Testing Equipment Dealers in Kanjurmarg, Mumbai

• Power: 230 Volts, 50 Hz, single phase.
• Release mechanism: Electromagnetic.
• Vacuum creation: Single stage oil vacuum pump.
• Paint: Powder coated.

International equipments developed the first dart impact tester way back in year 1971 as per the ASTM D 1709 and IS 2508 standard. This equipment is mainly designed to check the impact failure weight of film and sheeting by a falling weight impact method. In addition to dart impact tester other equipment such as coefficient of friction, tensile tester, heat sealer, opacity tester, melt flow index tester, peel bond tester are also offered by international equipments Specification: Dart : 2 nos. Weights : A set of weights ranging from 5 grams to 500 grams would be supplied for incremental loads.

Specification:Temperature Controller: Digital PID Controller with range up to 300°C, Resolutionof 0.1°C & accuracy of +0.5°C. Pan: 500 Nos. of aluminium pans with 40 mesh screen in SS 316 will be provided as per DOT specification. Gas Flow Control: Gas Regulators & Rotometers will be supplied for Nitrogen & Oxygen Gas respectively. Indium material will be supplied for Calibration of temperature.PRINTOUTS THROUGH PC: The display & printout of Delta Temperature Vs Time graph along with Oxidation Induction Time result is Possible through your PC. The printout includes Party’s Name, address, file name, date, batch no, Operator name, Sample weight, Set temperature, Start time, Finish time, Gas flow rate etc.Calibration graph of melting point of indium metal along with printout facility is provided as per DOT Specification. Cooling System: Cooling of barrel by water is provided.

• Power: 230 Volts, 50Hz, single phase.
• Range: 0 – 99.9 % opaque.
• Direct display: % opaque.
• Paint: Powder coated.

check the opaqueness of plastic samples as per IS 4985 and IS 12235  Part 3.

• Color: Grey, Black, Light Green, White
• Condition: New, Used
• Feature: Easy To Use, Electrical Porcelain
• Application: Industrial Use
• Voltage: 0-110 V, 110-220 V, 220-440 V
• Driven Type: Electrical
• Packaging Type: Box, Carton

• Application: Industrial
• Warranty: 1 Year
• Weight: 860G,850G
• Model Name/Number: LCD DISPLAY BATTERY TESTER,DIGITAL CAR BATTERY TESTER ANALYZER 6V 12V
• Rated Voltage: 12 Volt
• Brand Name: VANNEL
• Power Supply: BATTERY VOLTAGE,6V 12V
• Rated Capacity: 2 - 200 Ah, 80AH
• Accuracy: 40Ah-200Ah
• Minimum Order Quantity: 5 Piece

• Voltage: 220-240 V
• Humidity range: 20% to 95%
• Material: Stainless Steel
• Power Source: Electric
• Temperature Range: 0-60 degree C

EMS is dedicated software packed for the monitoring and management of electrical, water, gas and thermal energy metering systems. Energy Management Systems are intelligent systems designed to monitor & control the energy consumption of homes (Home Energy Management System - HEMS), buildings/offices (Building Energy Management System - BEMS), or estates/campuses.

• Power: 10 Watt
• Voltage: 90-250V
• Frequency: 50/60Hz
• Operating Temperature: 15 to 45 deg C
• Capacity: 300g

• Type: Data Loggers
• Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Color: Brown, Green, Grey, Maroon, Red, White
• Voltage: 3-6VDC, 6-9VDC, 9-12VDC
• Power Source: Battery, Electric
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

• Weight: 90 Gm
• pH Range: -1.0 To 15.0 PH
• Brand Name: Thermo Scientific
• Model Name/Number: pHTestr 10
• Usage/Application: Research purpose, Labs
• Type Of Ph Meter: Hand-Held
• Dimension: 16.5 x 3.8 cm
• Resolution: 0.1 pH

The principal behind determination of hardness by dead load apparatus is based on the measurement of the difference between the depth of indentation of a standard ball in to the rubber under a small contact force and a large indenting force. The Machine is as per IS-3400 (PART-II)1980.

We are offering a wide range of High Rate Discharge Tester for Battery Testing. Our offered range of products are widely demanded by our clients at various market leading and affordable prices. Features: Rugged in construction Consistent performance Energy-efficient

• Voltage: from 40 V to 10/15 kV
• Wide measurement range: from 10 kΩ to 30 TΩ;
• Current: 5 mA

• Automation Grade: Automatic
• Accuracy (%): 1%
• Air Circulation: YES
• Capacity (L): 90
• Controller: Electronic
• Cooling Speed (c per min): 30 minutes

• Type: Box Compression Tester
• Certification: ISO 9001:2008 Certified
• Application: Air Flow Testing, Water Flow Testing
• Color: Multicolor, Sky Blue, White
• Condition: New, Used
• Automatic Grade: Automatic
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish, Water Proof
• Warrenty: 1year
• Temperature Capacity: High Temperature, Low Temperature

Testing under atmospheric pressure With atmospheric test chambers it is not necessary to evacuate air before the test process. Test chambers of this construction type can be manufactured at significantly lower cost with a significantly larger volume than vacuum chambers.We build these chambers with a chamber volume of up to 50 m³ as standard. This allows for reliable testing of even larger units and assemblies. However, we also recommend atmospheric testing when delicate, vacuum-sensitive components such as devices with touch screens need to be tested for their leak tightness.This system configuration also allows the filling of the test objects with SF6 gas in the test chamber and subsequent recovery of the gas. However, with atmospheric pressure, the test duration is on average 10 - 30 times longer as the increase in concentration for atmospheric pressure is significantly lower.

The idea behind pre-paid delivery of electricity is to shift the onus of paying the money for electricity in time from the provider to the user. In fact, in such a scheme, since the money for electrical energy used is collected in advance, there is going to be a positive cash flow for the electrical power provider. Also, the costs associated with the generation of the bills, delivery of the bills, and disconnection of the power supply in case the bills aren't paid on time is eliminated. Prepaid Energy Meters are based on the principle of microcontroller application. The Microcontroller will accept the number of units recharged by the concerned department person, counts the number of units consumed by the customer and as soon as the customer exceeds the recharged amount, it will disconnect the power supply to the customer until the next recharge. Whenever the number of units in microcontroller becomes zero, microcontroller sends a signal to “Contact Maker /Breaker circuit” which is nothing but the relay and this relay cuts off the power supply to the consumer until next recharge. Figure: Block diagram of on line pre paid energy meter      

single phase electronic energy meter#:6!6?:6!:D1:?1 11 #:6!F1#:6! (&
&
!'8::8:6!?1D:1:1!181

  Sanitary Applications in food and diary industries Waste water & Pure water application Process industries

• Type: Salt Spray Corrosion Cabinet
• Power: Electronic
• Usage: Salt spray chamber
• Test type: CASS
• Spray volume: 0.5---3.0

• Features: Improve spatial collection uniformity and accuracy, Fast, easy and repeatable alignment, Small footprint for a clutter-free workspace, User calibratable, Robust design

• TEMP. RANGE: -1°C to – 2°C
• EACH CHAMBER SIZE: 7” x 14” x 6”

The unit designed to meet the test method of ASTM D-2500-88D-97. For use to carry test of any petroleum oil as per test method. The bath is triple walled in construction with inner chamber made of stainless steel & exterior of G.I sheet duly finished in powder coated shade. The top surface of units is of hylembakelite thick sheet for easy cleaning. Each compartment having 4 test jacket made of copper cylindrical flat bottom -45 mm dia x 115 mm HT. Test jar made of clear cylindrical glass flat bottom 30 to 33.5 mm dia x 115 to 125 mm height. All 4 compartment having 4 cooling system which includes hermetically sealed compressor, condenser, fan motor etc- CFC free Cooling system. All 4 Compartment Temperature are being controlled by separate solid-state electronic temperature controller and Digital indicator. Selection of single, two or three chamber also.

Flow Range : DFM-01 : 1 ml/min. to 50 ml/min. with least count of 0.1 ml/minDFM-02 : 5 ml/min. to 500 ml/min. with least count of 1 ml/minDFM-03 : 200 ml/min. to 2000 ml/min. with least count of 1 ml/minDFM-04 : 1 ml/min. to 500 ml/min. with least count of 0.1 ml/min (auto range)DFM-05 : 1 ml/min. to 1000 ml/min. with least count of 0.1 ml/min (auto range)DFM-06 : 10 ml/min. to 400 ml/min. with least count of 1 ml/min. (auto range)DFM-07 : 0.5 mL/min to 750 mL/min, auto-rangingDFM-08 : Flow for gases across a range of 5-500 mL/min

HI 98301 (DiST1) : 1999 ppm (mg/l); 1ppm; Rs.2,856/- 12) HI 98302 (DiST2) : 10.00g/L (ppt); 0.01g/L Rs.2,856/-  13) HI 98303 (DiST3) : 1999 µS/cm; 1µS/cm Rs.2,856/- 14) HI 98304 (DiST4) : 19.99mS/cm; 0.01 mS/cm; Rs.2,856/-  15) HI 98311 (DiST5) Combo: Waterproof, 3999µS/cm/ TDS 2000ppm / Temp. 60º C; 

• Feature: Easier operations,Precisely designed,Optimum performance,Elegant finish,Lightweight,Minimal maintenance

Deflection Magnetometer - Compass box fitted on polished wooden base made of non-wrapping wood with meter scale alongside its length. Compass box is removable.

• PLATING: BASE
• •: Nickel
• Aluminum, Brass, Copper,Chromium, Steel: •
• Chromium: Nickel, Brass, Cadmium, Copper, Steel,SS
• •: Silver
• Copper, Brass, Nickel, Aluminum,Tin: •
• Tin: Copper, Brass, Nickel, Steel
• •: Zinc
• Steel, Aluminum,Brass, Copper, Nickel: •
• Cooper: Steel, Aluminum, Nickel, Non-Metals
• •: Lead
• Aluminum, Brass, Copper, Steel: •
• Gold: Brass, Copper, Nickel
• •: Electro less-Nickel
• Steel, Aluminum: Type
• Destructive: Measuring Range
• 00.1 to 99.9 microns: Resolution
• 0.1 micron: Accuracy
• +2% of reading: Measuring surface
• 3mm x 3mm flat surface for round 3mm dai: Power Supply
• 230V / 50Hz: Dimensions
• 240mm x 210mm x 110mm: Weight Main unit
• 3.5 Kg.: Accessories weight

• Brand Name: HOFLER, KLINGELNBERG, MAAG, CARL MAHR, GOULDER MICRON, OSAKA, DAVID BROWN, FRENCO

We are offering gear lead profile testers. Hofler : efr 401 401 mz efr 630 631 efrs 401 401 a efrs 631 631 a hfr 630 1300 ... emz 400 401 402 emz 630 631 632 .... zme 400 .... zp 250 260 350 400 .... Klingelnberg : pfs 62 pfs 500 600 pfsu 640 1200 1600 2500 maag : ph 40 ph 60 sp 60 ph 100 carl mahr : 891 t 891 s gleason : goulder micron il 600 il 600 sv osaka : osaka seimitsu david brown : 18 t frenco : sh 450 600

The technology used on our home use body composition monitors is based on the same advanced technology found in professional body composition analysers widely used bydoctors, medical centres and by professional athletic teams. It is a first choice for professionals.