Testing Equipment Dealers in Mulund East, Mumbai (68 products available)

• Voltage: 380V
• Type: Digital
• Frequency: 60 Hz
• Phase: Three
• Model Name/Number: ER300P
• Current: 60 Amp
• Current Type: AC

• Weight: pH Measurment
• Usage/Application: Laboratory
• Range: 0-14pH
• Temp. Compensation: Manual
• Temp.Range: 0°-100° C
• Power: 50 Hz 230 V

A flow meter is a device used to measure the flow rate or quantity of a gas or liquid moving through a pipe. Flow measurement applications are very diverse and each situation has its own constraints and engineering requirements. You can measure flow through a variety of different devices such as Coriolis and positive displacement meters.  

• Power: 10 Watt
• Voltage: 90-250V
• Frequency: 50/60Hz
• Operating Temperature: 15 to 45 deg C
• Capacity: 300g

• Country of Origin: Made in India
• Model Number: ASTM D -1525
• Temperature Range: 300 Degree C
• Material: Stainless Steel
• Voltage: 230 V
• Frequency: 50 Hz
• Phase: Single Phase

• Application: Earth Testing
• Dimensions: 172 x 98 x 38 mm
• Display: 3 1/2 Digits, LCD
• Weight: 575 gm
• Earth Ground Resistance: 20/200/2000 ohm

We are the leading exporters and supplier of this products.

• Type: Oxygen Monitor
• Application: Laboratory
• Weight: 0.25Kg. ( without battery)
• Maximum input Pressure: 100 PSI (6.89 bar).
• Gas inlet connector: 8 mm male PU fitting.
• Dimensions in inches: 19.7 W x 9.2 H x 6D (cm)

Features :  Fast Response. Accurate & reliable. Auto calibration. Operated on main supply. User selectable audiovisual alarm limits. Both upper & lower alarm limits selectable by only two key. Large backlight LCD. Compact size. Wall mountable. Battery backup(optional).

we are leading supplier of Breath Analyzer in mumbai..................................................

• Type: Data Loggers
• Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Color: Brown, Green, Grey, Maroon, Red, White
• Voltage: 3-6VDC, 6-9VDC, 9-12VDC
• Power Source: Battery, Electric
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

• Model Number: LMMP-30
• Resolution: 0.001,0.01,0.1pH, Selectable
• Supply Ability: 25 Piece/Pieces per Month
• Calibration Due Reminder: 1 to 30 days, Selectable
• Cell Constant: 0.1/1/10/User defined
• Measuring Mode: Absolute mV or Relative mV
• pH Range: -2.000-20.000pH
• Calibration Points: Up to 5 points
• Conductivity Range: 0-200mS/cm
• Port: Chennai

Balls are dropped through a pipe from predetermined heights with the help of mechanical or electromagnetic releasing jaws and slot on the pipe. Balls can be also fitted to a mild steel block and connected to a rope for pulling it back to the required height, up to 2 mtr.

Quality earth rods are commonly made from either solid copper, stainless steel or copperbonded steel. Three types of earth rod are available, but the copperbonded steel cored rod is by far the most popular, due to its combination of strength, corrosion resistance and comparatively low cost. Solid copper and stainless steel rods offer a very high level of corrosion resistance at the expense of lower strength and higher cost. Diameter of rodOne common misconception is that the diameter of the rod has a drastic effect on lowering earth resistance. This is not true! As the graph shows, you only lower the resistance value by 9.5 per cent by doubling the diameter of the rod (which means increasing the weight and the cost of the rod by approximately 400 percent). Thus the rationale is: Use the most economical rod that soil conditions will allow you to drive. This is one of the ways to ensure that you don’t waste money on over-dimensioned rods. Thread and shank diametersConfusion often arises between thread and shank diameters for threaded rods. The thread rolling process, used by quality rod manufacturers, raises the surface of the rod so that thread diameter is greater than shank diameter. All threads are Unified National Coarse (UNC-2A).

• Sterility Test Unit47mm Stainless Steel (3 Branch Sterility)   • Sterility Test Unit47mm Stainless Steel (6 Branch Sterility   • Oil Free Vacuum Pump suitable for above Sterility  Model - PCI-75-S  Max. Flow - 45 LPM, Vacuum - 27" Hg (680 mm)  Max. Pressure - 55 PSig, 1/4 HP

• TEMP. RANGE: -1°C to – 2°C
• EACH CHAMBER SIZE: 7” x 14” x 6”

The unit designed to meet the test method of ASTM D-2500-88D-97. For use to carry test of any petroleum oil as per test method. The bath is triple walled in construction with inner chamber made of stainless steel & exterior of G.I sheet duly finished in powder coated shade. The top surface of units is of hylembakelite thick sheet for easy cleaning. Each compartment having 4 test jacket made of copper cylindrical flat bottom -45 mm dia x 115 mm HT. Test jar made of clear cylindrical glass flat bottom 30 to 33.5 mm dia x 115 to 125 mm height. All 4 compartment having 4 cooling system which includes hermetically sealed compressor, condenser, fan motor etc- CFC free Cooling system. All 4 Compartment Temperature are being controlled by separate solid-state electronic temperature controller and Digital indicator. Selection of single, two or three chamber also.

Carbon Black Diapersion Tester is for analyzing dispersion of carbon. The microscope having line mark on the screen for measure the specimen. The hot plate retaining the S.S. cast plate for better heat distribution make thermal equilibrium of glass slides. The tong make very easy migration of slides from hotplate to microscope. The very operational ease instrument presenting here. CARBON BLACK CONTENT TESTER The carbon content in polyolefin and polyethylene more important as expressed as percentage. Because the utilization of carbon is not only as a pigment but also as UV absorber. The polyethylene material has tendency to be brittle in lower temp. which problem is eliminated by carbon. The higher percentage of carbon make material more loss in mechanical strength. So whatever which very necessary to control the percentage of carbon. It is rigid constructive carbon black content tester with custom made heater built in furnace has longer life. The glassware are of standard BOROSIL make.

• Application: Battery Testing
• Weight: 0-200gm, 400-600gm, 600-800gm
• Condition: New
• Power: 250W, 500W, 750W
• Driven Type: Battery
• Warranty: 5yrs

We are the celebrated Manufacturer & Supplier of HRD Battery Testers from Mumbai (India). The Battery HRD Testers, offered by us, are known for their reliable performance, longer service life and low maintenance. These Battery Testers are widely used for testing batteries of four wheelers. Our product range also comprises of Constant Current Battery Chargers, Automobile Battery Chargers and Motorcycle Battery Charger. For reasonable prices, contact us.   Features : Consistent performance Rugged in construction Requires less maintenance   Details : 32AH to 200AH load Capacity 10Sec. Timer for Auto cutoff Load Battery Status Indicator i.e. Good, Week, Bad Heavy Duty Battery Clips Size - 450 X 300 X 210mm Price - Approx Rs 6,700 / Piece

Prepaid Energy Meters are based on the principle of microcontroller application. The Microcontroller will accept the number of units recharged by the concerned department person, counts the number of units consumed by the customer and as soon as the customer exceeds the recharged amount, it will disconnect the power supply to the customer until the next recharge. Whenever the number of units in microcontroller becomes zero, microcontroller sends a signal to “Contact Maker Breaker circuit” which is nothing but the relay and this relay cuts off the power supply to the consumer until next recharge. Figure: Block diagram of on line pre paid energy meter

We are offering electro magnetic flow meters. Haris electromagnetic flow measurement system, takes care of all your flow measurement and monitoring needs with maximum efficiency. The system comprises of a magnetic flow tube and an electronic flow converter. Specially designed flow coils, generate a magnetic field in the flow tube. As the conductive fluid moves in this field, voltage proportional to the the velocity of fluid is generated in the electrodes. This voltage is received by the flow convertor, and digital signal processing is done before the flow value is displayed in the illuminated alphanumeric lcd.

It gives us immense pleasure to offer our clients an excellent assortment of glass dosing pumps and Sterility Test Equipment. These products are manufactured by making use of high grade stainless steel and mild steel and are compliant with the GMP standards. Furthermore, these products are extensively used in pharmaceutical, chemical, cosmetic and plastic industries.   Attributes: Trouble free functioning Longer service life Optimum performance.  

• Usage/Application: Workplace
• Brand: TSS
• Measurement Range: Up to 440 mg/100 ml
• Display: LCD Display
• Analyzing Time: 4 s
• Accuracy: 0.005% at 0.05% BAC
• Continuous Working Time: 7 hr
• Temperature Range: 5-40 Degree C
• Body Material: Plastic
• Display Type: LCD

• Feature: Easier operations,Precisely designed,Optimum performance,Elegant finish,Lightweight,Minimal maintenance

• Automation Grade: Automatic
• Accuracy (%): 1%
• Air Circulation: YES
• Capacity (L): 90
• Controller: Electronic
• Cooling Speed (c per min): 30 minutes

• Features: Longer operational life, Reliable performance, Sturdy construction

We offer zeiss surfocom surface roughness tester.

alcohol breath analyzers, cyanide antidote kits, Sound Level Meter

energy monitoring systems, Ac Drives, Mitsubishi Ac Drive, cements ac drive

sterility test apparatus, Membrane Filter Holder, HPLC Peek Tubing

chemical testing equipment, Air Dryer