Surgical Equipment Dealers in Ambarnath, Mumbai

• Material: PVC
• Categories: Bronchoscopes
• Diameter Of Insertion Tube: 9.8 mm
• Working Length: 1030 mm
• Total Length: 1350 mm

Conventional Safety Relief Valves are those which work on simple working principle of force balance. The operation of a conventional spring-loaded PSV/SRV is based on a force balance principle. Under normal operating conditions, until the pressure at the inlet is below the set pressure or opening pressure, the disc is seated on the nozzle preventing flow through the nozzle. When the pressure at inlet exceeds set pressure/opening pressure, then pressure force on the bottom of disc overcomes the spring force, lifts the disc affecting opening of valve and relieves the excessive pressure in system.   When the inlet pressure drops sufficiently below the set pressure / opening pressure, the spring force overcomes the pressure force, the disc re-seats on nozzle and valve closes.   In REGPORT conventional Safety Relief Valves, an adjustable Blow Down Ring is provided for adjusting the opening in the annular orifice, thus controlling the pressure build-up in the huddling chamber. This controlled pressure build-up in the huddling chamber will overcome the spring force causing the disc to move away from the nozzle seat, and the valve will pop open. With this, fine adjustment in over pressure and blow down can be done. As a standard, unless specified, all our Safety Relief Valves are Full Nozzle Full Lift and tested for 10% over pressure. Following Series of Models are supplied

Specifications : Air Headers are ideal for centralized multiple connections of instrument air distribution network to field mounted instruments. We offer range of Air Headers that are suitable for use with multiple outlets. The inlet-connection of these air headers are of flange or screwable type. A drain-valve can be provided as per customer need. We provide ¼" Brass Needle valves for GI Air Headers distribution ports. The SS 316/304 Air Headers distribution ports are provided with ¼" SS 316/304 Needle valves. We provide NPT Threads & Socket Weld as per ANSI specifications.  

We supply high pressure and High temperature Autoclaves specially for the corrosion studies. The Autoclaves are available in various sizes from 0.5 lit to 50 litres. The standard size is 2 litres. The system is used to simulate the harsh field conditions in the lab and to test the materials corrosive response in it. We create the field conditioned by having the required temperature, pressure, flow rate, gas concentration, process chemical conditions and study the impact of these conditions on the material.

• Optional accessories for Stretcher Trolleys :: Mi 1080: Oxygen cylinder holder (MS) and Mi 1068: IV rod with two hooks - SS

Overall approx. dimension: 2030 mm L x 620 mm W x 880 mm H Stretcher top approx. dimension: 2030 mm L x 520 mm W Strong mild steel tubular construction Removable SS stretcher top supported on tubular frame Four heavy duty castors 150 mm dia, two with brake Pretreated and powder coated finish

• Material: Steel
• Shape: Rectangular
• Voltage: 220V
• Width: 60mm, 80mm
• Packaging Type: Carton Box
• Thickness: 0.01mm, 5mm
• Frequency: 50/60 Hz

In a large ware house or store different items like food products, food grains, chemicals or medicines are stored for long time. It is essential to keep these products free of moisture, dust and heat. Because of such ventilators fresh air is continuously circulated thus keeping the atmosphere cool and dust free. Also they Increase life of roofing sheets, allowing workers a pollution free healthy environment increasing productivity level. Continuous Air Circulation removes humidity emitting out of food grains and chemical drums keeping the environment fresh and dry.  

• Packaging Type: Roll
• Brand Name: Pinnacle
• Width: 5-60 cm
• Material: Grade of medical paper
• Sterilization: ETO,Steam,Radiation
• Length: 200 m

• Driven Type: Electric
• Condition: New
• AC Power Input: 100 Vac, 240 Vac
• Feature: Double Flow With Low Oxygen, Inbuilt Nebulising Function, Purity Alarm, Timer Facility.
• Capacity: 10L, 5L
• Type: Oxygen Concentrators
• Frequency: 50Hz, 60Hz
• Country of Origin: India
• Operation Mode: Portable
• Sound: 0-25Dba, 25-50Dba

As a dependable name from Kalyan(India), we make available our products to every nook and corner ensuring complete customer satisfaction. Owing to our wide distribution network and the fastest transit system, buyers can receive their orders on timely basis.

Multi-Air Manifold, dish ends, Chemical Storage Tank, sand blaster

We are renowned as one of the leading Electrosurgical Cautery Unit Manufacturers and Suppliers in India. Our Electrosurgical Cautery Unit is used for carrying out monopolar and bipolar surgery, especially in endoscopy. The calibre-300dx Electrosurgical Cautery Unit is offered by us at the most competitive prices. Advantages The operation modality and the output control selection are made simple, by using keys that are provided with iconographic descriptionAll the indications of operative condition and of selected output level are shown in digital bright display

• Type: Vertical
• Application: Laboratory Use
• Frequency: 50Hz
• Power: 1kw
• Warranty: 1yrs

Features : Autoclaves vary in size, shape and functionality. A very basic autoclave is similar to a pressure cooker; both use the power of steam to kill bacteria, spores and germs resistant to boiling water and powerful detergents. One of the things that sets steam autoclaves apart from other sterilizers is its automatic lock feature. Since an autoclave is a sterilizer, its purpose is like sterilizers-to kill or remove all forms of life on an object's surface such as bacteria, fungi, viruses, and spores. While autoclaves solely utilize steam to disinfect, other sterilizers can use chemicals, high pressure, filtration, irritation, or a combination of these methods to eliminate living organisms. Not all sterilizers can be autoclaves sterilizers because not every device can withstand the high temperatures needed to kill every organism. If someone was to use a different type of equipment the material could melt and morph making it unusable. An autoclave chamber sterilizes medical or laboratory instruments by heating them above the boiling point. Krew Instruments Pvt Ltd’s have tabletop as well as large autoclaves which can process numerous surgical instruments in a single sterilization cycle, meeting the ongoing demand for sterile equipment in operating rooms and emergency wards.

We are engaged in fulfilling the requirement of Gas Manifold by various industries. Our Gas Manifold has garnered widespread acclaim for its sturdy construction and efficient performance. We package the Gas Manifold in durable material so that there is no risk of damage during transit throughout country. That is why we are a celebrated Manufacturer and Supplier of Gas Manifold from Mumbai, Maharashtra.

George Philips is the leading supplier and manufacturer for highly quality Ventilator Circuits, and Ventilator Tube Circuit, which are made of medical Grade Corrugated PVC.

  Pressure Gauge   Industrial Grade Pressure Gauge Model No : FITZER / PG / 100 Catalogue

• Capacity: 760+10 mm Hg regulable at 60 Ltrs/min.
• Power: 230V Ac. 50 Hz.
• Vacuum Gauge: 2 Bcpm 0-760 mm Hg Calibration
• Noise level: 50 dB A+3 at 1.2 Ltrs.

• Country of Origin: Made in India
• Material: Stainless Steel
• Usage: Laboratory
• Chamber Volume: 10 L
• Shape: Cylindrical
• Brand Name: Dhiraj Traders
• Power Consumption: 1.5 KW
• Display: Digital
• Insulation Wall: Double
• Material Grade: SS 206
• Automation Grade: Automatic