty Engineered Polyproylene/PVDF Sump-Pump for primary Effluents/Corrosive Liquid and Scrubbing System : Heavy duty designThick walled volute casing & Back plateSemi-open Impeller with large metal insertShaft sealing not requiredSpecislized CFT bush bearing at bottom end of shaft to minimize to shaft deflectionAll hard ware are of polypropylene with metal insertAvailable submerged Length : 0.5 mts, 1.0 mts, 1.5 mts, 2.0 mts & 2.5 mtsMaximum head-30 mts, Maximum flow-30m3/hr *Technical Details Available on request Warantee Clause : We stand guarantee only the genuinety of PVDF Resign in our pumps but not stand gaurantee for any king of chemical, physical & toxicological effects on the same by the liquid handled with our pumps. Since the conditions of handling and useare beyond our control, we make no guarantee of results. We assume no liability for injuries, damages or penalties resulting from its use whether or not our recommendations are followed. Our recomendations are only on the basis of our past experienceand should be taken as guarantee. Part List for VSP Pumps No.DescriptionM.O.C.Qty.1Voute CasingPolypropylene1 No.2Back PlatePolypropylene1 No.3ImpellerPolypropylene1 No.4Cage RingPolypropylene2 Nos.5Back Plate BushCarbon Filled Teflon1 No.6Shaft SleeveHast-B/Ceramic1 No.7Shaft with HDPE SleeveEn8 / HDPE1 No.8Column PipeHDPE1 No.9Discharge PipeHDPE1 No.10Discharge FlangePolypropylene2 Nos.11Discharge ElbowPolypropylene1 No.12Elbow FlangePolypropylene1 No.13Pump Support PlateM.S. with PP Lining1 No.14Motor Support Stool - BottomC.I.1 No.15Motor Support Stool - TopC.I.1 No.16Bearing Cover - BottomC.I.1 No.17Bearing Cover - TopC.I.1 No.18Ball BearingSKF - 62071 No.19Ball BearingSKF - 73061 No.20Oil Seal (35x60x10)Neoprene3 Nos.21Oil Seal (25x40x10)Neoprene1 No.22Flexible CouplingC.I.1 Set23Lock NutSteel2 Nos.24Motor25Eye BoltsSteel2 Nos.26Back Plate FlangePolyproplylene1 No.27StrainerPolyproplylene1 No.28Hardwares for Clamping Cage RingSteel / PP8 Nos.29Hardwares for Clamping Casting & Elbow FlangeSteel / PP4 Nos.30Hardwares for Clamping Column Pipe & Back PlateSteel / PP6 Nos.31Hardwares for Clamping Column Pipe & Pump Support PlateSteel / PP6 Nos.32Hardwares for Clamping Discharge Pipe FlangeSteel / PP4 Nos.33Hardwares for Clamping Bearing CoverSteel8 Nos.34Hardwares for Clamping Motor & Motor StoolSteel12 Nos. Note : The pumps are available in five standard vertical length, 500mm, 1000mm, 1500mm, 2000mm, 2500mmAt he time of ordering spare parts please specify submerge depth size of the pump.The pump is designed up to 1.5 mts. submerge depth single column pipe and from 2 mts. to 2.5 mts. submerge depth the pump is designed with double coulmn pipe.The submersible depth is measured from the pump support plate.

• Application: Domestic, Industrial, Agriculture, Sewage
• Power Rating: 2.2 kW to 7.5 kW
• Maximum Head: 15 to 50
• Capacity: Up to 31 liters per second

The Submersible Pumps, offered by us, have the maximum capacity up to 31 litres per second. These pumps are available in different power ratings ranging from 2.2 kW to 7.5 kW. Our submersible pumps have maximum head ranging from 15 to 50.            

Our company name figures among trustworthy Suppliers of Submersible Pumps based in Maharashtra, India. The best quality material and ultra-modern techniques are used their production. Offered by us in different sizes and grades, our Submersible Pumps stand out of the rest due to their high-strength, non-corrosive nature, sturdy-built and longevity. One can get them at modest prices, from us.   Our Product Range : 100 mm well size (4”) 150 mm well size (6”) 200 mm well size (8”) 250 mm well size (10”) 300 mm well size (12”) High Pump Efficiency : The innovative mechanical design and advanced manufacturing technology is such as to enhance the pumping efficiency, variable-speed and durability, leads to less energy consumption.Applications : Pumps are designed for the applications like - Irrigation systems, Nurseries and Gardening Booster systems Domestic water supply Groundwater lowering Industrial application

• Power Source: Electric
• Material: SS
• Motor Horse Power: 1- 3 HP
• Usage: Domestic, Agriculture, Sewage
• Voltage (Volt): 110- 260 V
• Power Range: 1.1 to 37.0 kW

• Usage/Application: Domestic, Agriculture, Sewage
• Power Source: Electric
• Material: SS
• Voltage (Volt): 110-260V
• Motor Horsepower: 1 - 3 HP
• Power Range: 1.1 to 37.0 kW

Dewatering Pumps are self priming, single stage, Centrifugal Pumps driven by A.C. squirrel cage induction motors in a fully submersible construction. They are easily transportable and have a wide variety of applications. These are powerful submersible contractor pumps designed for draining abrasive water from construction sites, mines, docks, flooded areas, etc. These easy-to-install pumps are often used in tunneling and mining where the reliability of the equipment is a crucial parameter. The pumps have an excellent performance capacity with high motor power combined with compact light weight design.

We are a leading manufacturer and supplier of Submersible Pump in Mumbai

electric submersible pumps, Submersible pumps, Electric Motors, Pumps

Dewatering Submersible Pumps    Submersible Sewage Pumps   Borewell Submersible Pumps Stainless steel Borewell Submersibles Open well Submersible Monoblock Pumps

• Material: Metal
• Temperature Range: Up to 120 Degree C
• Outer Dia: NB 25 to 300 mm
• Specific Gravity: 0.75 to 1.5 g/cm3
• Capacity: 500 M3/hr
• Surface Finishing: Color Coated
• Features: Long service life, Rugged, High performance

Dewatering Pumps 1HP To 100HP In MOC Up To 7.5HP Alumn & Above CI Standard For Handling Muddy Water, Storm Water & Tunnels.

We are leading manufacturer, supplier and exporter of huge range of Submersible Pump.

Dewatering Pump, Vertical Pumps, horizontal pumps, non api pumps

submersible wastewater pump, pumps sets, Submersible Dewatering Pump

Submersible Pump, Pressure Pump, Single Phase Motor, Stainless Steel

Submersible pumps, Centrifugal Pumps, vertical turbine pumps

sump pump, Air Operated Double Diaphragm Pump, Centrifugal Pump

Dewatering Pumps, Submersible pumps, Submersible Motors, Electric Motors