Tensile Tester Dealers in Mumbai

• Brand Name: Lapthink
• Model Number: XLW(EC)
• Place of Origin: USA
• Name: XLW(EC) Auto Tensile Tester

XLW (EC) Auto Tensile Tester can be used to measure tensile, peeling, deformation, tearing, heat sealing, adhesive, puncture force, opening force and low speed unwrapping force as well as other performance of plastic films, composite materials, soft package materials, plastic flexible tube, adhesives, adhesive tape, label stickers, medical plasters, release paper, protection films, combined caps, aluminium foil, diaphragm, back sheets, non-woven fabrics, rubber, paper, etc.

The UNIVERSAL TENSILE TESTER is used for determining the ability of the material to withstand forces that tend to pull it apart & to determine to what extent the material stretches before breaking.Different type of plastic materials are often compared on the basis of TENSILE, FLEXURAL STRENGTH, ELONGATION, & TENSILE MODULUS DATA. Many plastics are very sensitive to the rate of straining and environmental conditions. The tensile property data are more useful in preferential selection of a particular type of plastic from a large group of plastic materials.Tests for tensile strength (stress at fracture of the specimen) and elongation (extension of material under load of plastics. The first provides a measure of the breaking strength of the material but is radically affected by the rate of loading and the ambient temperatuere. Tensile strength in kgf/cm sq. = load (kgf) / a x b (cm sq.) Elongation % = (L2-L1) x 100/L1. Standard test methods : BS 2782 method 301, ASTM D 638, ISO R527.

• Features: Simple design and easy to operate, allows Adhesion tester AC-4624 to become a daily means of adhesion testing
• Breakout force, kg: 200
• Diameter of base dolly, mm: 15, 1 (№ 1) and 19, 5 (№ 2)
• Specific breakout force, MPa: Dolly №1 up to 10 MPa (100), Dolly №2 up to 6 MPa (60)
• Scale, MPa: 1 (№ 1) and 2 (№ 2)
• Weight of adhesion tester, kg, no more: 1
• Dimensions of adhesion tester, mm: 150 x 70
• Dimensions of package, mm: L180 x W150 x H100

To test the tensile strength of fabrics & yarns. Ikon Industries, Mumbai, India have four different models of Digital Tensile Testers as follows, Digital tensile tester instrument is a robust motor driven floor model machine which records breaking strength and elongation at break point with graph facility. Fabric strength tester or digital tensile strength tester machine works on a dead load principle fitted with 3 phase AC motor with a reduction gear box which runs at a constant traverse speed of 300 mm/minute. A set of grips is provided free of charge with tensile strength tester instrument. Fabric strength tester or digital tensile strength tester works in forward and reverse direction as desired and also has provision for overload safety. The strength scale calibrated in ranges up to 100,250, 500, 1000, 2500, 5000 kgs.   Technical Data 10 kgs : 0 – 10 x 2 gms 25 kgs : 0 – 25 x 5 gms 50 kgs : 0 – 50 x 10 gms 100 kgs : 0 – 100 x 20 gms 50 kgs : 0 – 250 x 50 gms 500 kgs : 0 – 500 x 100 gms 1000 kgs : 0 – 1000 x 200 gms 2500 kgs : 0 – 2500 x 500 gms 5000 kgs : 0 – 5000 x 1000 gms SPEEDS OF TRAVERSE : For rubber and flexible plastics : 300 and 500 mm/minute For fabrics and coated fabrics : 300 and 450 mm/minute For leather : 100 and 300 mm/minute For multiple applications : 50, 75, 100, 125, 200, 300, 400 & 500 mm/minute. Minimum grip separatio : 25 mm Maximum grip separation : 1000 mm Load measurement : With the help of a load cell and a digital display having arrangement to display the maximum load exerted during the test Elongation measurement  : Measured between grips on a scale from 0 to 1000 x 1 mm. Electric controls : Push button controls for up and down movement and stopping with The help of contactors. Micro-switches for over-travel protection, over-load  protection. Automatic stopping of motor on failure of test specimen  

• Brand Name: Flexitest
• Model Name/Number: MED-01
• Test Speed: Forward10,50,100,150,200,300 mm/min (standard)/Backward
• Accuracy: Better than 0.5% FS
• Load Cell Capacity: 250 N (standard) 50 N,100 N,500 N (optional)
• Number of Specimens: 1
• Specimen Width: 30 mm (Standard Grip),50 mm (Optional Grip)
• Clamping Way: Manual Specimen
• Clamp Stroke: 600 mm
• Instrument Dimension: 365 mm (L) x 585 mm (W) x 960 mm (H)
• Power Supply: AC 220 V,50 Hz
• Net Weight: 68 kg

• Weight: 38 kg (84 lb)
• Depth:: 410 mm (16 in.)
• Height:: 240 mm (9.5 in.)
• Width: 720 mm (28 in.)

Tensile testing is the most widely used method for indicating the serviceability of many papers. Tensile Energy Absorption (T.E.A.) indicates the durability of papers which are subjected to repetitive straining and stressing. The Horizontal Tensile Tester offers menu driven pre-selection of parameters and infra-red sample detection for quick, effortless testing. The tensile measurement aids in assessing the suitability of a product for its end use and close relationship between tensile strain and fiber bonding serve to make this a very important test. Büchel B.V. has developed the Horizontal Tensile tester to perform these relevant tests in a professional way. The instrument has a build in large black & white liquid crystal display that is used in a conversational mode, allowing input of specimen identity and all relevant test parameters. The test results are displayed and transmitted via the RS232-C serial output. The transmitted data may be used in a data acquisition system. Statistical data is calculated and displayed after the operator ends a test series. APPLICATIONS Newsprint, Packaging Papers, Liner, Medium, Carton board, Foils, Low elongation films STANDARDS ISO 12625-4 SPECIFICATIONS Selectable test speed of 5-120 mm/min (0.2-5.0 in/min) Load cell ranges 50N, 100N, 250N, 500N Clamping lengths 50, 100 and 180 mm Specimen width 15mm, 25mm or 0.5 in Meets TAPPI T-494, ISO 1924, AS/NZ 1301.448s, BS EN ISO 1924-2, CPPA D34, DIN 53112, SCAN P38 FEATURES Test statistics generated at the push of a button Load cell protected Auto return after test complete RS232 serial data output Wet test option Serial Printer output Multi-language standard Menu driven pre-selection of parameters and infra-red sample detection Two pre-set test types are machine direction and cross direction Optional software can add hand sheet tensile test MEASURED AND CALCULATED VALUES Average, Maximum, Minimum, Standard deviation, Coefficient of variation Tensile strength (KN/m-Newton-Lb) Elongation (%) and (mm) Tensile Energy Absorption TEA (J/m²) Tidx=Tensile Index (Nm/g) Eidx= Tensile Energy Absorption Index (J/kg) Tensile stiffness (kN/m) E-modulus (Gpa) CONNECTIONS Electrical:110v/60Hz or 220v/50Hz, 1Ph Air: (instrument quality) 600 kPa

• Features: Light weight and portable Precise pendulum mechanism for simultaneous determination of strength and elongation In-built calibration and specific probes
• Benefits: Precise pendulum mechanism for accurate measurement of strength and elongation at the same time

The FibroStelo (Stelometer) provides accurate assessment of the tensile strength and elongation of a flat fibre bundle. It does this by accurately measuring the force and elongation of the bundle with zero or 18" (3.2 mm) clamp space. This table top model is designed for ergonomic comfort and works on the constant rate of loading (CRL) principle. An assortment of accessories including torque vice for easy preparation and testing of sample are available as well.

• Power Supply: 230 V, AC
• Frequency: 50 Hz
• Drive motor power required: 0.5 HP
• Phase: Single Phase
• Column clearance: 380 mm
• Test Speed: 5mm/min to 300mm/min
• Displacement resolution: 0.2 mm
• Max. Test Force: 0.5 N
• Max. crosshead displacement without grips/fixtures: 900 mm

Tensile Tester, cable testing equipments, Needle Flame Test Apparatus

Auto Tensile Tester, NH300 Colorimeter, Inventory Control Service

Tensile Tester, Calibration, TEAR CUTTER, Izod Impact Tester