Surgical Equipment Dealers in Sewri, Mumbai

• USES: Sterilizers are ideal for Hospitals, Research Laboratory, and other Pharmaceutical Industry
• CONSTRUCTION: stainless steel 316
• AVAILABLE CAPACITIES: 50 Ltrs to 5000 Ltrs.
• Working temperature: 121°C (up graded up to 135°C)
• Sterilization Period: 20 to 25 Minutes
• SAFETY FEATURES: Vacuum Breaker, Heavy-duty safety valves, When the Chamber is under pressure
• Design: Rectangular & Cylindrical Type
• Working Pressure: Variable 5 to 30 PSI
• Internal Chamber: Corrosion Resistant Stainless Steel
• External Chamber: Corrosion Resistant 304 Grade Stainless Steel, Painted
• Door: Single or Double Doors w/ automatic pressure locking
• Insulation: Glass wool Fiber
• Steam Exhaust: 5 to 7 Minutes
• Power Supply: 220 Volts / 440 Volts

The Medium Duty Electric Models Feature:   Fully Automatic Controls—Fast acting surface-mount thermostat forautomatic temperature control. Factory installed sensitive manual resetenergy cut-off for safety to prevent overheating. (Maximum thermostatsetting is 185°F Direct Heat Transfer With Three Immersed Incoloy Elements—Transfersheat directly and efficiently to the water. Screw-in style element. Factory Installed Hydrojet® Total Performance System—Cold water inlet sediment reduction device helps minimize sediment build up in tank. Increases first hour delivery of hot water while minimizing temperature build up at top of tank. Vitraglas® Lining—Bradford White water heater tanks are protected from the corrosive effects of hot water by an exclusive ceramic porcelain-like coating. The Bradford White high silica Vitraglas® lining provides a tough interior surface for our hot water tanks. 2" Non-CFC Foam Insulation—Covers the side and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiency and jacket rigidity. Water Connections—11⁄4" NPT factory installed true dielectric fittings extend water heater life and eases installation. Conversion Kits—Design certified by UL for field conversion. Conversion kits are available to convert any one model to a variety of voltages, kW inputs and wire phase. (kit part numbers on reverse side.) Protective Magnesium Anode Rod—Provides added protection against corrosion for long trouble-free service. Steel Tank—Heavy gauge steel automatically formed, rolled and welded. T&P Relief Valve—Supplied.  Brass Drain Valve.

Advanced Micro-controller based Single input Input RTD-PT 100 0.2% full scale accuracy 0.1% linearity Water level input with Audio visual alarm Programmable sock time Relay output for pressure released valve Manual start stop Supplyv: 12VDC to 36VDC

• Material: Mild Steel
• Application: Industrial
• Accuracy: ± 1.5 % & ± 1%.
• Application: Used to Measure the Pressure of Fluids and Liquids in Various Industries.
• Condition: New
• Certificate: CE Certified
• Colour: White

• Size: 10inch, 12inch, 4inch, 6inch, 8inch
• Diameter: 10-20mm, 30-40mm
• Application: Medical Gas
• Thickness: 1.5-2mm, 2.5-3mm, 4.5-5mm, 5.5-6mm
• Length: 100-150mm, 150-200mm, 50-100mm
• Feature: Best Quality, Corrosion Proof, Crack Proof, Durable, Flexible, Light Weight

To offer a safe provision of medical gases, we bring forth high efficiency Medical Gas Pipeline System. Our Medical Gas Pipeline is perfect to transfer the gases from one place to another, as it overcomes the problems pertaining to the use of cylinders. Only high quality materials are used for the manufacturing of pipes of our Medical Gas Pipeline System. We are counted among the dominant Gas Pipeline Suppliers based in India. Material Quality Solid drawn Seamless Deoxidized Non-arsenical Half hard Tempered Degreased Conforming to HTM 2022 standards Pipe Sizes 28mm OD x 1.2 mm thick 22mm OD x 0.9 mm thick 15mm OD x 0.9 mm thick 12mm OD x 0.7 mm thick Specifications Fittings used for connecting copper tubing are made of Copper and brazed type Connection as per BS: 864: Part 2:1983 All pipe-jointing fittings are made of Copper as per BS 864 Standards and suitable for a steam of working pressure of 17 bars and especially made for brazed socket type connections. Shut off valves suitable for the pipe diameter are of non lubricated 90° turn lever & having stainless steel hard chrome brass body with PTFE seat and S.S. ball. Sizes will be appropriate for copper pipes with screw threaded ends and brass adapter.All valves are pneumatically tested for twice the working pressure and degreased for medical gas service before supply. Features Cost effective Convenient Alarm system for timely detection Endurance against high pressure Easy to maintain

• Type: Digital Blood Pressure Monitor
• Application: Blood Pressure Reading
• Color: Creamy, Light White, Off White
• Feature: Accuracy, Battery Indicator, Digital Display, Easy To Carry, Light Weight, Low Battery Consumption
• Condition: New
• Driven Type: Battery

We are the main supplier of this product.

MRI Pulse Oximeter 3600 Features Emco Meditek has been manufacturing Pulse Oximeters since 1989, with an installation base of more than 8000 Pulse Oximeters. Now comes the EMCO oxi-mri 3600 MRI Compatible Pulse Oximeter incorporating fiber optic SpO2 sensor, for MRI environment compatibility 20 feet Fiber Optic Sensor (non-magnetic) avoids potentially hazardous heating or image artefacts during MR Scans Suitable for use in 0.5 to 3 Tesla MRI environment Noise/Artefact free MR images Bright LED & LCD display which is easily visible from MRI Console Room Built-In Rechargeable Battery back-up of 6 hours (approx. 8 procedures) Alarm for sensor disconnection either from patient or from oximeter Provides fast & reliable SpO2 and Pulse rate measurements Suitable for Adult, Paediatric & Neonate Audible & Visual Low battery indication

• Type: Automatic
• Certification: CE Certified
• Voltage: 380V
• Driven Type: Electric
• Application: Metal Marking
• After-Sales Service Provided: Spare Parts

1. High quality fiber generator, good quality spot, optical power density uniform, stable output optical power, meets the application demand of mainstream market; 2. Han’s Yueming self-developed digital high-speed galvanometer scanner, small size, high speed and excellent stability; the performance reaches the international advanced level; 3. Powerful control system, optimizes the processing data according to various application, supports multi language switch, and up to 256 color layer management functions, meets the application requirements of most industries 4.Permanent Marking Processing is perfect for products which are manufactured and requires store record, identify record, process management, and other critical information. It will not wear off or peel off, because it is marked directly into the product. 5.direct marking process with no contact with material minimize damage to the product and enhance the fine quality in detail processing and Marking. 6. Environment-friendly Processing/Marking There is no ink, and therefore no solvent; no adhesive label, and therefore no backing paper, no waste disposal.

• Country of Origin: Made in India
• Tube Length: 210 Cm
• Patient Type: Paediatric, Neonatal, Adult
• Cannula Prolong Style: Curved Prong
• Application: Hospital
• Brand Name: Romsons
• Automation Grade: Manual

Applicable gas                      :Oxygen Max.Inlet pressure (kg/cm2)  :150 Max.Outlet pressure (kg/cm2) : 12.5 Rate of flow (m3/h)                : 40 Inlet connection                     : G5/8″ Outlet connection                   : G3/8″

• Size: 10-15inch, 15-20inch, 20-25inch, 5-10inch
• Shape: Round
• Application: Operation Theater
• Certification: ISI, ISO 9001:2008 Certified
• Color: Grey, White
• Voltage: 220V, 240V
• Power Source: Battery, Electric
• Lighting Source: LED
• Positioning: Ceiling Mounted, Wall Mounted

• Application: Industrial
• Material: Mild Steel
• Brand Name: Numac Hitech
• Power: 1 kW
• Warranty: 1 Year
• Laser Type: Fiber Laser
• Marking Depth: 0.25 mm
• Impact Frequency: 50 Hz
• Repeated Accuracy: +/- 0.25
• Marking Speed Capacity: 6000 mm/s
• Automation Grade: Semi-Automatic
• Weight: 20 kG

Tabletop / Portable Pulse Oximeter Easy to use : Intuitive, color coded displays Versatile : Monitor Neonates to adults; acute care to homecare Powerful: Minimum 6 hour battery life Intelligent: Nonin’s Next Generation PureSAT signal processing technology Convenient: Compact, light weight & Durable

The Acetylene Plants from Sanghi Organization are of indigenous manufacture. Every part has been carefully designed by experienced engineers. These parts are made of the best material. Every part has been accurately made and carefully inspected before assembly. Each unit, after assembly is charged and worked continuously to check its performance. You are, therefore, assured of an efficient and dependable acetylene plant. This Acetylene Plant from SANGHI ORGANIZATION is of an advanced design, incorporating several features not ordinarily found in other generators. This one is a fully automatic plant with twin hoppers (and needs an operators' attention for only ten minutes in an hour). All operations are performed by pneumatically contolled valves, assisted by highly sensitive sensors, integral with the temperature control instruments. These in turn open the water inlet valve or residue drain valve etc. Two hydraulic pumps help to open and close the supply of calcium carbide. This is fed into the generator by screw feed conveyors. The screw feed mechanism and the agitator are operated by flame-proof motors and fittings.       The entire operation is perfectly synchronised to give maximum efficiency and simplicity in operation. Any failure, whether it is of power supply, water, instruments air, is signalled visually and also audibly when an alarm bell rings to alert the operator. Only flame proof lights and electrical fittings according to IS2148-68 (Group II) or BSS-229 may be used in an acetylene plant building. Acetylene cylinders must be of specification IS: 7312: 1974 or ICC:8. The design of the entire plant has been made with safety in mind. Flash Back Arrestors, High Pressure Reverse Flow check valves, safety valves and complete gauging help protect both equipment and personnel. Various auto controls, safety valves, auto vent valves, non-return valves and Flash Back Arrestors are also provided to make this plant absolutely safe to operate in all conditions.

The Liquid Oxygen Pump is a single acting piston pump. It is used for filling Oxygen into Cylinders upto a pressure of 165 kgs./cm2. SANGHI - ORG Liquid Oxygen Pump The pump is designed for assembly in air separation unit that works by pumping liquid Oxygen and gasifying the same in Heat Exchangers for final filling as gas in Cylinders. Control of liquid feed is not necessary, because the pump is designed in accordance with the plant size and the liquid produced is constantly pumped off. The drive unit is similar to any reciprocating machine with the Crank Shaft, Flywheel, Connecting Rod, Cross Head, etc. The Liquid Oxygen Pump consists of a stainless steel inside liner with liquid inlet and evaporated gas outlet ports. There are no valves on these ports, which are closed by the piston itself on the pressure stroke. The third outlet is the main discharge outlet with the two non-return ball valves. The two ball valves remain firmly closed during suction stroke, due to high pressure in partly filled cylinders. To ensure that these valves are fully closed, a positive pressure of about 60 kgs/cms2 must be maintained on it. When a fresh batch of cylinders is taken for filling, open the manifold valve slowly or use a spare batch of cylinders to ensure positive pressure on these valves.  

• Brand Name: Wika,Mass,Ashcroft,Fiebig,ITEC
• Measuring Range: 0-1000 bar (max)
• Material: SS, Phosphor Bronze
• Connection: Bottom Conn., Back Conn., Panel Mounting
• Usage/Application: Industrial
• Diameter: 1-1/2" to 6"

• Voltage: 220v/50hz
• Power: 220v/50hz
• Weight: 6 kg
• Automation Grade: Semi-Automatic
• Color: White
• Usage/Application: Professional
• Material: ABS
• Model Name/Number: DC01
• Brand: dr glow
• Is It Portable: Portable

• Size: 11/2" / 2" - SCH40 / SCH80
• M.O.C: SS316 / SS304 / CS
• Distribution Ports: Size -¼" / ½" , Ports - 6 / 8 / 10 / 12 / 16

We offer Air Headers that replace many unit valve assemblies that normally operate from one source. The Air Headers are suitable for use with a variety of outlet take-off valves. The inlet-connection can be screw-able. The drain-valve of the system is at the manifold exit and the manifolds can be supplied with a bracket or U clamp for ease of wall mounting.

SALIENT FEATURES Specialized for Bariatric Surgery 100% Life Saving due to low voltage Electricity Supply. Offline Battery Back-Up. 800 lb. weight capacity. Full Table Functions, F ull Articulation Capability. Removable Leg section. F ull Body imaging without special accessories. Durable one—touch pendant control. Electrically Controlled Height , Trendelenburg. Radiolucent table top Section seamless moulded mattress Support on a heavy base column covered with stainless steel sheet. ACCESSORIES OF O. T TABLE Anaesthetic Frame (1Pcs) Padded Side Supports (1 Pair) Intravenous Armboard (1 Pair) Padded Shoulder Supports (1 Pair) Knee Crutches (1 Pair) One Matters Set Thickness 50mm

Applications: Standard portable autoclaves are ideal for all applications requiring routine total destruction of all living organism.Ideal for Doctors, Primary Health Centres and also as a stand by unit. Advantages: A seamless (joint less) body provides a sturdy and tension free Autoclave which can safely be operated repeatedly even in remote places. Automatic purging for efficient sterilization. Comes with an additional Safety Valve for added safety. Die pressed seamless body of stainless steel Hydraulically die pressed lid from stainless steel plate. Supplied with Stainless steel dressing drum and X stand.

Electrosurgical Cautery Machine offeredcomes with maximum short-term cutting power of 300420 watt and 82 types of cutting current of which 62 mono polar.

• Patient Type: Paediatric, Neonatal, Adult
• Cannula Prolong Style: Curved Prong
• Tube Length: 210 cm
• Brand Name: Romsons
• Country of Origin: Made in India
• Usage/Application: Hospital
• Grade: Manufactured from soft,light weight non toxic material.
• Automation Grade: Manual

We are Maharashtra(India) based entity and have become a primary choice of the buyers owing to our timeliness. We are backed with highly experience packaging experts and team members; they ensure that the packaging is done with utmost proficiency and keeping in mind the globally accepted norms.

NAT's pharmaceutical sterilizers have been engineered and manufactured in compliance with the cGMP regulations to meet the technical challenges of the pharmaceutical and biotech industries. Your products will be reliably and consistently sterilized according to the highest international standards with every cycle when using a NAT's pharmaceutical autoclave. NAT provides high quality & safe autoclaves made from reliable long lasting components, and designed to conform to end-user requirements (URS) for production and quality assurance processes.   Empty glass ware : e.g. Vials, ampoules, glass bottles etc. • Laboratory vessels : decontamination and depyrogenation of pre-sterilized products prior to using in a clean laboratory environment. • Metal trays and containers. • Metal machine accessories / parts. • Material sensitive to humidity. • Non-aqueous liquids. • Thermo - stable basic pharmaceutical product and chemical compounds. • For Health Care application : Dental equipment, Metal orthopedic components for replacement of hips, knee, shoulder, metal surgical rods, metal staples etc.

Endotech is Authorized Distributor for ELEPS Russia for Rigid Endoscopes & Equipments, OLIVE Medical USA for High Definition Laproscopy Equipments, Shanghai Aohua Aohua Photoelectricity Co. Ltd. For Flexible Endoscopes.

The image is transmitted by a fiber-optic bundle. This is made up of a huge number of fine glass or plastic fibers. Image pixels are transmitted by individual fibers probes and are then re-aligned at the eyepiece to form the high-resolution image. Standard models include diameters of 4mm and 6mm with lengths upto 1000 and 2000 mm respectively Semi flexible endoscope length 1000mm and diameter 6mm. Flex and twist endoscope length 740mm and diameter 4mm.

  The Seetru range of safety valves for liquid applications has been designed to be compact and highly effi cient. The bubble-tightsealing performance makes these valves suitable for many liquid applications including; hydraulic systems, pumping systems,thermal relief, chemical storage, waste water management, oil transfer, petrochemical industry, fi re fi ghting equipment and watercooling systems. Suitable for temperatures up to 250 °C. The valves are GOST/RTN approved and comply with the requirements of Pressure Equipment Directive 97/2/EC (CE Marked).This range of valves has the option of either elastomer sealing or metal-to-metal sealing.

• Capacity: NO. OF SHELVES BASKET
• CAT NO.: VESSEL CHAMBER SIZE
• WATTS: STEAM SOURCE/SUPPLY
• CIC – 127 AA: 14" Dia x 22" Depth
• 55 Ltrs.: 2 Nos.
• 2.5 k.w.: Direct
• CIC - 127 BB: 18" Dia x 28" Depth
• 125 Ltrs.: 2 Nos. 
• 3.5 k.w.: Direct  

Fully Automatic Autoclave – most useful to sterilizer Lab glassware, Plastic Tubing, Liquid in sealed glass containers and many more uses. Fully Argon welded to avoid steam and pressure leak. Double walled in construction with InnerSS 304 & Outer SS 304 Matt/Buff or mirror finish. A Special Box Type outer SS 304 body is provided with state of art control panel to avoid direct heated contact with main Jackett and double walled body of autoclave. A unique single lever lock ensures easy lifting & closure of Autoclave door without leakage of Vacuum & Pressure. The Temp. is being controlled by Microprocessor based PID Temp. Controller with Dual Digital Indicator and PT – 100 sensor. The cycle begins with press of a start Switch for fully automatic operation. Automatic steam and air exhaust at end of cycle. Specially designed heaters reduces power consumption. Removable SS wire mesh/rod carrier supported on footed, SS frame in-built. Water low level Alarm indication and heater cutt off facility. Lid is equipped with pressure guage range 0 to 20 PSI, safety value, and manual exhaust valve. Safety valve, Steam release Exhaust Valve, Vacuum breaker – for more safety.

• Type: Pulse Oximeters
• Material: Pl, PVC
• Certification: CE Certified, ISO Certified
• Application: Medical Use
• Weight: 0-50gm, 100-150gm, 150-200gm, 50-100gm
• Color: Black, Blue, Cream, Gray, Red, White
• Voltage: 3-6VDC, 6-9VDC, 9-12VDC
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Material: HDPE, LDPE, Plastic, PVC
• Driven Type: Battery
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Year, 2Years
• Automation Grade: Automatic, Fully Automatic