Temperature Controller Dealers in Kurla, Mumbai

• Condition: New
• Brand Name: Yudo
• Voltage: 100 to 240 V AC
• Heat Resistance: 100 Degree C
• High Precise Measurement: +- 0.01 Degree C
• Precise Temperature Control: +- 0.018 Degree F
• Tolerance: +- 0.01 Degree C
• Model No.: CW662
• Temperature Range: 0
• Frequency: 50/60 Hz

• Type: Thermocouple Sensors
• Material: Plastic, Stainless Steel
• Application: Industrial
• Color: Black, Blue, Red, White
• Feature: Durable, Fine Finished, Good Quality, Light Weight, Rust Proof, Rust Resistance
• Condition: Good, New
• Power: 15w, 20w
• Warranty: 1year, 2years
• Condition: New, Used
• Alarm Range: 1.5mtr, 1mtr, 2.5mtr, 2mtr

• Application: Green Room
• Voltage: 230 VAC
• Frequency: 50 Hz
• Phase: Single/Three Phase
• Degree Of Protection: IP22
• Temperature Range: 20 to 80 Degree Celsius
• RH: 10-95%, Non-condensing

High quality standards in production and storage necessitate a comprehensive monitoring system that delivers measured data reliably. The adaptive RMS Rotronic Monitoring System is the perfect solution for a wide range of applications.

TEMP TECH manufacturers Resistance Temperature Detectors (RTD’s) confirming to all international Standards like IEC 751 , GOST, BS-1904, DIN 43760, JIS C1604, 1606 etc…. All types of configurations are available and most of the RTD’s are custom made. Accuracy in measurement of Temperature, faster response, sturdiness, ease in maintenance and replacement are the main criteria of design. All RTD’s are calibrated in our Te

TEMP TECH manufacturers Resistance Temperature Detectors (RTD’s) confirming to all international Standards like IEC 751 , GOST, BS-1904, DIN 43760, JIS C1604, 1606 etc…. All types of configurations are available and most of the RTD’s are custom made. Accuracy in measurement of Temperature, faster response, sturdiness, ease in maintenance and replacement are the main criteria of design.

Standalone, Lube Fuel Oil Oil Contamination Deterioration Monitor has no moving parts , temperature compensated , one touch calibration, with two level alarm set points , Low Flow detection and Metallic dust (bearing metalmill scale etc) detection . Extremely easy & simple installation. Prevent Major breakdowns . Can be used with Diesel Engines, Turbines, Hydraulic Cranes, Separators Transformers etc. Contact us for a complete engineered solution.

• Temperature Range: 0 - 300 degree.
• Input supply: 150-270 VAC.
• Details of out put relay: SPDT, Goodsky RWH-SH-112D, Load 1Amp/240VAC.
• Size of the enclosure: 96x96x85, Cut out of panel 92x92.
• Display: 6 digits, size 1/2 x 3/4 inch and 7 segment with red color.
• Temperature sensing probe: PT 100
• Resolution: 1 degree
• Status indication: LED for relay status
• Sensor break protection: Auto switch off on sensor break, "OPEN / SHORT" will be

The TC-10 is an ON /OFF temperature controller with dual display and digital calibration. This instrument has been designed with the latest integrated chip technology which could help to minimize the components of the instruments. So the breakdown rate of the instruments due to component failure has been reduced to zero. The calibration and linearity of the temperature is controlled through software and so the mechanical preset for the temperature calibration has been eliminated. There is no need to calibrate every year as it is guaranteed for at least five years. The calibration cannot be altered by anyone on the site as it is password-protected.

Features: Auto or Manual Function PID Auto Temperature Control Soft Start up - 94 deg Celcius Heater on Indicator Selectable two thermocouple types (J/K) Thermocouple Break Msg TC Open / op% Specifications: Dimension : W-50 H-176 D-192MM Power Input : 15AMP 230VAC =/- 15% Power Frequency : 50 / 60 Hz PV Temperature : +/- 2 deg Celcius

Resistance Temperature Detectors (RTD’s) are temperature sensing devices consisting of a wire coil or deposited film of pure metal, usually platinum. The element’s resistance increases with temperature in a known and repeatable manner. RTD’s exhibit excellent accuracy over a wide temperature range. Non standard size can be manufactured on request.

Control Technology for Hot Runner Systems: Safe and Comfortable 1, 2, 3, 5-channel temperature controllers DP1, DP2The compact controllers for economical and comfortable control of small hot runner systems. Total connected value 1-phase 230 V 16 A Fuzzy PID control behaviour Set / actual display for each control point Gentle softstart function Pulse group control Power limitation Temperature reduction during production breaks Regulated operation in case of failed thermal probe possible Counter for hours of operation Continual error monitoring   Multi-channel temperature controllers DPT5, DPT10, DPT15, DPT20, DPT45The multiple controllers of the DPT series offer extensive functions for the safe control of complex hot runner systems. Four selectable temperature programs Fuzzy PID control behaviour Gentle softstart function Control-TechnologySet/actual display for each control point Limited power during start-up Start-up ramp for even heating of different heating circuits Phase control and pulse group control Temperature reduction during production breaks possible Regulated operation in case of failed thermal probe possible Diagnostic function for detection of wiring errors Up to 3500 W per control zone Counter for hours of operation Continual error monitoring Connectors of thermocouples and heating elements physically separated Retrofitting of up to 15 control zones is feasible Optional with serial interface for connection of injection moulding machines by ARBURG, ENGEL, KRAUSS-MAFFEI, FEROMATIK, etc.   Multi-channel temperature control cabinet DPT multi zone for operation with multiple tools with a high number of cavities. This new development especially for the operation of multiple tools with a high number of cavities offer a comprehensive range of functions: Expandable from 40 up to 150 control circuits (in steps of 5), the LCD touch-screen display guarantees the simplest operation for highly complex tools. The control is executed by means of a Windows software. Graphic tool display with freely moveable display fields. Full-text error messages. Log files for monitoring errors and status. Possibility of managing two tools separately. Print function for temperature records. Various remote maintenance possibilities via standard PC interfaces.     Controller eValve-4The controller "eValve-4" is able to control up to four bistable electromagnets, which are used for nozzles with needle valve. The electrical lift magnets generate a mechanical lift of 10 mm. The two end position are fixed with permanent magnets. Electric power is only used for changing the position of the magnetic fixed lifting cylinder.

TEMPERATURE, bank bead, electrical sensors, Electronic Components

Offers temperature indicator.

Digital Temperature Indicator, Digital Thermometer

temperature control instruments, Activation Powder, Reactivation Powder

RTD Sensor, Fire Detectors, Heating Elements, Thermostats

repairing sensors, maintenance sensors, controllers, Temperature Control

digital frying thermometer, Filter Accessories, Oil Filters

Temperature Controllers, data sensors, force sensors

Temperature Indicator, Temperature Sensors

Cooling Controller, Multifunction Meter, Electrical Panel, MCCB Switches

digital frying thermometer, Filter Accessories, fry powder, Oil Filters