Teflon Coatings Dealers in Andheri, Mumbai

• Usage: Appliance Paint
• Main Raw Material: Other

PTFE Coating materials have the highest operating temperature of any Fluoropolymer and have extremely low coefficient of friction coupled with good abrasion and chemical resistance. PTFE Coatings are either single or two-coat systems, comprising of a primer and topcoat and for premium systems three coat systems are available. PTFE coatings are available in aqueous based forms. PTFE coatings can provide the solution to many engineering questions particularly those relating to non-stick (release), low friction, chemical resistance and wear resistance, there are many other solutions that can be resolved by the application of PTFE coatings Properties: Non-stick, Non-wetting, Anti-static, self-lubricating, heat-resistant properties Thickness from 25 microns to 50 microns Very low adhesion to most materials, excellent water repellent, Low-coefficient of friction, chemical inertness, and unusual thermal stability. Temperature resistance -100oC to +260oC. Not attacked by corrosive chemical or strong solvent   NON-STICK Very few solid substances will permanently adhere to TEFCOTTM coating and while tacky materials may show some adhesion, almost all substances release easily. NON-WETTING TEFCOTTM surface are both oleo phobic and hydrophobic, they are not readily wet, clean-up is easier, more through and in many cases self-cleaning. HEAT-RESISTANCE There is no decomposition of TEFCOTTM below 250o C, insignificant decomposition between 250o and 300o which requires no special precautions LOW COEFFICIENT OF FRICTION The coefficient of friction of TEFCOTTM is generally in the range of 0.05 to 0.20, depending on the load sliding speed. CRYOGENIC STABILITY TEFCOTTM will withstand severe temperature extremes without loss of physical properties UNIQUE ELECTRICAL PROPERTIES Over a wide range of frequencies, TEFCOTTM has high dielectric strength, a low dissipation factor, and very high surface receptivity. CHEMICAL RESISTANCE TEFCOTTM is normally unaffected by chemical environments. The only chemicals known to affect all are the alkali metals and highly reactive fluorinating agents.

• Thickness: 800 to 1000 microns

Our products and services resist corrosion, abrasion, and wear, while maintaining nonstick and high purity characteristics of equipment used in the chemical, microelectronic, oil and gas, and pharmaceutical processing industries. BLIONTM-A pinhole free homogenous thick coating of PVDF (KYNAR), FEP, PFA, ETFE ( TEFZEL® ) ECTFE (HALAR®).

Teflon Coating, Aerator, stainless steel filter disc, teflon lining

It is a Co-Polymer of tetrafluoro ethylene (TFE) with a perfluoroalkoxy monomer (PFA). PFA has better mechanical properties than PTFE or FEP. Chemical resistance is excellent similar to PTFE. It is used in the Semiconductor and pharmaceutical applications due to the excellent chemical resistance, high purity, and FDA compliance. This coating is most expensive because of high cost of material & high Temperature processing.

pfa coating, rotary vacuum cone dryers, halar coating, etfe coating

Teflon Coating, Polyurethane Floor Coating, Wood Coating Service

PTFE Coating, xylan coating, Ptfe Coated Fasteners

car teflon coating, industrial teflon coating