Suction Pump Dealers in Mumbai

We efficiently carry out systematic process at every stage, to make certain that the product basket is developed as per the specified requirements. Our facility in Hyderabad(India) is well connected by a variety of modes of transportation. Thus, we are able to reach customer anywhere.

• Voltage: 230 volts, ± 5%
• Weight: 2.5 Kgs.
• Warranty: 1 Year Motor & Pump
• Body: High Impact ABS Plastic, easy to clean
• Vacuum Pump: Oil Free Diaphragm Type
• Motor: Class F Insulation, with Thermal Cut out
• Vacuum: Approx. 560 mm Hg (1000 DX) & 50 mm Hg to 300 mm Hg for 1000 DX Low Suction
• Free Flow: Approx. 10 LPM
• Current: Approx. 0.55 amp.
• Power Consumption: Approx. 44 watts. (less than a tube light)
• Remote Operation: Extra Socket provided
• Dimensions with Jars: L: 330 mm x W: 160 mm x H: 195 mm

• Material: Cast Iron
• Brand Name: Kirloskar
• Max Flow Rate: 0.5 cusecs to 200 cusecs
• Frequency: 50Hz
• Head: 30m to 200m
• Capacity: 100-2000 cubic metre
• Temperature Range: 30-60 Celsius
• Liquid Temp.: 30-60 Celsius
• Usage/Application: Industrial/Fire fighting

• Type: Suction Centrifugal Pump
• Weight: 100-150kg, 150-200kg, 200-250kg, 250-300kg, 50-100kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric
• Warranty: 1year, 2years
• Application: Industry
• Automatic Grade: Manual, Semi Automatic

Centrifugal pumps are a popular choice for low viscosity (thin) liquids that need to be pumped at high flow rates. Centrifugal pumps are often used in many industrial, municipal and commercial applications and are usually quick to install and easy to repair.

• Specialities: Fixed & Variable Output Choice, Leak Proof in Nature, Compact, Sturdy Design & Long Lasting, Low Power Consumption, High Efficiency , Noiseless Running, Virtually Maintenance Free .
• Maximum Discharge Flow: 6000 Lph
• Motor Horse Power: 2 HP
• Motor Phase: Single Phase
• Material of Construction: Cast Iron

Reciprocating pumps often suffer from pulsation problems on both the suction and discharge side. Many of the problems can be traced to poor suction conditions where the pressure at the inlet to the pump is less than that required by the pump manufacturer. The suction pressure available at the inlet to the pump is often referred to as either NPSHa (Nett Positive Suction Head available) or NPIP (Nett Positive Inlet Pressure). The Flo-Dyne Suction Stabiliser is a gas, or vapour, charged pulsation dampener which if installed at the pump suction will eliminate all NPSH problems and ensure a smooth running pump. For maximum effect the suction stabiliser may be combined with the Flo-Dyne liquid filled discharge pulsation dampener. It is ideal for use on pumping systems where pumping conditions change, or where the pumped liquid is not compatible with rubber membranes or cellular foams. The Flo-Dyne suction stabiliser works by using a gas cushion over the pumped liquid so that we can then reduce acceleration head and pulsation by exploiting three basic properties, which each contributes to the overall elimination of pulsation and NPSH problems: Dampening Effect: Every suction stabiliser has a gas charge which, as it is obviously more compressible than the liquid being pumped, will provide a capacitance or spring effect which in turn will absorb the pulsation created by the abrupt flow change as the pump suction valves open and close. Separation Effect: Flow through the suction stabiliser is slowed and rotated before leaving through the exit nozzle. By controlling the transit time and flow velocities through the equipment, entrained gases are encouraged to break out of solution and collect at the top of the stabiliser instead of passing directly into the pump inlet nozzle which reduces the quantity of entrained gas entering the pump, thereby reducing or eliminating the conditions for cavitation to happen. Volume Effect: The suction stabiliser acts as a mini-storage tank, the stabiliser provides a full charge of liquid when the pump valves open and allows for smooth acceleration and deceleration of the liquid in the line. By providing the tank volume close to the pump, acceleration head is eliminated and the possibility of cavitation occurring in the pump cylinders is eliminated. The suction stabiliser will provide complete compliance with the requirements of API674 for pulsation levels. All units are constructed to meet your local and national regulatory requirements and will be made either as piping, or pressure vessels, to fit into your piping. Units are typically built to ASME VIII vessel code, or ASME B31 piping code, however, supply to other national codes such as IBR, CODAP, and Stoomwezen is always possible. Each unit may be supplied with connecting flanges, or with bevelled connections, and ready for welding directly into your pipework system. A sight gauge, suitable level instrumentation, or an automated control system can be provided to monitor or control the gas / liquid level.

• Applications: Juices,Concentrates,Pharmaceuticals,Beer etc.
• Immersion Length: 39
• Max. Discharge Pressure: 40 psi (2,8 bar)
• Max. Viscosity: 1,000 cps (mPAS)

Standardâ��s SP-8900 Series Sanitary Centrifugal Pumps offer the ideal solution for transferring Dairy Products, Pharmaceuticals, Juices, Concentrates, Beer, Wine, and Cosmetic Fragrances from barrels, kettles and Tote Tanks�®. The SP-8900 Series pumps are 3A certified and incorporate a hygienic design that enables operators quickly to disassemble and sanitize. Designed for applications where maximum discharge pressure rate is required.

• Voltage: AC 220 ± 10%, 50Hz ± 2%
• Power: 90 VA
• Max Negative Pressure: >0.075 Mpa
• Noise: <65 DB (A)
• Pumping Rate: > 25 L/min
• Jar Capacity: 1000 Ml

3A / EHEDG sanitary certified pumps from Italy Mfd. in AISI316 / AISI316L / Duplex St. Steel, etc. Jacketed / Flushed sealings available Integral pr. relief valves / Enlarged suction inlet available Monoblock / Coupled versions available Applns. : Dairy, Food, Cosmetics, Pharma, Confectionery, Beverages, etc.

• Material: Stainless steel 316L
• Elctro polished: Less then 0.30 Ra
• External parts material:: Stainless steel 304

We are one of the leading manufacturers of optimum quality Steel Sanitary Pump. This product is developed and designed to meet the requirements of various industries for providing pure water. This product is manufactured using finest quality stainless steel that is sourced from well known vendors. This pump consists of standard motor, stub shaft, coupling, adaptor, back plate, and impeller seal with pump casing with casing drain valve.

IEWI offer sanitary stainless steel centrifugal pumps for pharma, drugs, food, beverage, dairy, cosmetics and chemical industries. Pumps are monobloc design and manufactured from SS 304 /SS 316 bar stock/sheet metal. All product contact parts(casing, impeller) are in stainless steel, duly electropolished and free from uncleanable pockets.Pumps are fitted with mechanical seals externally mounted. Pumps can be dismantled and assembled in minutes without tools. Pumps can be cleaned and steam sterilised. Drain ports or sampling valves are provided on request. End connections offered include triclamp, DIN, SMS, flanged and butt-weld Pumps are offered in capacities 3000 litres/hour to 6000 litres/hour

Applications Firefighting Coal mines Water Treatment Plants Water Circulation-Air Conditioning Plants and Power Stations Industrial and Municipal Water Supply Water Circulation Systems Sugar Factories Paper Plants

We are offering sanitary centrifugal pump. centrifugal pumps “pbs-yuanan”s premium range of centrifugal pumps offers high efficiency, low energy consumption, several options & a wide range of flow rates & pressures. “ykh” ultrapure series designed to meet the high purity & hygienic requirement of pharmaceutical industry. Pumps are supplied with all the validation documentation. “yah” series designed for dairy & beverages. “yzb” series of self priming pumps for cip systems. “yas” rotary lobe pumps designed for low, medium & high viscosity media.

Highest efficiency for flows above 2500 l/s (40,000 gpm) The Flygt split case pump WS, HSC pump is available for flows of up to 14,000l/s (222,000 gpm) and can be installed horizontally or vertically. The standard versions of this pump are made of cast iron with rotation elements in either bronze or stainless steel. Different materials are available on request, which makes this pump the best choice for very large municipal or industrial water supply applications. Every pumps is customized to the specific requirements of each application. The heavy-duty casing withstands extreme pressure and its rugged design resists external forces and vibrations. Both suction and discharge connections are in the lower half casing. The ability to remove the upper half casing permits easy inspection, maintenance, and removal of the complete rotating element without disturbing the piping or driver. Double suction impeller minimizes axial thrust and guarantees highly efficient, smooth, and vibration-free operation. Renewable wearing rings permit easy maintenance of proper running clearances.  

• Application: Chemical industry, Food beverage industry, Cosmetic industry etc.
• Material: Mild Steel
• Driven Type: Electric
• Features: Corrosion resistance, Sturdy construction, Affordable prices .
• Frequency: 50 Hz
• Power(W): 40kW
• Surface Treatment: Color Coated

Water Pumps With Split Casing are with split casing. Our range is available in different technical specifications, power output and dimensional attributes. These water pumps are widely used in water spray, water supply, irrigation, etc. Due to superior designing and fabrications, these water pumps consume less power, require minimum maintenance and offer long lasting performance.

• Type: Split Case Pump
• Weight: 100-150kg, 150-200kg, 200-250kg, 250-300kg, 50-100kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Application: Industry
• Automatic Grade: Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric
• Pressure: High Pressure, Low Pressure, Middle Pressure
• Structure: Horizontal
• Warranty: 1year, 2years

  Uniboost “UC” Series is a horizontal single stage, Back pull out design as per ISO 2858.Standard design is foot mounted, In this design for the facility of maintenance to easily removed without disturbing the motor form the base frame & the pump casing fixed to the pipe line. Specification : Volute Casing:One piece self venting, high efficiency, volute casing suction and discharge ends as well as the supporting feet are integrally cast in the volute casing Impeller:Closed radially impeller specially designed for low NPSH requirement. Hydraulically balanced by back vanes and for large impeller diameters by balancing holes. Shaft & Bearing:The Shaft is guided in oil lubricated bearings. The alignment of bearing is ensured by appropriate centerings and modern manufacturing methods. Shaft is of high tensile steel and accurately grounded all over. Shaft Sealing:Supplied with either asbestos or graphite packing or M seal depends on liquid. Flanges:As per ASA/BS or DIN 2533 available.

  our range of highly-polished, stainless steel (304 or 316l) pumps have been specifically developed for applications that demand the highest standards of hygiene and contamination control in a clean and sterile environment centrifugal pumps apply centrifugal force to generate velocity, use rotating impellers to increase velocity, and push fluids through an outlet valve. Positive displacement pumps use rollers, gears, or impellers to move fluid into a fixed cavity so that when liquid exists, the vacuum that is created draws in more fluid. Jet pumps force fluid through a nozzle, converting the fluid’s energy into velocity energy. Airlift pumps mix air or gas with the liquid media so that the air-liquid mixture, with a lower specific weight than the liquid, rises in the pipe and is discharged above the level of the liquid. application of sanitary centrifugal pumps milk | butter milk | sugar syrup | softdrinks | pharma syrup | mineral water | fruit juice 

We are offering Horizontal Split Case Pumps

• Pressure: High Pressure
• Application: industrial
• Power: Electric
• Brand Name: LEAKLESS
• Packaging Details: Fumigated Export Worthy Wooden Box With Bolting Systems
• Place of Origin: Maharashtra, India
• Model Number: LSP
• Standard or Nonstandard: Standard
• Supply Ability: 20 Set/Sets per Day Negative Suction Pumps
• Product name: Negative Suction Pumps

MH : Pump stage as well as al moving parts in contact with the pumped liquid are made of stainless Steel AISI 304 .Discharge casing and suction are Grey Iron. MHI: Discharge casing, suction casing as well as all parts in contact with the pumped liquied are made        of srainless steel AISI304. MHN: Discharged casing, suction casing as well as all parts in contact with the pumped liquid are made   of stainless steel AISI316. Applications Liquied transfer and circulation of liquids within light industry and farming Pressure boosting in single-pump and multi-pump booster systems Domestic water supply Cooling systems Air-conditioning systems Washing and cleaning systems Wter treatment. Features and benefits Compact design Reliable and robust construction Energy-optimised pumps Easy and simple installation User- Friendly operation Low noise level Reliable water supply.

We are offering top suction regenerative pump is exported and supplied by us to fulfill the requirements of the clients. High performance, superb visibility and easy operation are synonym to our range of top suction regenerative pumps that are widely preferred by the buyers. Customers can be eased with the market leading rates of the top suction regenerative pumps range. .

• Type: Back Pull Out Pumps
• Application: Industrial
• Weight: 100-200kg, 200-300kg, 300-400kg, 400-500kg
• Color: Black, Blue, Grey, Light Green, Light White
• Voltage: 110V, 220V, 380V
• Condition: New, Used
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic
• Warranty: 1year, 2years

Series In Stainless Steel These Pumps are used in dairy industries and for DM Plant in Pharma Industries.

These Pumps have a Horizontal back pull out design as per ISO 2858 / ISO 5199, suitable for 16 bar pressure, with a Capacity up to 400 m3/hr at 1450 RPM. Sizes from DN 32 to 150 mm Flanges as per ASME (formerly ANSI) B16.1 High efficiency due to superior design Replaceable wear rings - Eliminates casing wear, permit easy maintenance of proper running clearances for maximum efficiency. Features :  Efficient operation  Low NPSHR.  Vibration free performance.  Optimum pump solution.  Lower power consumption.  Minimum maintenance cost.  Minimum downtime.  Various configurations.  Interchangeable parts.

• size: 150 mm
• Capacity: 470 m3 /hr

These pumps are horizontally mounted having axially split casing. They can either be single stage or double stage. These are designed with single suction with a single volute operating at 50 Hz or 60 Hz. These pumps are used in urban water supply, industries, irrigation, air conditioning and so on. Water supply Air-conditioning Power plants Mine drainage Irrigation Fire fighting.

niboost “UC” Series is a horizontal single stage, Back pull out design as per ISO 2858.Standard design is foot mounted, In this design for the facility of maintenance to easily removed without disturbing the motor form the base frame & the pump casing fixed to the pipe line.   Specification : Volute Casing:One piece self venting, high efficiency, volute casing suction and discharge ends as well as the supporting feet are integrally cast in the volute casing Impeller:Closed radially impeller specially designed for low NPSH requirement. Hydraulically balanced by back vanes and for large impeller diameters by balancing holes. Shaft & Bearing:The Shaft is guided in oil lubricated bearings. The alignment of bearing is ensured by appropriate centerings and modern manufacturing methods. Shaft is of high tensile steel and accurately grounded all over. Shaft Sealing:Supplied with either asbestos or graphite packing or M seal depends on liquid. Flanges:As per ASA/BS or DIN 2533 available.