Temperature Controller Dealers in Mulund, Mumbai

• Application: Green Room
• Voltage: 230 VAC
• Frequency: 50 Hz
• Phase: Single/Three Phase
• Degree Of Protection: IP22
• Temperature Range: 20 to 80 Degree Celsius
• RH: 10-95%, Non-condensing

• Material: Metal
• Voltage: 380V, 440V
• Condition: New
• Application: Industrial
• Automatic Grade: Automatic
• Feature: Digital Water Meter Display, Lorawan Compatible, Spiral Water Meter
• Warranty: 2 Years

We have carved repute as a prominent Manufacturer & Supplier of Temperature & Humidity Controllers in Maharashtra, India. We are supported by a group of personnel who make use of the finest material for their production and compiled them in line with industry standards. Owing to our smart network, timely delivery of the placed order is what we always execute. Our Temperature & Humidity Controllers are obtainable at the modest prices!

• Material: Stainless Steel
• Country of Origin: Made in India
• Voltage: 220 V
• Usage/Application: Industrial
• Brand: Mettechnik
• Dimension: 100 mm - 2000 mm
• Temperature Range: -200 to 1350 Degree

• Temperature Range: 0-300 degree.
• Input supply: 150-270 VAC.
• Details of output relay: SPDT, Goodsky RWH-SH-112D, Contact rating 10A/270VAC, Maximum load 250mA
• Size of the enclosure: 96x96x85, Cut out of panel 92x92..
• Display: 3 digits, size 1/2 x 3/4 inch and 7 segment with red color.
• Temperature sensing probe: PT 100
• Resolution: 1 degree
• Status indication: LED for relay status.
• Sensor break protection: Auto switch off on sensor break,"OPEN / SHORT" will be displayed.

This is a dual set point temperature controller with two output relays and a single PT100 input. Each set point controls its own output relay.It can be configured as a high / low limit, heating / cooling, two stage heating (or cooling) controller or as a heating or cooling controller with alarm. The main advantage of this controller is the calibration which has been done digitally through software. So there is no need to do the calibration every year and the setting cannot be altered as it is protected with a password. Digital display, microprocessor based design, electrical noise-resistance even in a rough industrial environment and user friendly key operations are the main features of this instrument. How to set the temperature The temperature can be set by pressing the  key which will show TP1 on the main display. Press the  key which will show the current set temperature of TP1 and change the parameter through  /  key. Press  key again to save the parameter of TP1 and then TP2 will appear on the main display. The parameter of TP2 can be set by following the instruction as of TP1. After setting TP1 and TP2 the temperature controller can be restarted by using the  key.

TEMP TECH manufacturers Resistance Temperature Detectors (RTD’s) confirming to all international Standards like IEC 751 , GOST, BS-1904, DIN 43760, JIS C1604, 1606 etc…. All types of configurations are available and most of the RTD’s are custom made. Accuracy in measurement of Temperature, faster response, sturdiness, ease in maintenance and replacement are the main criteria of design.

TEMP TECH manufacturers Resistance Temperature Detectors (RTD’s) confirming to all international Standards like IEC 751 , GOST, BS-1904, DIN 43760, JIS C1604, 1606 etc…. All types of configurations are available and most of the RTD’s are custom made. Accuracy in measurement of Temperature, faster response, sturdiness, ease in maintenance and replacement are the main criteria of design. All RTD’s are calibrated in our Te

Standalone, Lube Fuel Oil Oil Contamination Deterioration Monitor has no moving parts , temperature compensated , one touch calibration, with two level alarm set points , Low Flow detection and Metallic dust (bearing metalmill scale etc) detection . Extremely easy & simple installation. Prevent Major breakdowns . Can be used with Diesel Engines, Turbines, Hydraulic Cranes, Separators Transformers etc. Contact us for a complete engineered solution.

High quality standards in production and storage necessitate a comprehensive monitoring system that delivers measured data reliably. The adaptive RMS Rotronic Monitoring System is the perfect solution for a wide range of applications.

Head:Cast aluminium / Stainless steel   Assembly :3 - Wire Simplex / 6-wire duplex   Temp.range:- 200° to 449°   Immersion length:300 MM/in multiple of 100 MM   Sheath Dia.:6 MM and MOC : SS 316

Thermocouple consists of two wires of dissimilar metals welded together into a junction. At the other end of the signal wires, usually as part of the input instrument, is another junction called the reference junction. Heating the sensing junction generates a thermoelectric potential (emf) proportional to the temperature difference between the two junctions. This millivolt-level emf, when compensated for the known temperature of the reference junction,

Salient Features: - High Stability and Reliability - Special Controller for Cooling with time delay - Trip Controller for safety with manual acknowledge - Sensor failed Protection .

Control Technology for Hot Runner Systems: Safe and Comfortable 1, 2, 3, 5-channel temperature controllers DP1, DP2The compact controllers for economical and comfortable control of small hot runner systems. Total connected value 1-phase 230 V 16 A Fuzzy PID control behaviour Set / actual display for each control point Gentle softstart function Pulse group control Power limitation Temperature reduction during production breaks Regulated operation in case of failed thermal probe possible Counter for hours of operation Continual error monitoring   Multi-channel temperature controllers DPT5, DPT10, DPT15, DPT20, DPT45The multiple controllers of the DPT series offer extensive functions for the safe control of complex hot runner systems. Four selectable temperature programs Fuzzy PID control behaviour Gentle softstart function Control-TechnologySet/actual display for each control point Limited power during start-up Start-up ramp for even heating of different heating circuits Phase control and pulse group control Temperature reduction during production breaks possible Regulated operation in case of failed thermal probe possible Diagnostic function for detection of wiring errors Up to 3500 W per control zone Counter for hours of operation Continual error monitoring Connectors of thermocouples and heating elements physically separated Retrofitting of up to 15 control zones is feasible Optional with serial interface for connection of injection moulding machines by ARBURG, ENGEL, KRAUSS-MAFFEI, FEROMATIK, etc.   Multi-channel temperature control cabinet DPT multi zone for operation with multiple tools with a high number of cavities. This new development especially for the operation of multiple tools with a high number of cavities offer a comprehensive range of functions: Expandable from 40 up to 150 control circuits (in steps of 5), the LCD touch-screen display guarantees the simplest operation for highly complex tools. The control is executed by means of a Windows software. Graphic tool display with freely moveable display fields. Full-text error messages. Log files for monitoring errors and status. Possibility of managing two tools separately. Print function for temperature records. Various remote maintenance possibilities via standard PC interfaces.     Controller eValve-4The controller "eValve-4" is able to control up to four bistable electromagnets, which are used for nozzles with needle valve. The electrical lift magnets generate a mechanical lift of 10 mm. The two end position are fixed with permanent magnets. Electric power is only used for changing the position of the magnetic fixed lifting cylinder.

Sophisticated digital to simple non-indicating controls. Combination controls up to 150 amp capacity. 

• Type: Thermocouple Sensors
• Material: Plastic, Stainless Steel
• Application: Industrial
• Color: Black, Blue, Red, White
• Feature: Durable, Fine Finished, Good Quality, Light Weight, Rust Proof, Rust Resistance
• Condition: Good, New
• Power: 15w, 20w
• Warranty: 1year, 2years
• Condition: New, Used
• Alarm Range: 1.5mtr, 1mtr, 2.5mtr, 2mtr

New Concepts & Systems offers a full range of proportional Temperatures Controllers and Indicators in Analogue and Digital versions for precise measurement and control of temperature for chemical, petrochemical or any process industries. The Controllers or Indicators are available in different types of enclosures like DIN standard or compact portable types for mounting on any control panels.

data sensors, force sensors, industrial automation products

Offers temperature indicator.

repairing sensors, maintenance sensors, controllers, Temperature Control

temperature control instruments, Reactivation Powder, Anti Air Powder

J Type Thermocouples, Extension Thermocouple Cable, Compensating Cable J, k

Thermostats, precise thermostats fire detectors, heating element thermocouple

Cooling Controller, Multifunction Meter, Solid State Relays

Electronic Instrument, oil process controller

Flanges, Pipes, Strainers, nut fasteners, Pressure Switches