Temperature Sensors Dealers in Marine Drive, Mumbai

110S Temperature Sensor The 110S Temperature Sensor is a durable and economical integrated circuit temperature sensor that provides a high level voltage output signal.   The 110S is ideally suited for the temperature measurement requirements of remote wind and solar energy studies. Recommended uses of the data from this sensor include calculating energy density calculations; monitoring air temperature; calculating atmospheric stability conditions; identifying icing conditions in cold climates; and estimating PV panel efficiency, which is temperature dependent. A calibrated version, the 110SC, is available when the lowest uncertainty is the priority. It is suggested for differential temperature measurements, where two temperature sensors are deployed on the same tower. This sensor includes an internal reference, amplifiers, and linearization enclosed in a six-plate UV-stabilized radiation shield. The universal mounting assembly connects quickly to any pipe or tower. The sensor comes with a potted 5 m, 67 m or 90 m sensor cable. If you require a different cable length, please contact us.   Specifications  110S Temperature Sensor | 5m Cable (#1906)110S Temperature Sensor | 67m Cable (#6610)110S Temperature Sensor | 90m Cable (#9036)110SC Temperature Sensor | 5m Cable (#4429)110SC Temperature Sensor | 67m Cable (#9035)110SC Temperature Sensor | 90m Cable (#9037) Description Sensor type Integrated circuit temperature sensor with six plate radiation shield Integrated circuit temperature sensor with six plate radiation shield Integrated circuit temperature sensor with six plate radiation shield Integrated circuit temperature sensor with six plate radiation shield Integrated circuit temperature sensor with six plate radiation shield Integrated circuit temperature sensor with six plate radiation shield Applications Wind resource assessment Meteorological studies Environmental monitoring Wind resource assessment Meteorological studies Environmental monitoring Wind resource assessment Meteorological studies Environmental monitoring Wind resource assessment Meteorological studies Environmental monitoring Wind resource assessment Meteorological studies Environmental monitoring Wind resource assessment Meteorological studies Environmental monitoring Sensor range -40 °C to 52.5 °C (-40 °F to 126.5 °F) -40 °C to 52.5 °C (-40 °F to 126.5 °F) -40 °C to 52.5 °C (-40 °F to 126.5 °F) -40 °C to 52.5 °C (-40 °F to 126.5 °F) -40 °C to 52.5 °C (-40 °F to 126.5 °F) -40 °C to 52.5 °C (-40 °F to 126.5 °F) Instrument compatibility All RNRG loggers All RNRG loggers All RNRG loggers All RNRG loggers All RNRG loggers All RNRG loggers Output signal Signal type Linear analog voltage Linear analog voltage Linear analog voltage Linear analog voltage Linear analog voltage Linear analog voltage Transfer function Temp = (Voltage x 55.55) - 86.38 °C [Temp = (Voltage x 100) - 123.5 °F] Temp = (Voltage x 55.55) - 86.38 °C [Temp = (Voltage x 100) - 123.5 °F] Temp = (Voltage x 55.55) - 86.38 °C [Temp = (Voltage x 100) - 123.5 °F] Temp = (Voltage x 55.55) - 86.38 °C [Temp = (Voltage x 100) - 123.5 °F] Temp = (Voltage x 55.55) - 86.38 °C [Temp = (Voltage x 100) - 123.5 °F] Temp = (Voltage x 55.55) - 86.38 °C [Temp = (Voltage x 100) - 123.5 °F] Accuracy Uncertainty (k=2): ±1.24°C (±2.23°F) Uncertainty (k=2): ±1.24°C (±2.23°F) Uncertainty (k=2): ±1.24°C (±2.23°F) Uncertainty (k=2): ±0.43°C (±0.77°F) Uncertainty (k=2): ±0.43°C (±0.77°F) Uncertainty (k=2): ±0.43°C (±0.77°F) Electrical time constant 250 µs 250 µs 250 µs 250 µs 250 µs 250 µs Output signal range 0 V to 2.5 V DC 0 V to 2.5 V DC 0 V to 2.5 V DC 0 V to 2.5 V DC 0 V to 2.5 V DC 0 V to 2.5 V DC Response characteristics Thermal time constant 10 minutes 10 minutes 10 minutes 10 minutes 10 minutes 10 minutes Power requirements Supply voltage 4 V to 35 V DC 4 V to 35 V DC 4 V to 35 V DC 4 V to 35 V DC 4 V to 35 V DC 4 V to 35 V DC Supply current 300 µA max. (no load on output) 300 µA max. (no load on output) 300 µA max. (no load on output) 300 µA max. (no load on output) 300 µA max. (no load on output) 300 µA max. (no load on output) Installation Mounting Attaches to tower with included hose clamps Attaches to tower with included hose clamps Attaches to tower with included hose clamps Attaches to tower with included hose clamps Attaches to tower with included hose clamps Attaches to tower with included hose clamps Tools required 8mm (5/16 inch) nut driver or flat blade (-) screwdriver (to install hose clamps) Sheet metal shears or similar (for trimming hose clamps) 8mm (5/16 inch) nut driver or flat blade (-) screwdriver (to install hose clamps) Sheet metal shears or similar (for trimming hose clamps) 8mm (5/16 inch) nut driver or flat blade (-) screwdriver (to install hose clamps) Sheet metal shears or similar (for trimming hose clamps) 8mm (5/16 inch) nut driver or flat blade (-) screwdriver (to install hose clamps) Sheet metal shears or similar (for trimming hose clamps) 8mm (5/16 inch) nut driver or flat blade (-) screwdriver (to install hose clamps) Sheet metal shears or similar (for trimming hose clamps) 8mm (5/16 inch) nut driver or flat blade (-) screwdriver (to install hose clamps) Sheet metal shears or similar (for trimming hose clamps) Environmental Operating temperature range -40 °C to 52.5 °C (-40 °F to 126.5 °F) -40 °C to 52.5 °C (-40 °F to 126.5 °F) -40 °C to 52.5 °C (-40 °F to 126.5 °F) -40 °C to 52.5 °C (-40 °F to 126.5 °F) -40 °C to 52.5 °C (-40 °F to 126.5 °F) -40 °C to 52.5 °C (-40 °F to 126.5 °F) Operating humidity range 0 to 100% RH 0 to 100% RH 0 to 100% RH 0 to 100% RH 0 to 100% RH 0 to 100% RH Lifespan 10 years + 10 years + 10 years + 10 years + 10 years + 10 years + Physical Connections Wire leads: Signal (clear wire) Ground (black wire) Excitation (red wire) Shield wire for earth ground Wire leads: Signal (clear wire) Ground (black wire) Excitation (red wire) Shield wire for earth ground Wire leads: Signal (clear wire) Ground (black wire) Excitation (red wire) Shield wire for earth ground Wire leads: Signal (clear wire) Ground (black wire) Excitation (red wire) Shield wire for earth ground Wire leads: Signal (clear wire) Ground (black wire) Excitation (red wire) Shield wire for earth ground Wire leads: Signal (clear wire) Ground (black wire) Excitation (red wire) Shield wire for earth ground Cable length 5 m (16 ft) 67 m (220 ft) 90 m (295 ft) 5 m (16 ft) 67 m (220 ft) 90 m (295 ft) Weight 0.47 kg (1.04 lbs) 2.63 kg (5.80 lbs) 3.4 kg (7.6 lbs) 0.47 kg (1.04 lbs) 2.63 kg (5.80 lbs) 3.4 kg (7.6 lbs) Dimensions Sensor only: 30.5 mm (1.2") height x 12.7 mm (0.5") diameter Sensor with radiation shield: 127 mm (5") diameter x 127 mm (5 inches) height Sensor only: 30.5 mm (1.2") height x 12.7 mm (0.5") diameter Sensor with radiation shield: 127 mm (5") diameter x 127 mm (5 inches) height Sensor only: 30.5 mm (1.2") height x 12.7 mm (0.5") diameter Sensor with radiation shield: 127 mm (5") diameter x 127 mm (5 inches) height Sensor only: 30.5 mm (1.2") height x 12.7 mm (0.5") diameter Sensor with radiation shield: 127 mm (5") diameter x 127 mm (5 inches) height Sensor only: 30.5 mm (1.2") height x 12.7 mm (0.5") diameter Sensor with radiation shield: 127 mm (5") diameter x 127 mm (5 inches) height Sensor only: 30.5 mm (1.2") height x 12.7 mm (0.5") diameter Sensor with radiation shield: 127 mm (5") diameter x 127 mm (5 inches) height Materials Cable 3 conductor 22 AWG, with overall foil shield and drain wire, chrome PVC jacket 3 conductor 22 AWG, with overall foil shield and drain wire, chrome PVC jacket 3 conductor 22 AWG, with overall foil shield and drain wire, chrome PVC jacket 3 conductor 22 AWG, with overall foil shield and drain wire, chrome PVC jacket 3 conductor 22 AWG, with overall foil shield and drain wire, chrome PVC jacket 3 conductor 22 AWG, with overall foil shield and drain wire, chrome PVC jacket Probe Aluminum, epoxy filled Aluminum, epoxy filled Aluminum, epoxy filled Aluminum, epoxy filled Aluminum, epoxy filled Aluminum, epoxy filled Shield UV-stabilized thermoplastic solar radiation shield UV-stabilized thermoplastic solar radiation shield UV-stabilized thermoplastic solar radiation shield UV-stabilized thermoplastic solar radiation shield UV-stabilized thermoplastic solar radiation shield UV-stabilized thermoplastic solar radiation shield

• Application: Industrial
• Temperature Range: -40 to 450 deg C
• Probe Material: Stainless Steel
• Accuracy: Class B
• Probe Diameter: 8 - 20 mm
• Sensor Connection Wiring: 2 Wire

Stainless Steel 304/ 316/ 316L Tubes with one end closed for Temperature Sensors / Thermistors / Probe Tubes. Available in all diameters from 1.20mm to 8.0mm and in all lengths from 15mm to 300mm

• Feature: High tensile strength, Rust proof, Easy installation

• Type: : Plug & Jack Connector
•  :  
• Wetted Parts: : SS316
• Minimum OD: : 3mm
• Maximum OD: : 8mm
• Connection: : 1/4" - 1"
• Wire / Connector: : Omega

Mineral insulation. RTD with adjustable process connection for adjustable insertion length. Mineral insulation enables flexibility and Durability.

• Type: Temperature Sensors
• Application: Temperature Scaling
• Color: Black, Brown, Dark Brown, Grey, Light White, White
• Driven Type: Battery, Electric
• Feature: Non Conductive Liquid, Reservoirs Hoppers, Safety Interlocks, Solids In Storage Tanks, Suitable For Sensing Level, Visual Alarm System
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

The Danfoss range of temperature sensors is based on decades of global experience within the marine industry and in refrigeration plants - undoubtedly some of the toughest environments around. Even in these demanding surroundings you can trust our products; they have a long life thanks to their robust design.

• Temperature Range: 0 to 750 deg C
• Application: Industrial
• Country of Origin: Made in India
• Accuracy: +/- 2.5 deg C or +/- 0.75%)
• Class: Class 2
• Probe Material: Stainless Steel
• Assembly: Thermocouple Probe
• Probe Termination: Lead Wire

Ptfe insulated rtd cables rtd cables manufactured by bhuwal cables are used as connecting lead wire between rtd sensor and temperature indicator device. Rtd cables are made in 2 core, 3 core, 4 core and 6 core configurations, 3 cores being the most commonly used configuration. Construction: - rtd cables are made in three common constructions for making them suitable for different situations. These are ptfeptfe = this is the most common construction. In this the cores are insulated with ptfe and then cores are twisted and jacketed with ptfe. Ptfefg = in this construction cores are of ptfe and jacket is of fiber glass braid. This is used when rtd cable has to be installed in high temperature environment. Ptfespcptfe: - in this construction a spc wire braid shield is provided between twisted cores and jacket. This type of cable is used where higher accuracy is required. The current and voltage signals in rtd cables are of very small magnitude and can get affected by external electromagnetic noises produced by external devises such as motors, electronic equipments etc near the cable. The spc shield is grounded from one end and this protects the signals in the cable from these external noises.

• Brand Name: Ashe
• Color: Black
• Accuracy: 0.2% FS
• Usage/Application: Multichannel process monitoring
• Model Number/Name: MAX-16X
• Power Supply: 90 to 270 VAC, 50 Hz universal AC power
• Model: MAX-16X
• Input Sensors: RTD Pt-100 or Thermocouple J/K
• Load Driving Capacity: 600 Ohms
• Dimensions: 160 x 80 x 120 mm [W x H x D]

We cater to high precision Resistance Temperature Detector that is used in a number of industries. The Resistance Temperature Detector is manufactured & available in Simplex, Duplex and Triplex configuration. We also offer Pt 1000 Platinum RTD depending upon the requirement.

• Brand Name: Selet
• SUPPLY VOLTAGE: 17 / 28 Vdc
• LOAD: > 100 k
• POWER CONSUMPTION: < 15 mA
• SUPPLY VOLTAGE: 17 / 28 Vdc
• RIPPLE: < 10%

• Color: Silver
• Material: Aluminium
• Probe Diameter: 16 mm
• Probe Length: 300 mm

The integral flame monitoring system is primarily used for standard applications ( e.g. oil or gas flames at a burner in a combustion chamber ) because of its limited adjustment possibilities.

A prominent supplier of huge range of Temperature Sensor.

With Original Thermocouple Wires, PVC/PVC, Teflon/PVC 7/36 or Teflon /fiberglass/SS Braided Connection Wire One meter Long, Types K, J, PT100, M.I Cable types, With & Without Plugs Types : Leaf, Prick, Needle, Rod, Gas temperature, Roller, Bow, Bead, etc.

pressure trans meter, testing measuring instruments, timing switches

Our company is considered to be a reckoned entity engaged in offering an extensive range of rtd cables. We use finest quality materials accompanied by the advance technologies to manufacture these products. These are available in various sizes and length. Our clients can purchase these from us at market leading rates.

Wireless Magnetic Security Sensor, mild steel c channel

rh sensors / temperature sensors, Ultrasonic Flow Meters

Pressure Gauges, pressure hand pump, Calibration, Engineering Products

Multicore RTD Cable, K Type Compensating Cable

Electrical Goods, Proximity Switches, thermo couples

Cctv Systems, optical pyrometers, Calibrators, TEMPERATURE, pid controllers

Titanium Billet, but weld fittings, Flanges, Forged Fittings, nut fasteners

temperature detector, Camlock Coupling, Pipe Fitting