Testing Equipment Dealers in Goregaon, Mumbai

• Frequency: 45 to 65Hz
• Usage: Industrial
• Brand: Prestige Electronics
• Display: 4 Digits Red LED
• Range: 0 to 360.0 Degrees
• Resolution: 0.1 Degrees
• Accuracy: 0.5 % +- 1digit (100% -10%), + 0.5% (10% 2%) + 1.5% (> 2%)
• Input Voltage Range: 50 to 500V.AC
• Input Current Range: 100mA to 20A

We are offering electric testers - (elt - 002) etc.

• Range of hardness: 30-85 IRHD.
• Diameter of indenter lip: 2.50 mm.
• Pressure foot: 20mm OD/6mm ID.
• Force on pressure foot: 8.30 N.
• Contact force: 0.30 N.
• Indenting force: 5.40 N.
• Electric supply: 220 Volt AC Single Phase.

IRHD hardness testers (IRHD = International Rubber Hardness Degree) determine the indentation depth of materials, from foams to rigid plastics and rubber.A measure of the indentation resistance of elastomeric or rubber materials based on the depth of penetration of a ball indentor.An initial contact force is applied to an indentor and the penetration is set to zero. The force is increased to a specified total load and the depth of penetration is measured. The IRHD value is related to the depth of indentor penetration. IRHD Hardness Standards : ASTM D1415, DIN 53519 Sheet 2, ISO 48.

Humidity Logger is a brainchild of Nippon Technologies. State-of -the-art micro controller design is a high performance solution for various HUMIDITY applications. It accepts two 4-20 mA inputs. One for Humidity and another for Temperature. Generally the signal comes from humidity transmitters. Typical applications Humidity Chambers Pharmaceutical & Clean room applications. HVAC Storage rooms, Cold storages and Ware Houses. Building Automation & Green houses

• Accuracy: 1.5% full scale
• Warranty: 1 Year
• Display Type: LCD with Backlit
• Model Name/Number: EC33
• Brand: Horiba Scientific
• Measure Range: 0 to 200mS/cm
• Usage/Application: Laboratory
• Batteries: supplied with meter
• Features: LCD display
• Temperature Range: 5 to 40 Deg C
• Probe: titanium coated with platinum black sensor
• Number Of Ranges: Auto ranging
• Type Of Temperature Compensation: Automatic

Over the last 32 years, Delta have supplied virtually thousands of custom-built-equipment. Various industries spanning from caustic soda plants, aluminum plants to electrical equipment mfrs. like switchgear, motor/pumps appliances etc. For switchgear division of L & T, we have fabricated a range of equipment to suit their testing needs. Tailor made DPM's such are these with isolated 0 -10 VAC interface outputs or with band-pass comparator set-point limits have satisfied many different testing needs. Delta's specialty has been the value addition to their standard range of equipment for creation of specific application equipment. 

• Temperature range: 30 to 40 oC
• Speed range: 1 to 200 RPM

Tablet dissolution tester Heater: 1.2 kW230 VAC, material S.S. 304 with sensor. Material: 8 mm thick acrylic. Timer: 1 min to 99 hrs and 59 min.

• Type: Alcohol Breath Detector
• Certification: CE Certified
• Application: Alcohol Testing
• Color: Multicolor
• Automatic Grade: Semi Automatic
• Power Source: Battery
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Superior Finish, Water Proof
• Warranty: 1year
• Temperature Capacity: High Temperature, Low Temperature, Medium Temperature

We supply technically sound Breath Alcohol Detector that identifies the blood alcoholic content in seconds. Our Digital Breath Alcohol Detector is available under the brand name of BACTRACK breathalyzer. Digital Breath Alcohol Detector, offered by us, is designed with advanced technology and in an innovative and user friendly design. Salient features of our Digital Breath Alcohol Detector. Sleek design Simple Accurate Easy to use Attractive design Professional accuracy Today, we have carved a niche as one of the key Electronic Breath Alcohol Detector Suppliers in India.

• Features: Sine wave, low power circuit.,Electronic switching based unique design.

We manufacture Spark Testers for extrusion and rewind lines to check for defects in cable insulation. Cable passes through in a high-voltage bead chain electrode in the spark tester, and any insulation fault causes a spark from this electrode to the ground via cable core. Any spark is detected by spark tester electronics and registered as a fault. By using spark testers at your extrusion or rewind lines, you can monitor your cable product. If there is any fault in cable insulation, the spark tester will warn you by its alarm and you can search the possible cause and fix the problem, so you get product without any faults.

All type of water meters brand kranti, capstan,.etc.

Gk-300 precious metal tester gk-300 (simply easy & accurate gold k, pt testing) capacity : 0.01-300g gold : k9-24 & % density : 0.01gcm3 features gold : lo, k9, 10, 12, 14, 16, 18, 20, 21, 22, 23, 24 & purity 99% density : 1 to 0.01gcm3 (depends on weight of sample ) measuring range 0.01 to 300g minimum weight 5g weight dimension : 1.54 kg 218-190-170mm power supply ac100-240v calibration weight equipped option : airtight windsheild, compact printer.

• Material: Stainless Steel
• Application: Laboratory
• Model Name/Number: KTS 041
• Packaging Type: Box
• Display Type: Analog

• Features: Electronic switching based unique design.,Confirms to National / International standards.
• MODEL: PST -15 / PST -10
• VOLTAGE RANGE:: 0.5 / 15 KV
• TEST FREQUENCY:: 2.5 TO 3.5 KHZ
• WAVE FORM :: A.C. SINE WAVE

We manufacture Spark Testers for extrusion and rewind lines to check for defects in cable insulation. Cable passes through in a high-voltage bead chain electrode in the spark tester, and any insulation fault causes a spark from this electrode to the ground via cable core. Any spark is detected by spark tester electronics and registered as a fault. By using spark testers at your extrusion or rewind lines, you can monitor your cable product. If there is any fault in cable insulation, the spark tester will warn you by its alarm and you can search the possible cause and fix the problem, so you get product without any faults.

• Depth: 410 mm (16 in.
• Height:: 240 mm (9.5 in.)
• Width: 390 mm (15 in.)
• Weight: 22 kg (48 lb)

INTRODUCTION The Short Span Compression Tester is an advanced microprocessor-controlled instrument for determining the compression strength of fluting medium or test liner, and offers unrivalled repeatability and reproducibility. Considerable cost savings are possible through accurate prediction of corrugated component performance. APPLICATIONS Paperboard, Paper, Liner, Medium, Paper/Film/FoilLaminations SPECIFICATIONS Load cell range: 0-500N Clamp length: 1.2 in (30 mm) Free span: 0.03 in (0.70 mm) Adjustable clamping force Load cell capacity: 100 lb (444 N) with overloadprotection Conforms to TAPPI T-826, ISO 9895, SCAN P46,AS/NZ 1301.4SO RP, BS 7325, DIN 54518 FEATURES Unique clamping mechanism Test statistics at the push of a button Selectable units kN/m, lb/inch, N Load cell with overload protection Easy to read display Traceable calibration RS232 serial data output

Precision Dead Weight Tester from the famous German manufacturer DRUCK & TEMPERATUR Leitenberger GmbH now available in India through Adarsh Industries, Mumbai. The dead weight testers uses the finest of piston which is made from hardened steel and cylinder made from tungsten carbide. All Dead Weights are available with factory calibration certificate or optional DKD-DAkkS certification is also available.

• Sampling: 3 sets
• Deformation display: Didital micrometer
• Testing Method: HDT / VICAT
• Temperature Range: Room temp.
• Temp.Accuracy: ± 0.5 °C
• Increasing Rate of Temperature: 2 ± 0.2°C / min or 50 ± 5°C / hr
• Cooling method: Water cooling
• Dimension (W×D×H): 119 × 70 × 75 cm
• Weight (main unit): 225 kg
• Power: 1AC220V50/60Hz (Specified by user)
• Item Code: HV-2000-M3W

• Certification: CE Certified
• Color: Brown, Pink
• Voltage: 220V, 230V
• Driven Type: Electric
• Warranty: 1year, 2years, 5 Years
• Automation Grade: Automatic, Fully Automatic, Semi Automatic
• Condition: New,Used
• Use: Petroleum Testing

• Auxiliary Weight: 250 gm, 500 gm, 1 kg Load (Each Arm)
• Counter Weight: 125 gms and 175 gms
• Platform speed: 60 ± 2 rpm