Surgical Equipment Dealers in Prabhadevi, Mumbai

Fixed height, Aluminium top & M.S. frame (Supplied with 25 mm mattress, Saline rod, Oxygen cylinder cage), Made of mild steel powder coated. With Alu. top & MS frame with 25 mm thick mattress.With 15.0 cm heavy duty castors, 2 nos. with brakes.

Features :Micro Processor for Process Operations with 10 ProgrammeHepa Filtered Air Module in Inlet. S.S. Construction8 Chanel Temperaturescanning with Processormimic Display On Control PanelDoor Inter Lockinghelps for Fault FindingCooling Attachment for Rapid Cooling.Heaters Accessed from Non-sterile Side. Complete GMP Model

The front loading double lock outlet (oxygen) is a work of perfection, made by state of the art technology. Robust construction and smooth finishing of the front loading double lock outlet (oxygen) has made it a much sought after terminal outlet in the market.

• Insertion Tube Diameter (mm): 4.9
• Instrument Channel Diameter * (mm): 2.1
• Working Length (mm): 300
• Total Length (mm): 580
• Angle of View (°): 75
• Focal Range (mm): 3 – 50
• Angulation (Up / Down) (°): 130 – 130

Fiber Naso‑Pharyngo‑Laryngoscopes : The Pentax Medical FNL product series offers a full range of conventional and portable fiberoptic scopes for high-quality and cost-effective endoscopic ENT examinations. Pentax Medical engineers fiberscopes to enhance optical quality and endoscope durability. These cost-effective options are reliable, well-engineered, and support efficient diagnosis and therapy. Superfine images, consistent high quality - Pentax Medical’s proprietary Superfine fiber technology increases the number of optical fibers in the endoscope for better image resolution and color discrimination. The hexagonal close-packed fiber arrangement protects individual fibers from damage to maintain consistent high-quality imaging over time. These bright, clear images support enhanced observation and precise diagnosis. Engineered for comfortable efficiency - The maximum flexibility of Pentax Medical insertion tubes makes maneuvering in laryngeal anatomy easier for physicians and more comfortable for patients. The careful engineering of Pentax Medical’s insertion tubes provides improved handling and allows maximum insertion and easy intubation. Convenient, portable light source options - The FNL-10RBS fiberscope provides a variety of illumination source options. Because healthcare providers can attach a lightweight battery/lamp unit (BS-LL1) with the FNL -10RBS, they can perform routine bedside or emergency procedures without any other electrical outlet source, cables, or cords.

• Size:  40 x 50 NB, 50 x 80 NB, 80 x 100 NB & 100 x 150 NB
• MOC: Cast steel body (WCB) with SS internals
• End con.: Flanged to ASA 300 Class IBR
•  : Operating parameters :
•  : Min. working pressure-0.5 Kg/Cm�
•  : Max. working pressure-35 Kg/Cm�Max. 
•  : Working temperature-399 Deg. C.

Ordinary Lift Safety Valve/ Bolted Bonnet Safety Valve Are you looking for a Suitable Supplier for Bolted Bonnet Safety Valves? Various Bolted Bonnet Safety Valves Bolted Bonnet Safety Valvesstandards full range,fast delivery, contact Global Steel & Engg for all types of Bolted Bonnet Safety Valves. , Bolted Bonnet Safety Valves suppliers with a wide range of Stainles Steel Bolted Bonnet Safety Valves, Bronze Bolted Bonnet Safety Valves, Cast Steel Bolted Bonnet Safety Valves, Cast Iron Bolted Bonnet Safety Valves, The strength of our company lies in the strength of personnel who produce quality work. We believe in cohesiveness and team effort. The company is following the policy of continuous up-gradation of technology and processes while maintaining its cost effectiveness by making optimum use of its resources and goodwill.

• Size: 10-15inch, 15-20inch, 20-25inch, 5-10inch
• Shape: Round
• Application: Operation Theater
• Certification: ISI, ISO 9001:2008 Certified
• Color: Grey, White
• Voltage: 220V, 240V
• Power Source: Battery, Electric
• Lighting Source: LED
• Positioning: Ceiling Mounted, Wall Mounted

• Type: Automatic
• Certification: CE Certified
• Voltage: 380V
• Driven Type: Electric
• Application: Metal Marking
• After-Sales Service Provided: Spare Parts

1. High quality fiber generator, good quality spot, optical power density uniform, stable output optical power, meets the application demand of mainstream market; 2. Han’s Yueming self-developed digital high-speed galvanometer scanner, small size, high speed and excellent stability; the performance reaches the international advanced level; 3. Powerful control system, optimizes the processing data according to various application, supports multi language switch, and up to 256 color layer management functions, meets the application requirements of most industries 4.Permanent Marking Processing is perfect for products which are manufactured and requires store record, identify record, process management, and other critical information. It will not wear off or peel off, because it is marked directly into the product. 5.direct marking process with no contact with material minimize damage to the product and enhance the fine quality in detail processing and Marking. 6. Environment-friendly Processing/Marking There is no ink, and therefore no solvent; no adhesive label, and therefore no backing paper, no waste disposal.

Features A quick health monitor for your Bearings & other equipment Comes complete with its main unit, Head phone set, A flexible probe, Battery set in a special carrying case. This is a new generation unit with ultra sensitive microphone and amplifier. Incorporates a db meter, monitor, with 7 levels of sound control setting from 60 db to 120 db. It also has a special adjustable High / Low volume control.   Advantages This is an advanced electronic stethoscope, providing full range of sounds needed in all industrial applications. It senses the faintest vibrations and identifies the source of noise and the location of the defective part. 7 sound level control settings enables the operator to select the correct frequency from 60 db to 120 db and offering clarity and versatility of sounds hitherto unmatched for. This unique product is used to detect bad bearings, bushings, chipped gear teeth, exhaust leaks, wind and water leaks etc.

Manufactured using patented PureSat Oximeter technology from Nonin Medical Inc., USA Provides fast & reliable SpO2 and Pulse rate measurements on any patient, from neonates to adults Bright, easy-to read LED displays indicate SpO2 and Pulse rate measurements User selectable High/Low Alarm limits for all parameters 8 segment bargraph indicates pulse strength Sensor Alarm indicates that the sensor has been disconnected either from patient or from oximeter Pulse Beep is sounded for every detected pulse, with the tone varying according to SpO2 value 3 Colour Perfusion LED – Green (good perfusion), Orange (marginal perfusion) & Red (inadequate perfusion) Trends available for 11 patients - upto 24 hours for each patient Built-in Rechargeable Battery with a battery back-up of more than 10 hours Audible & Visual Low battery indication when 15 minutes remaining Ideally suited for Spot Checking, during emergency air or land transport, Operation Theatres, ICU, Outpatient clinics or Emergency rooms Wide range of sensors available with most of the sensor having 3 meter cable lengths

• Country of Origin: Made in India
• Tube Length: 210 Cm
• Patient Type: Paediatric, Neonatal, Adult
• Cannula Prolong Style: Curved Prong
• Application: Hospital
• Brand Name: Romsons
• Automation Grade: Manual

•  Horizontal Cylindrical high pressure steam sterilizer : Size
• Model: Volume
• Power load: 400mm Dia x 900mm Depth (16” Dia x 36” Depth) (To accommodate 3 drums)
• SK 36: 150 Litres
• 9 k. w: Model of Heating single
• Electrically operated on 440/230 Volts, three /  Phase with neutral link, A.C. supply, 50 Hz and proper earthing.: Number of door
• Single door hinged type: Working pressure
• 1.2 kgf/ cm²g. (15 to 17 p.s.i.): Working temperature
• 121ºC to 125ºC: Hydraulic test pressure

Applicable gas                      :Oxygen Max.Inlet pressure (kg/cm2)  :150 Max.Outlet pressure (kg/cm2) : 12.5 Rate of flow (m3/h)                : 40 Inlet connection                     : G5/8″ Outlet connection                   : G3/8″

Advanced Micro-controller based Single input Input RTD-PT 100 0.2% full scale accuracy 0.1% linearity Water level input with Audio visual alarm Programmable sock time Relay output for pressure released valve Manual start stop Supplyv: 12VDC to 36VDC

• Size: Large, Medium, Small.
• Type: Oxygen Masks
• Material: Plastic, PVC
• Application: Clinic, Hospital, Laboratory
• Application: Anesthesia, Hospital, Oxygen Supply
• Color: Green, Transparent., White
• Feature: Adjustable, Comfortable, Disposable, Easy To Wear, Nice Fit, Provide Artificial Respiration
• Pattern: Elastic Headloop

• Brand Name: ChoiceMMed 
• Feature: Innovative non-invasive technology for instant oxygen level. Accuracy and precision on all users. Favorable performance in various environments, Small, stylish, durable and easy-to-use, Energy-saving design provides a secure and reliable aid.
• Pack Size: 1 pc
• Model: MD300C636

• Type: Laser Engraving Machine
• Certification: CE Certified, ISO 9001:2008
• Color: Black, Light Red, Sky Blue
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual
• Power: 1-3kw, 3-6kw, 6-9kw
• Driven Type: Electric

As the well known manufacturer and supplier of Horizontal High Pressure Steam Sterilizer. These machines are used for medicine implantation, high-volume parenteral courses of action squeezed in settled compartments (e.g.PVC, PE, PP bottles, glass containers or plastic sacks or pocket, Filled PP, PE, PVC syringes and Ampoules) with no kind of contamination. This is the best machine used for the treatment of packaged nutritional items with cleansing cycle. Also, the offered range of Horizontal High Pressure Steam Sterilizer is available from us at market leading rates. Features : Single or two fold gateway with Sliding or Hinged portal choices. A ventilator is a rectangular or round and empty weight vessel with warmth exchangers at the edge back and forth movement supported by changed u formed load improvement at the base of the ventilator. A midway places impeller nearby the glow exchanger circles and the chamber befuddle at the base contain the circulation structure. This ensures high stream speed of steam air mix in the midst of the warming time allotment and the pined for temperature achievement and consistency for purifying article is in like manner accomplished. Dispersion of the steam air mix moreover causes essential weight changing appropriately keeping any deformation of the versatile load. Anticipate foundation on the floor for stacking with in-chamber and trade trolley) or pit mounted for stacking at floor level with in/out trolleys or modified stacking or exhausting units. Single or two fold portal with Sliding or Hinged gateway decisions to suit client specific necessities. Round and empty single-divider load in exceptionally total AISI 316L stainless steel. Chamber piping and fittings in AISI 316L stainless steel, Tri-clover secure affiliation. Weight Monitoring inside the chamber by weight transmitter. Customized Printing office for control in case of warmth labile materials. The touch-screen for visual process control and relationship for measuring signs and printers. Remote support affiliation Contamination Seal to thwart cross-stream of air between the clean and un-clean region. Endorsement ports for expansion of temperature sensors for thermometric testing.

• Packaging Details: Laminated box inside thermacoal packing
• Supply Ability: 50 Set/Sets per Month
• Place of Origin: Maharashtra, India
• Model Number: SC-01

We are the main supplier of this product.

• Application: Industrial
• Material: Mild Steel
• Brand Name: Numac Hitech
• Power: 1 kW
• Warranty: 1 Year
• Laser Type: Fiber Laser
• Marking Depth: 0.25 mm
• Impact Frequency: 50 Hz
• Repeated Accuracy: +/- 0.25
• Marking Speed Capacity: 6000 mm/s
• Automation Grade: Semi-Automatic
• Weight: 20 kG

• Brand Name: EXCEL
• Material: As per customer’s Requirement
• Pressure: As per customer’s Requirement
• Country of Origin: India

We are engaged in manufacturing and exporting an extensive range of Air Headers to our valuable clients. Offered in varied sizes, these headers are offered withselector switches, condensing pots, gauge savers and melt bolts. Our range stands on international quality standards and is widely acclaimed for their easy installation, dimensional accuracy, chemical resistance, optimum performance, leakage proof nature and corrosion resistance nature.