Testing Equipment Dealers in Dindoshi, Mumbai

We offer test probe 31. Reference standard:iec61032 figure 14 test probe 31. technical parameter:rod:diameter 25mm, 80mm long, interchangeable metal or delrin probe.

• Type: Fancy
• Certification: ISI Certified
• Application: Electrical Equipment Testing
• Color: Green
• Power Source: Electric
• Feature: Easy To Use, Superior Finish, Water Proof
• Pack Size: 36 Pcs.

• Brand Name: Prestige Electronics
• Application: Industrial, Laboratory
• Usage/Application: Industrial
• Measurement range: 0.01 micro ohms to 2 ohms
• Basic accuracy: 0.05%
• Resolution: 0.01 micro ohms
• Test current: 100 / 200 A DC
• Measurement technique: True 4-wire/ Kelvin measurement
• Temperature coefficient: 50 ppm
• Computer Interface: Yes
• Memory storage: 2500 readings

Over the last 32 years, Delta have supplied virtually thousands of custom-built-equipment. Various industries spanning from caustic soda plants, aluminum plants to electrical equipment mfrs. like switchgear, motor/pumps appliances etc. For switchgear division of L & T, we have fabricated a range of equipment to suit their testing needs. Tailor made DPM's such are these with isolated 0 -10 VAC interface outputs or with band-pass comparator set-point limits have satisfied many different testing needs. Delta's specialty has been the value addition to their standard range of equipment for creation of specific application equipment. 

• Country of Origin: India
• Type: Data Acquisition System
• Weight: 0-500Gm
• Condition: New
• Automatic Grade: Automatic
• Brand Name: Nippon

Nippon Technologies was established in 1991 with the objective to design & manufacture INSTRUMENTATION products. In the journey of twelve years range of products delivered have become 'benchmark' in the industry. A milestone was reached in 1997 with introduction of state-of- art data acquisition system The customer acceptance was enormous.

All type of water meters brand kranti, capstan,.etc.

• Measuring Range: 0- 100 degree.
• Resolution: 0.5HD.
• Indenter tip stroke: 0-2 .5 mm.
• LCD Display: 4 digits, 40 x 18 mm (1.57 x 0.71 inch).
• Power Supply: 1 x SR44 button cell battery (included).
• Item Size: 87 (L) x 56 (W) x 25 (D) mm (3.43′ x 2.20′ x 0.98′ inch).
• Weight: 136 g (4.79 oz).

Digital shore hardness tester is mainly used to measure the hardness of vulcanized rubber and plastic products; there are A, C, D three types. Type A and D are respectively suitable to measure the hardness of low, medium hardness and high hardness rubber. Type C is suitable to measure the hardness of cellular rubber and plastic material usually with the compression ratio 50%, the pressure more than 0.049MPa. The product confirms to the standards of GB/T531, GB2411, HG/T2489, and JB6148.

• Power: Programmable from 5 to 20
• Dimensions (L x W x H): (339 x 312 x 270) mm

Electromagnetic sieve shaker iTime mode: 1 sec pause in sieving process after set interval of 10 to 99 sec. Noise levels: Less than 61 dB without sieves at maximum amplitude.

We are offering electric testers - (elt - 002) etc.

• Accuracy: 1.5% full scale
• Warranty: 1 Year
• Display Type: LCD with Backlit
• Model Name/Number: EC33
• Brand: Horiba Scientific
• Measure Range: 0 to 200mS/cm
• Usage/Application: Laboratory
• Batteries: supplied with meter
• Features: LCD display
• Temperature Range: 5 to 40 Deg C
• Probe: titanium coated with platinum black sensor
• Number Of Ranges: Auto ranging
• Type Of Temperature Compensation: Automatic

• Feature: Sine wave, low power circuit.,Electronic switching based unique design.

We manufacture Spark Testers for extrusion and rewind lines to check for defects in cable insulation. Cable passes through in a high-voltage bead chain electrode in the spark tester, and any insulation fault causes a spark from this electrode to the ground via cable core. Any spark is detected by spark tester electronics and registered as a fault. By using spark testers at your extrusion or rewind lines, you can monitor your cable product. If there is any fault in cable insulation, the spark tester will warn you by its alarm and you can search the possible cause and fix the problem, so you get product without any faults.

Gk-300 precious metal tester gk-300 (simply easy & accurate gold k, pt testing) capacity : 0.01-300g gold : k9-24 & % density : 0.01gcm3 features gold : lo, k9, 10, 12, 14, 16, 18, 20, 21, 22, 23, 24 & purity 99% density : 1 to 0.01gcm3 (depends on weight of sample ) measuring range 0.01 to 300g minimum weight 5g weight dimension : 1.54 kg 218-190-170mm power supply ac100-240v calibration weight equipped option : airtight windsheild, compact printer.

It is commonly used for visual level indication of liquids, which attack glass or are hazardous, flammable, toxic, aggressive, agitated, contaminated and under high temperature & Pressure i.e. for services where glass gauges are unsafe. Features :Rugged gland less construction to provide safety in handling toxic, flammable & highly corrosive Liquid. Suitable for glass attacking liquid, where conventional gauge glass can not be used Construction & Operation :It consists of a chamber and an internal float in non-magnetic material compatible with the liquid. The float containing a magnetic system rides on liquid level and is coupled to an external visual indicator, which comes in two options. The simnpler & economical design consists of a RED magnetic follower Capsule, that moves within a glass tube Filled with water (to reduce friction) and can be read against a scale. The Other system is expensive and consists of a series of Bi-colour flappers. White on front side and contrasting RED on the reverse. These flappers rotate corresponding to float movement, thus changing their colour from white to red as the float rises and vice-versa when the float falls. As such the liquid represented by an external RED coloumn. Operating Principle :These models consist of Bi-coloured magnetic rollers equipped with small rod magnets which are rotated one after another at an angle of 180o by the directed field of the Permanent magnet inside the float.In addition, Level sensing elements can be fixed directly to the float cage, so that simultaneously liquid level is electrically measured through smart transmitter with output of 4-20mA. It is possible to connect Level indicating Meters and Set Point Relays at any distance for control and display purpose. The Magnetic Level transmitters can also be supplied with HART PROTOCOL.Moreover it is possible to attach bistable Magnetic Switches to the Magnetic Level indicator in order to get switching at any desired liquid level.

• Type: Test Probes
• Application: Instrument Testing
• Feature: Quality Approved, Smooth Performance
• Warranty: 1 Yr
• Standard Wire Length: 1 Metre
• Test probe: 4mm

• Resolution: : WVGA 800×480
• Contrast: : 500:1
• Brightness: : 250 cd/m2
• Aspect ratio: : 16:9
• Viewing angle: : 70°/70°(L/R) 50°/70°(U/D)
• Input Power : USB(DC5V)
• Power consumption : 3W
• Operating temperature : -20℃
• Storage temperature: -30℃
• Unit Weight: : 330g
• Dimension (LWH): : 190 x 128 x 24.8mm
• Supported Operating Systems:: Windows XP Service Pack 2 or after: 
• Supported: Windows 2000 Service Pack 4 or after: 
• Supported: Windows Server 2003: 
• Not supported: Windows Vista: 
• Supported (except 64bit system): Mac OS: 
• Not supported: Linux OS:

We offer original & synthetic diamond tester.

• Current Rating –: 20 amps/10 KV

High quality Multimeter test probeInsulation – PolypropelenePin – BrassSpring – Phospherous Bronze

• Type: Alcohol Breath Detector
• Certification: CE Certified
• Application: Alcohol Testing
• Color: Multicolor
• Automatic Grade: Semi Automatic
• Power Source: Battery
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Superior Finish, Water Proof
• Warranty: 1year
• Temperature Capacity: High Temperature, Low Temperature, Medium Temperature

We supply technically sound Breath Alcohol Detector that identifies the blood alcoholic content in seconds. Our Digital Breath Alcohol Detector is available under the brand name of BACTRACK breathalyzer. Digital Breath Alcohol Detector, offered by us, is designed with advanced technology and in an innovative and user friendly design. Salient features of our Digital Breath Alcohol Detector. Sleek design Simple Accurate Easy to use Attractive design Professional accuracy Today, we have carved a niche as one of the key Electronic Breath Alcohol Detector Suppliers in India.

The automatic 9000N Series Brinell hardness tester displays the hardness result without using a Brinell scope. Used for high volume testing without operator influence. Uses a Rockwell-type method with a standard Brinell ball and test load to read out directly in Brinell scales. The Newage® 9000N Series production tester makes a Brinell impression in conformance with the standard method for Brinell testing as described in ASTM E-10.  These testers are typically used in custom applications where Newage Testing Instruments customizes this tester for the customer’s exact testing requirements.  The resulting impression may be measured optically to determine the Brinell number.  However, the 9000N Series automatically measures the depth of the impression, similar to the Rockwell method.  The depth of the indentation method is described in ASTM E103.  This technique offers users greater testing speed and reduced operator influence on test results.  Like a Rockwell test, the 9000N Series applies a preload and then a major load.  The depth of measurement is calculated on the difference between these loads.The 9000N Series also feature a special test reference device- a floating nose piece that surrounds the indenter and which references the surface of the specimen.  This allows the tester to retain accurate readings throughout the entire load application and that is allows testing on specimens that may be out of level by up to 2-degrees.  This means that castings with a normal draft angle may be tested with accurate results.  Also, normal dimensional variation on parts will not adversely affect the result. With Many Applications in Primary Metals, Automotive and Transportation Manufacturing, Oilfield Pipe and Pressure Vessels, etc

Application Specially used for laboratory evaluation of Soaps, detergents, dyestuffs, surfactants, cleaners for textiles & other materials. Fabrication : Heavy angular structure with CRCA / M.S. duly non-contaminant epoxy powder coated. It has a water bath with S. S tank, Six 2-litre S. S beakers, six motor-driven S. S agitators. Working : It gives scaled reproductions of larger washer, This is a 6 place washing machine simulating the action of the agitator type washer. Determination : Detergent valve of soap, synthetic detergents, & other washing compounds. Washability of fabrics. Colour fastness of textile materials. Optimum temp. & rotary action cycle for a liquid phase until process   Temp. Control: Microprocessor based PID temp. controller for water bath, agitator speed controller, automatic timer to set" wash" & rinse cycles. Special Care : Suitable K.V.A. Servo Controlled Voltage Stabilizer is strongly recommended. * Due to continuous development & improvements in design, we reserve the right to change the specification without notice

CORROSION MONITORING Division with a high technical skills base in corrosion, erosion and materials degradation processes and mechanisms. applies knowledge, skills and experience to provide solutions and systems that optimise the safety, integrity and life cost of clients' assets. Specialist cathodic protection (CP) services for the offshore industry, which includes the design, supply and installation of CP systems and monitoring.

• length: 200 mm
• diameter: 4 – 38 mm

The Tester is a mechanical tester used to determine the effects of bending on the elasticity, adhesion and elongation properties of cured coatings on sheet metal. The frame has a bending lever with a roller 200 mm length which pivots on a steel conical mandrel with a diameter from 4 – 38 mm. A graduation indicates the mandrel diameter in both mm and inches.

• Country of Origin: Made in India
• Features: high gloss to matt finish surface, Excellent reproducibility, Small and user friendly, single key operation, Automatic calibration.
• Model Name/Number: Trio
• Usage/Application: Laboratory
• Brand: Lloyds
• Weight: 350 gm
• Measurement Range: 0-200 Gloss Units (GU)
• Size/Dimension: 110 x 65 x 38 mm
• Repeatability: 0.3 GU
• Reproducibility: 00.5 GU
• Measuring Time: 0.5 seconds
• Operating Temperature: 15 to 40 Degree Celsius

Static Meters measure static electricity and are an excellent tool to trouble shoot a suspected problem related to static electricity and to test the performance of ionizers. You can measure static electricity and troubling shooting a static related problem easly with a Model 9000 static meter . It sometimes is helpful to identify and quantify the electrostatic or static electricity charge. The Model 9000 Locater is the perfect tool for this purpose. After choosing the proper static eliminator products, Static Locater is an ideal tool for determining its effectiveness and when maintenance is required.

• Material: Stainless Steel
• Application: Laboratory
• Model Name/Number: KTS 041
• Packaging Type: Box
• Display Type: Analog

• Brand Name: Puretronics
• Voltage Range: 0 - 25 kv
• Dimension: 450 x 336 x 405 mm
• Electrode: Bead Chain housing of 350mm long
• Sensitivity: Adjustable sensitivity knob
• Approximate Weight: 20.4 Kg
• Test Frequency: 2.5 - 3.5 kHz
• Wire Size: 0.5 - 15 mm
• Wire Speed: 2500 mts/min
• Fault Counter: Digit LCD
• Safety: Door Interlocking
• Wire Running Height: 900 mm to 1100 mm