Telecommunication Equipments Dealers in Andheri, Mumbai

• Cable Type: PVC & LSZH on request 0.9mm/2.0mm/3.0mm Simplex & duplex
• Working Temperature: -40℃

D-Link patch cords are available with full standard optical specifications, precise length tolerances. All assemblies are 100% inspected for optical characteristics and fiber end face finish. The optical fiber patch cords are suitable for data communication, telecommunication applications. The terminated connectors in assemblies are designed to and are compatible with industry standards (EIATIA, IEC, ANSI, NTT and Telcordia). D-Link can deliver customized patch cords as per requirement .

The DVI ELR Extender over one CAT5 allows the extension of a DVI source to a display, up to 495 feet (150 meters), using a single CAT-5e cable. This product is capable of HDCP and HPD pass-through. It can also be configured by the installer via DIP switches for maximum range or maximum bandwidth, and for low power consumption (auto sleep mode) or always-on operation. The DVI Extender over one CAT5 uses Gefen’s ELR implementation of HDBaseT® technology, allowing the DVI signal to travel along a single CAT-5e or better cable, reducing cable costs and facilitating installation.

• Brand Name: Apar
• Armoured: Yes
• Core: 4
• Overall diameter: 12 m

We are the leading supplier of this products.

• Features: Durable nature , Easy to use , Low maintenance, Nominal costs, Longer service life .

• Material: Plastic, PVC, Rubber
• Certification: CE Certified
• Application: Telephone Use
• Color: Black, Grey, Red, White
• Voltage: 110V, 220V
• Feature: Crack Free, Durable, High Ductility, High Tensile Strength, Quality Assured

•   Particulars  : Specifications
• Product Range: 5 mm to 16 mm OD
• Operating Line Speed: max 50 MPM
• Main Extruder: 45 mm, 30:1, B6
• Aux Extruder: 35 mm, 26:1
• Jokey Extruder: 25 mm, 24:1
• Screen Changer: Manual Lever Type VM50-MD
• Die Head: CoexLabyfil 20/450L  
• Vacuum Tank: IVB 25-9M-SS
• Cooling Bath +Drain Bath +Dryer Bath: 3 x 4 M + 2.5 M + 1.5 M
• Air Dryer: Air Dryer V4
• Caterpillar Capstan: CC32
• Spool Winder: Microwind 800
• Automation Panel: NX 32

• Diameter: 4-10 mm
• Usage/Application: Commercial
• Core: 4, 6, 8, 12, 24
• Armoured: No
• Temperature: -40
• Mode Type: Single Mode
• Micron: 50 - 62.5 Micron

Wish to buy original Telecom Patch Cords at market leading prices? We are your answer. Our company is one of the eminent Exporters & Suppliers a wide range of Telecom Patch Cords in India. Procured directly from leading authorized dealers, the Telecom Patch Cords we are offering are reliable, come with warranty and accessories.

• Type: Heating Cables
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm, 3.5-4mm, 4.5-5mm
• Color: Black, Green, Red, White, Yellow
• Voltage: 220V, 440V
• Application: Home, Industrial
• Power: 1-3kw, 3-6kw, 6-9kw
• Feature: Crack Free, Durable, Heat Resistant, High Ductility, High Tensile Strength, Quality Assured
• Inner Material: Aluminium, Coper, GI
• Outer Material: Neoprene Rubber, Rubber

• Features: Connects Recorder to DSLR or Camcorder, Works with Rode Wireless GO Receivers
• Coiled Cable Size: 6.7 to 15.7
• Dimensions: 30.00mmH x 10.00mmW x 170.00mmD
• Weight: 20.00g
• Warranty: 1-year manufacturer's warranty

• Color: White
• Application: Office
• Type: Analog
• Minimum Order Quantity: 1 Piece

• Brand Name: D-Link
• Patch Panel: Cat 6
• Shielding: UTP
• No. of Pairs: 4 Pair
• Wire Length: 305m
• Cable Type: Solid

This cable is used for inter-connection for the transmission and data processing of electronic equipment.

• Features: High return loss, Low insertion loss, Telcordia style boots, TIA/EIA 568-A compliant
• Applications: CATV, metro, LAN, Gig bit applications (ATM & Ethernet), Telecommunication networks.

Apar's Uniflex Cables Division is a leading manufacturer of Electrical & Telecommunication cables in India and has been serving its customers since the year 1981 with its wide range of cables. The cable division has two plants located at Umbergaon and at Khatalwada, both in Gujarat State of India, approximately 150 kms from Mumbai and is well equipped with advanced manufacturing and testing facilities. The Company has set up an Electron Beam Irradiation facility at Khatalwada with two Electron Beam accelerators of 1.50 MeV and 3.0 MeV with suitable under-beam handling systems for a wide range of cables and other products like Heat Shrink Tubes and components, PE Pipes, Sterlization of Medical products, Gems and Diamonds, Laminated tubes, HDPE pipes up to 200mm, Reprocessing of PTFE, Packaging and Foam PE sheets etc.

• Power Source: 12Volt 5 Amp
• Brand: CP PLUS,Hikvision,Panasonic,Dahua
• Body Material: Plastic,Matel
• Frequency: 5sec
• Material: Pack
• Voltage: 12 Volt

• Certification: CE Certified
• Application: Connectivity
• Weight: 10-100gm, 100-200gm, 200-300gm, 300-400gm, 400-500gm
• Condition: New, Used
• Operating Temperature: 10-25 Deg.C, 25-50 Deg.C
• Frequency: 50Hz, 60Hz
• Power: 0-6VDC, 12-18VDC, 6-12VDC
• Driven Type: Battery, Electric
• Warranty: 1yr, 2yrs, 5yrs

We are the main supplier of this product.

A prominent supplier of huge range of Cat 5e Cable.

Optic Fiber Patch Cord, cable wires, optic fiber connector

Fiber Optical Patch cords are used for communication between 2 devices.Patch cords are available in different color to identify fiber media.

The detector switching system uses a switching element at the column outlet to direct eluites into multiple detectors. In contrast to a detector splitting system which involves loss of sensitivity for each detector, this flow path switching system directs the entire eluted component from the column to the appropriate detector, resulting in application of 100% of the mass of each component to the most sensitive detector. For example, when analyzing a mixture of inorganic gases and trace hydrocarbons, even if the sample can be separated in a single column, it is difficult for a thermal conductivity detector (TCD) to detect the inorganic gases and trace hydrocarbons simultaneously. It is necessary, therefore, to perform the analysis twice, using a TCD and flame ionization detector (FID). In such a case, a switching element can be used to send the hydrocarbons to the FID detector and the inorganic gases to the TCD detector. There is no loss of detector sensitivity, as the full sample volume reaches each detector. It can direct only the target components separated in the column into the selective detector, while venting solvents and impurity components that are not required by the detector. This achieves high sensitivity while avoiding contamination of the selective detector. This system uses the MDGCGCMS-2010 Series switching element that offers unparalleled separation capacity.

optical fibre, aluminium metal, strip brass, strip aluminium, Metal Wire

computer networking cables, Message Alert Devices, call boxes

Intercom Set, Lcd Display, sensor, Alarm Box, Pencil Read, Read Switch Box

Generally manufactured with Solid Bare Copper conductor of 0.4, 0.5, 0.6 0.71 & 0.9mm

EPABX System, Biometric Access Control Systems, Networking Switches

wireless video intercom system, Personal Body Scanner, X-ray Inspection System

Fiber Optic

banners, pamphlets, Magazines, Flyers, Desktop Calendar

Pair Cables