Temperature Controller Dealers in Pathan Wadi, Mumbai

We are one of the leading manufacturer and supplier of superior quality rtd temperature sensors. These rtd temperature sensors are good demand in the market due to high quality and durability.

• Principle: Input suitably signal conditioned, amplified, linearised as required and displayed.
• Inputs: J, K,R,S,T and other thermocouples, R.T.D.’s like Pt-50,Pt-100 (2,3 wire), 4-20mA, 0-1 VDC ......etc....
• Range, Accuracy Resolution: Refer Table - A
• Cold Junction  Compensation: Automatic

We offer ingle element stator winding rtds. Flat, laminated “stick” rtds fit in slots between stator windings to monitor temperature rise and prevent overheating. The national electrical manufacturers association (nema) recognizes embedded detectors as a standard protection for motor and generator insulation. unlike on-off devices, rtds provide continuous sensing for earlier warning without unnecessary tripouts. The sensing elements of stator rtds extend through most of the body length to provide an average temperature reading. This eliminates the danger of a point-type sensor missing a localized hot spot. Six sensors are recommended for each motor, two per phase. Locate sensors near the hottest point of the windings for best performance. Manstronics® stator rtds meet the specifications of ansi c50.10-1990, general requirements for synchronous motors.

Mould Temperature Controller, provided by us, has advanced microprocessor controller that displays operation and fault status. With this, accurate digital readout of process temperature against set point is also available in our Mould Temperature Controller. Our Mould Temperature Controller is easy to service and maintain. We provide Mould Temperature Controller at market leading rates.   Highlights Side panels easily openable Tubular cooling coil Stainless steel heater Reliable and high performance pump Moveable parts in contact with the medium (water) Made of stainless steel Totally safe Dual safety heaters Can handle processing temperature up to 150oC in oil version and up to 90oC in water version Easy to move Mounted on wheels

Our team of dedicated professional offer J Type Thermocouples to the esteemed customers. They are used in various applications & are highly appreciated for their premium quality & long service life. These thermocouples are easy to use & are precisely manufactured using best quality raw material that is sourced from verified & trusted dealers. Further, they are customizable and are being offered in the normal rates.

• Type: Automatic
• Voltage: 220V
• Frequency: 50Hz
• Driven Type: Electric
• Temperature Range: 0-100°C
• Accuracy: 100%
• Certificate: CE Certified
• Current Type: AC, DC
• Warranty: 1 Year
• MOQ: As per Client Requirement

Six point selection switch is available to select the channels. The selector switch is heavy duty & zero contact resistance. Highly accurate & reliable Glass Epoxy single board design Thermocouples, RTD's & other inputs Wide temperature range

1] Analog Temperature Controller (48 x 48) 2] Digital Temperature Controller (48 x 48, 72 x 72, 96 x 96) Digital Timer PID Temp. Controller Process Indicator Counter Programmable Logic Controllers Accessories

• Description: PHV - Pilot diaphragm sanitary Back Pressure Regulating Valve  PRV - Pilot diaphragm sanitary downstream Pressure Reducing Valve
• Size / End Conn.: PHV - DN 15 to DN 80 / Butt weld end and Triclover end  PRV - DN 15 to DN 40 / Butt weld end and Triclover end
• MOC: STD - ANSI SS 316L
• Diaphragm: STD - EPDM Optional - PTFE, Silicon, Viton on request will be available.
• Medium: Purified Water, Steam
• Pressure: Inlet Press. - 5 - 6 Bar, Set Pressure Range - 20 Millibar to 2.5 Bar
• Temp.: STD - 80°C Optional - 110°C

• Display: 3.5 Digits Red LED
• Accuracy: 0.3% + 2 digits.
• Dimensions: 96 X 96 mm or 96 x 192 mm
• Channel: 4, 6, 8 or 12 channels
• Range: -100ºC to 200ºC, -50ºC to 600ºC
• Resolution: 0.1°C or 1ºC
• Sensor: PT 100 or Thermocouple (K-Type)
• Power: 230 V. AC + 15%

INTRODUCTION  Normally any process industry requires measurement, monitoring and control of various process parameters such as temperatures, pressure, flow etc. DIGITAL TEMPERATURE INDICATORS These are resistance temperature detectors with PT100 sensor. The display is digital LED display with 31/2 digit output and resolution of 0.1 o C. There are available with total range 0-999.9 o C. Flame proof and none two point controllers are also available. One point and two point controllers are also available for annunciation or for on/off controls.

Resistance Temperature Detectors are the most accurate, stable & sensitive thermometers available today and under the latest International Temperature Scale - 90, protocol (ITS - 90), They are the recommended as standard for comparison checking of all other types of thermometers, functioning between the range - 260°C. to + 960° C. Resistance Thermometer Assemblies are manufactured by FABRIKA from Platinum bulbs with a nominal resistance value of 100 Ohms at 0° C or in some special cases with 50 Ohms windings. Elements with 200 Ohms , 500 Ohms or 1000 Ohms windings are also offered for special high sensitivity applications.

• Temperature Range: 200 oC to 650 oC

• Brand Name: DIXELL
• Display Type: Digital
• Model: XR02CX

Micro-processor base 4 channel PID Controller with universal input (Same input type for all PID) with 4 individual display & individual PID parameter setting with 4 control relay output & 4 soft alarm display universal power supply & compact 96 x 96 x 110mm design, available with RS 485 or direct 18 coloum printer interface as option.

• Feature: Innovative design, High performance, Longer service life .
• Type: Digital
• Size: 96*48 mm
• Model Number: Di / 08

OPERATION INSTRUCTIONS Using Method: Temperature & Pressure relief valves is suitable for bearing the pressing type solar water heater, gas heater, electrical heater, water heater of fuel, water heater of heat pump, sensitive function heater, etc. Various kinds of heaters (such as the boilers) and hot water containers, can lower the temperature and reduce pressure automatically, have temperature and pressure double safe protection function. TECHNICAL PARAMETER Standard Setting: 75, 87,100, 125,150psi (0.517, 0.6, 0.69, 0.86, 1.034MPa) Temperature Relief: 210°F (99°C) Dimensions / Weight   Can also confirm that exactly makes the pressure & exactly make temperature according to the needs of user's contract for future delivery. INSTALLATIONTemperature and Pressure Relief Valves should be installed on the water heater top or side. The temperature sensing element must be immersed in the water within the top 6" of the tank. The eliminating pipeline should be installed under the relief valve. Its terminal station distance in floor drain should be greater than 6" to make it easily remove & observe water.   SAFEGUARD & MAINTENANCE After installing, water heater users must lift the relief valve handle once at least every year, so as to ensure that unblocked things in the waterway of the relief valve. Before operating handles, please check the elimination pipeline which joining the relief valve guaranteed that the hot water from relief valve discharge the proper place, otherwise it may cause the bodily injure. If the handle is lifted, without water flowing out, it proves that the relief valve is invalid. Then it should turn off the water heater and ask pipeline personnel check and repair

We are a widely acclaimed Manufacturer, Supplier and Exporter of Temperature Indicators based in Mumbai, Maharashtra. Manufactured in compliance with set industrial norms, our Temperature Indicators are precisely designed and show a highly accurate result. Our huge logistic network ensures that small or bulk orders of the product are delivered to the buyer well within the stipulated time.

•  : Specification:
•  :  

  Flat, laminated “stick” RTDs fit in slots between stator windings to monitor temperature rise and prevent overheating. The National Electrical Manufacturers Association (NEMA) recognizes embedded detectors as a standard protection for motor and generator insulation. Unlike on-off devices, RTDs provide continuous sensing for earlier warning without unnecessary tripouts. The sensing elements of stator RTDs extend through most of the body length to provide an average temperature reading. This eliminates the danger of a point-type sensor missing a localized hot spot. Six sensors are recommended for each motor, two per phase. Locate sensors near the hottest point of the windings for best performance.. This RTD are generally flat type in construction and are available in various sizes. Thermo  stator RTDs meet the specifications of ANSI C50.10-1990, general requirements for synchronous motors.             Slim dimensions to get inserted in between windings   Bifiliar design that prevents induction voltage resulting in measurement errors   Resistance to shock, vibration and pressure   Withstand of Vaccum Pressure Impregnation Process   Dielectric Strength   Single and dual element RTDs      

• Temperature Range: 0 to 750 deg C
• Application: Industrial
• Accuracy: +/- 2.5 deg C or +/- 0.75%)
• Class: Class 2
• Probe Material: Stainless Steel
• Assembly: Thermocouple Probe
• Mount: Bayonet
• Probe Termination: Lead Wire
• Probe Diameter: 0.5 - 8 mm
• Probe Length: 0 - 150 mm
• Features: High stability, Superior performance, User-friendly device

• Display: 3.5 Digits Red LED
• Accuracy: 0.3% 
• Dimensions: 96 X 96 mm or 96 x 192 mm
• Channel: 4, 6, 8 or 12 channels. Selection by rotary switch or automatic with scan rate adjustment.
• Range: -100ºC to 200ºC, -50ºC to 600ºC
• Resolution: 0.1°C or 1ºC
• Sensor: PT 100 or Thermocouple (K-Type)
• Power: 230 V. AC 

Indian make Hot runner Temperature controllers

• Temperature Range: -200 to 600 deg C
• Application: Industrial
• Termination Type: Terminal Head Assembly
• Probe Material: Stainless Steel
• Probe Diameter: 8 - 20 mm
• Sensor Connection Wiring: 2 Wire
• Cable Length: 2 m
• Probe Length: 150 - 300 mm

We have a team of efficient personnel who sternly check the raw materials before final procurement. Thus, we ensure a qualitative array of products at customer's end. We are acknowledged for providing safe transaction modes for the payments which include online as well as offline method. Thus, we accept cash payments along with bank transfers. Resistance Temperature Detector has a sturdy body with high precision and a long service life.         

• Size: 48 x 96 mm
• Features: Universal measuring input.,Binary input control.,Soft-start function,8 types of alarms.,Alarm latch function.
• Brand: Rishabh Instruments
• Model No.: RE82
• Control Type: PID/On-Off
• Input Type: Thermocouple
• Control output Type: Relay

• SENSOR: J (Fe/K) -99 TO 750'C
• DISPLAY: 7 SEGMENT LED; 4 DIGITS
• CONTROL ACTION: PID Auto tune action

Features:   Wide red and green numerical tubes Display PV and SV simulate easily   Sensing signal appointed input   Automatic transducer adjusting.   Function of second class data lock protection.   Accuracy:     (1)1'C, FSI character (2)0.25%FS1 character   Alarming range: Free design of the full range   Operation range:     (1) Switching power: 85-270 VAC, 50/60 Hz. (2) Transformer supplying: AC230V±20%, 50/60 Hz.

• Voltage: 250 VAC
• Brand: Delta
• Model No.: DTB4824CR
• Size: 48 x 24 mm
• Control Type: PID/On-Off
• Input Type: Current (mA), RTD, Thermocouple, Voltage (mV)
• Control output Type: Analog (mA/mV), Relay
• Frequency: 50/60 Hz

Temperature Scanner, Power Saver, Stepper Motor Controller, Data Logger

Resistance Temperature Detectors, Thermocouples, rtds, Thermowells