Superfit Continental Pvt. Ltd Kalbadevi, Mumbai, Maharashtra

Material : Steel

Capacity : Upto 2000 ml

Cap Type : Round

Material : Plastic

Made of SS lid, funnel, base and clamp having filter support screen, silicon gasket and Teflon sealing ring in the lid. Used in microbiological quality control as well as for analytical determination e.g. of metal particiles in lubricating oil, iron oxides in boiler water.Filter Diameter: 47mm.Filtration Area: 12.5cmFunnel Capacity: 250ml

U.V. Chromatography inspection cabinet for viewing and detecting separated substances on T.L.C. layers fitted with short wave (254nm) U.V. Source for use on 230 V.A.C.U.V. Cabinet with both long wave (365nm) and short wave (254 nm) tubes but without filter and a separate lamp for visible radiations

ModelDescription R/340 Tin Layer Chromatography Kit Model PC-9. This unit is base on German pattern Developed by thickness adjustment arrangement between 0 to movable 2mm.Model PC-9 has the following components:- a) Spreader (Applicator) made of electroplated brass.b) Perspex base size 114 x 23 cm. to support 5 glass plates of size 20 x 20 or 10 of 20 x 10 cm. and two plates of 20 x 5 cm. c) Drying plate rack anodized alluminium for ten 20 x 20cm. plates.d) Spotting Template Perspex.e) Developing tank with lid.f) Five Glass plates 20 x 20cm. and two end plates 20 x 5 cm. or Ten 20 x 10 cm. and two 20 x 5 cm. plates.g) Micro pipette corning glass.h) Scriber.i) Glass Sprayer with rubber bellow.j) Instruction Manual   Optional Accessories for T.L.C. Model PC-9 R/340/02 Draining rack for holding washed plates in angular position so that water can drop off over corner of wet plates before coating. R/340/03 Plate rack made of stainless steel to hold vertically two plates of 20 x 20 cm. in developing tank R/340/AL Drying plate rack made of anodized alluminium for plates of 20 x 20 cm. R/340/04 T.L.C. Plate storage Teakwood Cabinet for transport and storage of coated plates, sealed against air humidity. Size: 38 x 23 x 20 cm. R/340/05 Dessicator Cabinet, this is used for storing plates in thin Layer Chromatography and for general laboratory work. Mae of hick alluminium sheet with stout glass door with rubber gasket. A tray for silica gel desiccant and two perforated shelves are provided.Inner DimensionHeight x Width x DepthSize 30 x 50 x 35cm.   Replacement and Additional parts for T.L.C Model PC-9 R/340/01 Spare T.L.C. Applicator Electroplated Brass. Inbuilt thickness adjustment from 0-2 mm. (Minimum div 0.25mm) R/340/08 Spare Perspex base (white Acrylic) size 114 x 23cm. to support glass plates R/340/07 Spotting Template Perspex R/340/11 Glass plate all sides ground 20 x 20cm R/340/13 Glass plate all sides ground 20 x 10cm R/340/15 Glass plate all sides ground 20 x 5cm R/340/17 Chromatography tank with cover for 20 x 20 cm. plates R/340/19 Chromatography tank with cover for 20 x 10 cm. plates R/340/21 Chromatography tank with cover for 20 x 5 cm. plates R/340/23 Glass sprayer with rubber below. R/340/25 T.L.C. Micro pipette   Pipettes, Micro (Lambda) for T.L.C. single mark

Material : Borosilicate Glass

Color : Grey

Rotary Vacuum Evaporator, Rotavap Series Diagonal Condenser, Model PBU-6 This model of evaporator is supplied complete with geared drive unit offering smooth speed control by analog knob, Jack arrangement fitted on base unit for positioning glass assembly, Double walled water bath thermostatically controlled temp., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800 ml., receiver flask capacity one liter fitted with a ball joint, feeding tube and vapour path tube a complete working unit. The same unit can be supplied with round bottom one liter capacity evaporating flask instead of 800ml. per shape.     ModelDescription R/150/01 Condenser double coiled with S-35 cup. R/150/03 Gasket Seal for Vapour path Tube (VITON) R/150/05 Vapour Path Tube B-24, B-29 R/150/06 Feed Tube for condenser R/150/07 Evaporating flask R.B. 1 liter B-24 socket R/150/08 Receiving flask with S-35 cup (socket) joint capacity 1000 ml. R/150/09 Evaporating Flask Kjeldhal cap. 800 ml. B-24 R/150/22 Evaporating Flask Kjeldhal cap. 500 ml. B-24 R/150/24 Evaporating Flask Kjeldhal cap. 300 ml. B-24 R/150/26 Evaporating Flask Kjeldhal cap. 100 ml. B-24 R/150/11 Tension Spring to hold condenser. R/150/13 Wire Clip to holder vapour tube and boiling flask R/150/15 Ball joint clip S-35 R/150/32 Water bath double walled inner SS with Thermostatic temperature control. R/160 Rotary Vacuum Evaporator, Rotavap Series Diagonal Condenser, Model PBU-6D. This model of evaporator is supplied complete with geared drive unit offering smooth speed control by analog knob, Jack arrangement fitted on base unit for positioning glass assembly, Double walled water bath having Digital temperature indicator cum controller., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800 ml., receiver flask capacity one liter fitted with a ball joint, feeding tube and vapour path tube a complete working unit. The same unit can be supplied with round bottom one liter capacity evaporating flask instead of 800ml. per shape. R/160/01 Condenser double coiled with S-35 cup. R/160/03 Gasket Seal for Vapour Tube (VITON) R/160/05 Vapour Path Tube B-24, B-29 R/160/6 Feed Tube for condenser R/160/07 Evaporating flask R.B. 1 liter B-24 socket R/160/08 Receiving flask with S-35 cup (socket) joint capacity 1000 ml. R/160/09 Evaporating Flask Kjeldhal cap. 800 ml. B-24 R/160/22 Evaporating Flask Kjeldhal cap. 500 ml. B-24 R/160/24 Evaporating Flask Kjeldhal cap. 300 ml. B-24 R/160/26 Evaporating Flask Kjeldhal cap. 100 ml. B-24 R/160/11 Tension Spring to hold condenser. R/160/13 Wire Clip to holder vapour tube and boiling flask R/160/15 Ball joint clip S-35 R/170 Rotary Vacuum evaporator, Rotavap Series Vertical Condenser, Model PBV-7. This model of evaporator is supplied complete with geared drive unit offering smooth speed control by analog knob, Jack arrangement fitted on base unit for positioning glass assembly, Double walled water bath thermostatically controlled temp., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800 ml., receiver flask capacity one liter fitted with a ball joint, feeding tube and vapour path tube a complete working unit. The same unit can be supplied with round bottom one liter capacity evaporating flask instead of 800ml. per shape. R/170/02 Vertical condenser double coil with two outlets for water circulation. With S-35 Ball at bottom for connecting to receiving flask. Quick fit type joint at top of condenser. Cock for feed tube on one side while the other side will be connected to motor with ring. R/170/03 Cone Adapter for condenser to Vacuum pump R/170/06 Vapour Path Tube B-24, B-29 R/170/07 Gasket Seal for Vapour Tube (VITON) R/170/11 Feed Tube for condenser trap R/170/13 Receiving flask with S-35 cup (socket) joint capacity 1000 ml. R/170/15 Evaporating Flask Kjeldhal cap. 800 ml. B-24 R/170/17 Evaporating Flask Kjeldhal cap. 500 ml. B-24 R/170/19 Evaporating Flask Kjeldhal cap. 300 ml. B-24 R/170/21 Evaporating Flask Kjeldhal cap. 100 ml. B-24 R/170/23 Tension Spring to hold condenser. R/170/25 Wire Clip to holder vapour tube and boiling flask R/170/27 Ball joint clip S-35 R/17032 Water bath double walled inner SS with Thermostatic temperature control. R/171 Rotary Vacuum evaporator, Rotavap Series Vertical Condenser, Model PBV-7D. This model of evaporator is supplied complete with geared drive unit offering smooth speed control by analog knob, Jack arrangement fitted on base unit for positioning glass assembly, Double walled water bath having Digital temperature indicator cum controller., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800 ml., receiver flask capacity one liter fitted with a ball joint, feeding tube and vapour path tube a complete working unit. The same unit can be supplied with round bottom one liter capacity evaporating flask instead of 800ml. per shape. R/171/02 Vertical condenser double coil with two outlets for water circulation. With S-35 Ball at bottom for connecting to receiving flask. Quick fit type joint at top of condenser. Cock for feed tube on one side while the other side will be connected to motor with ring. R/171/03 Cone Adapter for condenser to Vacuum pump R/171/06 Vapour Path Tube B-24, B-29 R/171/07 Gasket Seal for Vapour Tube (VITON) R/171/11 Feed Tube for condenser trap R/171/13 Receiving flask with S-35 cup (socket) joint capacity 1000 ml. R/171/15 Evaporating Flask Kjeldhal cap. 800 ml. B-24 R/171/17 Evaporating Flask Kjeldhal cap. 500 ml. B-24 R/171/19 Evaporating Flask Kjeldhal cap. 300 ml. B-24 R/171/21 Evaporating Flask Kjeldhal cap. 100 ml. B-24 R/171/23 Tension Spring to hold condenser. R/171/25 Wire Clip to holder vapour tube and boiling flask R/171/27 Ball joint clip S-35 R/175 Rotary Vacuum evaporator, Rotavap Series Vertical Condenser, Model PBCT-8. This model of evaporator is supplied complete with geared drive unit offering smooth speed control by analog knob, Jack arrangement fitted on base unit for positioning glass assembly, Double walled water bath thermostatically controlled temp., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800 ml., receiver flask capacity one liter fitted with a ball joint, feeding tube and vapour path tube a complete working unit. The same unit can be supplied with round bottom one liter capacity evaporating flask instead of 800ml. per shape. R/175/02 Cold trap condenser double walled with S-35 Ball at bottom for connecting to receiving flask. Quick fit type joint at top of condenser. Cock for feed tube on one side while the other side will be connected to motor with ring. R/175/06 Vapour Path Tube B-24, B-29 R/175/07 Gasket Seal for Vapour Tube (VITON) R/175/11 Feed Tube for condenser trap R/175/13 Receiving flask with S-35 cup (socket) joint capacity 1000 ml. R/175/15 Evaporating Flask Kjeldhal cap. 800 ml. B-24 R/175/17 Evaporating Flask Kjeldhal cap. 500 ml. B-24 R/175/19 Evaporating Flask Kjeldhal cap. 300 ml. B-24 R/175/21 Evaporating Flask Kjeldhal cap. 100 ml. B-24 R/175/23 Tension Spring to hold condenser. R/175/25 Wire Clip to holder vapour tube and boiling flask R/175/27 Ball joint clip S-35 R/175/32 Water bath double walled inner SS with Thermostatic temperature control. R/178 Rotary Vacuum evaporator, Rotavap Series Vertical Condenser, Model PBV-7D. This model of evaporator is supplied complete with geared drive unit offering smooth speed control by analog knob, Jack arrangement fitted on base unit for positioning glass assembly, Double walled water bath having Digital temperature indicator cum controller., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800 ml., receiver flask capacity one liter fitted with a ball joint, feeding tube and vapour path tube a complete working unit. The same unit can be supplied with round bottom one liter capacity evaporating flask instead of 800ml. per shape. R/178/02 Cold trap condenser double walled with S-35 Ball at bottom for connecting to receiving flask. Quick fit type joint at top of condenser. Cock for feed tube on one side while the other side will be connected to motor with ring. R/178/06 Vapour Path Tube B-24, B-29 R/178/07 Gasket Seal for Vapour Tube (VITON) R/178/11 Feed Tube for condenser trap R/178/13 Receiving flask with S-35 cup (socket) joint capacity 1000 ml. R/178/15 Evaporating Flask Kjeldhal cap. 800 ml. B-24 R/178/17 Evaporating Flask Kjeldhal cap. 500 ml. B-24 R/178/19 Evaporating Flask Kjeldhal cap. 300 ml. B-24 R/178/21 Evaporating Flask Kjeldhal cap. 100 ml. B-24 R/178/23 Tension Spring to hold condenser. R/178/25 Wire Clip to holder vapour tube and boiling flask R/178/27 Ball joint clip S-35 R/180 Rotary Vacuum Evaporator, Model SUPERVAC (Diagonal Condenser).ALL CONTOLS AT THE PRESS OF A BUTTON. 4 line Alpha Numeric Digital display LCD screen.SIMULATANEOUS display on LCD Screen of R.P.M., Actual Temperature and Set Temperature.MOTORISED LIFT arrangement for glass assembly, Control up to 200mm. Lifting up/ down indication displayed on screen.Geared Dive Unit offers a smooth speed rotation, R.P.M. Control from 20 to 200 R.P.M. On/ off indication for Geared drive unit displayed on screen.Double walled water bath Temperature Control from ambient plus 5°C to 99°C. On/ off indication for Water bath displayed on screen.Glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800ml., receiver flask capacity one liter fitted with a ball join, feeding tube and vapour path tube a complete working until. The same unit can be supplied with round bottom one liter capacity evaporating flask instead of 800 ml. pear shape  

Rotary High Vacuum Pumps, Oil Sealed Belt driven,Air cooled, mounted on base plate with belt guard. Fitted with superior quality electric motor 220 volts A.C. single phase

Capacity : 500 L

Door Type : Top Open Door

Outer MS Powder Coated, inner water tank of rust proof S.S., built in water circulating pump with cooling coil ensures perfect cooling from 5deg C. to below ambient. Digital temperature indicator cum controller. Ideal for use with Rotary Vacuum Evaporators. SUPERFIT has carved a distinct place in the field of manufacturing and supplying of Laboratory equipment. Our skilled professionals applied all their knowledge and skills to fabricate a range that gives highly satisfying performance. These are accurately fabricated from the finest quality raw material and are available in the market with a cost effective price structure  

Power : DC supply and AC Supply

Color : Black and white

Warranty : AS per Brand differs

Color : Blue

Type : Oil Lubricant Vacuum Pumps

Number Of Stages : Single stage

Power : Ac

Material : Cast Iron

Oil Free portable vacuum cum pressure pump. A portable diaphragm type vacuum pumps cum oil-free air compressors manufactured from special grade aluminium for light weight and strength, Built in Micro Suction Filter. Catalogue no.ModelMax. Flow (lts/ min)Max. Vacuum (in. Hg.)Max. Press (Psig)Motor HP R/212/02 OFD-15-S 15 22’’ 25 1/20 R/212/06 OFD-15-D 15 27’’ 35 1/16 R/212/08 OFD-25-D 25 22’’ 25 1/16 R/212/10 OFD-45-S 45 22’’ 40 1/8 R/212/12 OFD-45-CRP 30 22’’ 20 1/8 R/212/14 OFD-45-D 45 27’’ 60 ¼ R/212/16 OFD-75-D 75 22’’ 45 ¼ R/212/18 OFD-45-FM* 45 22’’ 30 ¼ Vacuum gauge with regulatorCatalytic Hydrogenation Apparatus Low Pressure Shaker typeAcompact until for chemical reactions which require the agitation of a solution in the presence of gas under pressure up to 60 lbs. per square inch. Recommended for numerous reducation and condensation reactions which arise in the synthesis and investigation of organic compounds and which are accomplished conveniently by treatments with hydrogen in the presence of suitable catalyst.DescriptionThe apparatus consists of shaker mechanism with ¼ H.P.A.C. Electric Motor (Totally enclosed fan cooled type) or FLAMEPROOF Motor. Glass or SS reaction bottle clamp, perforated steel guard, gas pressure gauge 0 to 100 lbs. per square inch. The reaction bottle and supply tank are individually tested to 100-125 lbs. per square inch pressure. Complete with tank inlet valve assembly, three way valve assembly for use between tank and reaction bottle, 6 feet pressure tubing for connecting gas supply tank to hydrogen cylinder, 10” of pressure tubing for connecting reaction bottle to gas supply tank, tubing clamps, cord and plug.The compound gauge (pressure cum vacuum gauge) fitted over 3-way valve assembly connecting tank to reaction bottle indicates vacuum in the initial evacuation of bottle before reaction and pressure at the time of reaction Measure by means of gauge attached, affords quick and accurate method of measuring the rate of reaction and also the extent to which the reaction in the bottle has proceeded. The apparatus is fitted on a heavy M.S. base plate nicely duco painted and all other parts are chrome plated.

Heating Mantle with temperature control arrangement by energy regulator single size, these mantles are made to accommodate several sizes of round bottom and flask to provide uniform heating bigger size of mantles have two or three circuits so that upper circuits could be switched to when smaller size of flask is being heated or when the liquid level drops. Test mantles provided a maximum surface temperature of 400C working on 230 volts AC single phase.  

Handy U.V. Models for T.L.C. and other Applications requiring observation under U.V. light available in Long, Short and dual wave, also with special filter. Description Handy U.V. Lamp with long wave (365nm) U.V. light Handy U.V. Lamp with short wave (254nm) U.V. light Handy U.V. Lamp with both short and long wave U.C. light Handy U.V. Lamp having pre-filtered long wave light source and short wave source fitted with special filter.P.S.: We can supply Handy models with battery back up at extra cost. U. V. INSPECTION CABINETSU.V. Chromatography inspection cabinet for viewing and detecting separated substances on T.L.C. layers fitted with long wave (365nm) U.V. Source for use on 230 V.A.C. U.V. Inspection Cabinet (Short Wave)U.V. Chromatography inspection cabinet for viewing and detecting separated substances on T.L.C. layers fitted with short wave (254nm) U.V. Source for use on 230 V.A.C. U.V. Inspection Cabinet (Dual Wave)U.V. Cabinet with both long wave (365nm) and short wave (254 nm) tubes but without filter and a separate lamp for visible radiations Ultra Violet Flouroscence Inspection Cabinet, Dual Wave (Metal Body) Epoxy Painted Fitted with separate U.V. Tube for short wave (254 nm) through imported filter, pre-filtered U.V. tube for long wave (365 nm) and a separate lamp for visible radiations Ultra Violet Flouroscence Inspection Cabinet, Dual Wave (Fibre Body) Fitted with separate U.V. Tube for short wave (254 nm) through imported filter, pre-filtered U.V. tube for long wave (365 nm) and a separate lamp for visible radiations Ultra Violet Flouroscence Inspection Cabinet Deluxe ModelLarge illumination Area. Epoxy painted Dual wave having imported filters fitted below low pressure mercury vapour tubes for short U.V. (254 nm) and long U.V. (355 nm) Plus separate tube for white light. The low pressure mercury vapour tubes in this model facilitate immediate use for inspection as you switch on U.V. Inspection Cabinet (Triple Wave)Triple Wave U.V. Flouroscence inspection Cabinet Deluxe model Epoxy Painted with 3 separate U.V. Source one for short U.V. (254 nm) one for middle U.V. (302 nm) and one for long UV (365 nm) U.V. TRANSILLUMINATORS FOR COLLEGE & RESEARCHThis mechanism is used for slab gel electrophoresis, TLC, Forensic Examination & D.N.A. Analysis. Transilluminators provide ultraviolet illumination from beneath the sample. The can be used in conjunction with a U.V. viewing cabinet to give grater intensity of illumination. Universal U.V. transilluminators with filter, 302 nmProvides extremely high irradiation to examine weakly excitable samples, strong mild steel (M.S.) body epoxy coated by electrostatic powder-spray and fusion by heat, with barrier filter and interlocked cover for eye safety and safety against irradiation of operator.Window area 50x 75 mm for middle wave 302 ultra violet having 2 MID-UV tubes fitted with high efficiency UV filter to prevent visible light from UV sources reaching the sample and thereby allowing the faintest fluorescence phenomenon to be detected. U.V. transilluminators 360nm, 6 tubesExternal case is made of thick steel epoxy paint, Window covered with fixed U.V. transparent sheet, six 360nm. U.V. source are fixed beneath the window. An exhaust fan is fixed for cooling. The hinged eye protective U.V. obstruction cover provided with this mechanism is meant for covering the entire window. U.V. transilluminators 312nm, 6 tubesSame as R/350/06 but 312nm Tubes. U.V. Transilluminators (Dual Model)This is a conjuct mechanism of ultra violet & White light Sources. U.V. can be used to examine slab gel electrophoresis, TLC, D.N.A. & Nucleic Acids. White light section can be used for viewing coomassie blue stained gel, silver stained proteins gels, autoradigraphs & Microtiter plates.This mechanism has two windows, one covered with U.V. transparent sheet & the other is covered with white translucent sheet, six 360nm U.V. sources & four white light sources are fixed beneath the windows. An exhaust fan is fixed for cooling, the hinged eye protective U.V. obstruction cover is provided for U.V. source it covers both the windows.

Color : Variable