Testing Equipment Dealers in Kanjurmarg East, Mumbai

as per Tappy T – 815 standard to determine the coefficients of friction between film to film, film to metal and film to glass. Specification: Speed : 1.5º to 2.0º / second.Weight of the sled: 750 grams. Size of sled : 4 inch X 2 inch. Accessories : 2 nos. of S.S templates. Paint : Powder coated. Power : 230 Volts, 50Hz, single phase.

• Voltage: 220
• Power Source: Electric
• Pressure Gauge: 2 Kg/cm2
• Power: 110 W
•  :  

• Voltage: 380V
• Type: Digital
• Frequency: 60 Hz
• Phase: Three
• Model Name/Number: ER300P
• Current: 60 Amp
• Current Type: AC

• Application: Industrial
• Warranty: 1 Year
• Weight: 860G,850G
• Model Name/Number: LCD DISPLAY BATTERY TESTER,DIGITAL CAR BATTERY TESTER ANALYZER 6V 12V
• Rated Voltage: 12 Volt
• Brand Name: VANNEL
• Power Supply: BATTERY VOLTAGE,6V 12V
• Rated Capacity: 2 - 200 Ah, 80AH
• Accuracy: 40Ah-200Ah
• Minimum Order Quantity: 5 Piece

• Weight: 90 Gm
• pH Range: -1.0 To 15.0 PH
• Brand Name: Thermo Scientific
• Model Name/Number: pHTestr 10
• Usage/Application: Research purpose, Labs
• Type Of Ph Meter: Hand-Held
• Dimension: 16.5 x 3.8 cm
• Resolution: 0.1 pH

• Type: Data Loggers
• Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Color: Brown, Green, Grey, Maroon, Red, White
• Voltage: 3-6VDC, 6-9VDC, 9-12VDC
• Power Source: Battery, Electric
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

• Power: 10 Watt
• Voltage: 90-250V
• Frequency: 50/60Hz
• Operating Temperature: 15 to 45 deg C
• Capacity: 300g

EMS is dedicated software packed for the monitoring and management of electrical, water, gas and thermal energy metering systems. Energy Management Systems are intelligent systems designed to monitor & control the energy consumption of homes (Home Energy Management System - HEMS), buildings/offices (Building Energy Management System - BEMS), or estates/campuses.

to check the adhesive strength between two samples. Specification: Load capacity : Up to 5 kg.* No. of load cell: One. Cross Travel : Up to 250 mm* Speed : 300 mm/minute. Direct display : Peak load. Paint : Powder coated. Power : 230 Volts, 50 Hz, single phase.

• Application: Car Use
• Color: Red
• Condition: New
• Driven Type: Electric
• Feature: Heat Resistance, Long Life, Non Breakable, Stable Performance
• Warranty: 5yrs

Based in Mumbai, Maharashtra (India), we are the preeminent Manufacturer and Supplier of Car Battery Testers. Produced as per the industry-stated norms & standards, our Car Battery Testers are performance oriented, durable, corrosion resistant and easy to use. These Testers are used to determine the amount of power left in automotive battery. We also provide Constant Current Battery Chargers, Automobile Battery Chargers and Motorcycle Battery Charger.   Features : Reliable performance Tough in construction Easy to use   Details : Range - 8-20 V and 0 - 150 A Suitable tor Battery Testing Size - 110 X 280 X 60 mm Price - Approx Rs 3,500.00 / Piece

Quality earth rods are commonly made from either solid copper, stainless steel or copperbonded steel. Three types of earth rod are available, but the copperbonded steel cored rod is by far the most popular, due to its combination of strength, corrosion resistance and comparatively low cost. Solid copper and stainless steel rods offer a very high level of corrosion resistance at the expense of lower strength and higher cost. Diameter of rodOne common misconception is that the diameter of the rod has a drastic effect on lowering earth resistance. This is not true! As the graph shows, you only lower the resistance value by 9.5 per cent by doubling the diameter of the rod (which means increasing the weight and the cost of the rod by approximately 400 percent). Thus the rationale is: Use the most economical rod that soil conditions will allow you to drive. This is one of the ways to ensure that you don’t waste money on over-dimensioned rods. Thread and shank diametersConfusion often arises between thread and shank diameters for threaded rods. The thread rolling process, used by quality rod manufacturers, raises the surface of the rod so that thread diameter is greater than shank diameter. All threads are Unified National Coarse (UNC-2A).

This compact EM101+ single phase meter fits snugly into any meter box. The bright back-lit display ensures ease of reading. Features: Class 1 accuracy as per IS and IEC standards Forward energy recording irrespective of current direction Indication for power on, current reversal and ELT Reset backups Multi-tariff Time of the Day metering High surge withstand capability Load Survey (Interval Data) Anti-tamper features Optical portRS 232 portLow Power Radio (optional)

the apparatus for testing consists of a clased acrylic testing chamber,whare a salted solution (mainly, asolution of sodium chloride) is sprayed by means of a nozzle.this produces a corroding environment in the chamber and thus, parts in it areattacked under this severe corroding atmosphere.   chamber size: 1) (l) 910mm x (w) 1) (l) 910mm x (w) 510mm x (h) 310mm 2) (l) 450mm x (w) 250mm x (h)250mm • chamber construction material : acrylic • hood in acrylic • solution reservior tank (capacity-30ltr) • control panel (temp. Indicator/controller, time totalizer) • power requirement: 230vac + 10%, 50hz. • extra accessories : air compressor

• Features: Displays cost of operation per minute, hour, and day, Battery backup stores setup data when removed from outlet, Visual alarm warns of current overload, Front socket design provides easy connection.
• AC Min (Volts): 100
• AC Max (Volts): 150
• Display: LCD
• Width (in): 2.6
• Height (in): 5.1
• Depth (in): 1.5

• Model: HV-EXP4313

Digital Multimeter Model Science Labs Product description: DC Voltage : 200mV-1000V +0.5% +2 digits AC Voltage : 200V-750V +1.2% +10 digits DC Current : 200mA-10A +1% + digits Resistance : 200Ohms-2000kOhms+0.8%+2 digits Max. Display : 1999 Display Size : 16x48mm., 3½digits LCD Range : Manual Transistor Test : Yes Standard Accessories : Battery, Testing Probes with Instruction Manual, in case, CE Marked.

• Power: 230 Volts, 50 Hz, single phase.
• Dart: 2 nos.
• Weights: A set of weights ranging from 5 grams to 500 grams would be supplied for
• incremental loads.:  
• Release mechanism: Electromagnetic.
• Vacuum creation: Single stage oil vacuum pump.
• Paint: Powder coated.

as per ASTM D – 1709 and IS 2508 to test impact resistance of plastic film by free falling dart method.

The principal behind determination of hardness by dead load apparatus is based on the measurement of the difference between the depth of indentation of a standard ball in to the rubber under a small contact force and a large indenting force. The Machine is as per IS-3400 (PART-II)1980.

• Type: Box Compression Tester
• Certification: ISO 9001:2008 Certified
• Application: Air Flow Testing, Water Flow Testing
• Color: Multicolor, Sky Blue, White
• Condition: New, Used
• Automatic Grade: Automatic
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish, Water Proof
• Warrenty: 1year
• Temperature Capacity: High Temperature, Low Temperature

• Accuracy: +/- 0.05pH
• Power Requirement: 230V AC +/- 10%, 50Hz
• Range: 0 to 14 pH

We are the leading supplier of this products.

The technology used on our home use body composition monitors is based on the same advanced technology found in professional body composition analysers widely used bydoctors, medical centres and by professional athletic teams. It is a first choice for professionals.

• Color: Grey, Black, Light Green, White
• Condition: New, Used
• Feature: Easy To Use, Electrical Porcelain
• Application: Industrial Use
• Voltage: 0-110 V, 110-220 V, 220-440 V
• Driven Type: Electrical
• Packaging Type: Box, Carton

A flow meter is a device used to measure the flow rate or quantity of a gas or liquid moving through a pipe. Flow measurement applications are very diverse and each situation has its own constraints and engineering requirements. You can measure flow through a variety of different devices such as Coriolis and positive displacement meters.  

It gives us immense pleasure to offer our clients an excellent assortment of glass dosing pumps and Sterility Test Equipment. These products are manufactured by making use of high grade stainless steel and mild steel and are compliant with the GMP standards. Furthermore, these products are extensively used in pharmaceutical, chemical, cosmetic and plastic industries.   Attributes: Trouble free functioning Longer service life Optimum performance.  

The idea behind pre-paid delivery of electricity is to shift the onus of paying the money for electricity in time from the provider to the user. In fact, in such a scheme, since the money for electrical energy used is collected in advance, there is going to be a positive cash flow for the electrical power provider. Also, the costs associated with the generation of the bills, delivery of the bills, and disconnection of the power supply in case the bills aren't paid on time is eliminated. Prepaid Energy Meters are based on the principle of microcontroller application. The Microcontroller will accept the number of units recharged by the concerned department person, counts the number of units consumed by the customer and as soon as the customer exceeds the recharged amount, it will disconnect the power supply to the customer until the next recharge. Whenever the number of units in microcontroller becomes zero, microcontroller sends a signal to “Contact Maker /Breaker circuit” which is nothing but the relay and this relay cuts off the power supply to the consumer until next recharge. Figure: Block diagram of on line pre paid energy meter      

• Sterility Test Unit47mm Stainless Steel (3 Branch Sterility)   • Sterility Test Unit47mm Stainless Steel (6 Branch Sterility   • Oil Free Vacuum Pump suitable for above Sterility  Model - PCI-75-S  Max. Flow - 45 LPM, Vacuum - 27" Hg (680 mm)  Max. Pressure - 55 PSig, 1/4 HP

• Weight: pH Measurment
• Usage/Application: Laboratory
• Range: 0-14pH
• Temp. Compensation: Manual
• Temp.Range: 0°-100° C
• Power: 50 Hz 230 V

• Accuracy: +/- 6 HLD
• Power: 1.5V
• Weight: 160-180g
• Memory: 270 reading
• min thickness of workpiece: 5mm
• working hours: 150 h
• max hardness: 960 HLD
• battery: AAA 1.5V
• Output: RS 232 to printer
• Operating Temperature: 0-40degree C
• Continuous Working Time: 150h
• Indentation Depth: Impact Device Data

• Feature: Easier operations,Precisely designed,Optimum performance,Elegant finish,Lightweight,Minimal maintenance

Testing under atmospheric pressure With atmospheric test chambers it is not necessary to evacuate air before the test process. Test chambers of this construction type can be manufactured at significantly lower cost with a significantly larger volume than vacuum chambers.We build these chambers with a chamber volume of up to 50 m³ as standard. This allows for reliable testing of even larger units and assemblies. However, we also recommend atmospheric testing when delicate, vacuum-sensitive components such as devices with touch screens need to be tested for their leak tightness.This system configuration also allows the filling of the test objects with SF6 gas in the test chamber and subsequent recovery of the gas. However, with atmospheric pressure, the test duration is on average 10 - 30 times longer as the increase in concentration for atmospheric pressure is significantly lower.